In this review, we will be comparing C 95 II and S55, two Passive Floor-standing speakers from Jamo and Polk Audio. Let's have a brief look at the main features
of Jamo C 95 II and Polk S55 first before getting into our more
detailed comparison.
What size room are the Jamo C 95 II and Polk S55 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Jamo C 95 II and Polk S55 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both C 95 II and S55 are 2-way speakers.
| Driver |
Jamo C 95 II |
Polk S55 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
2 x 6-inch
|
2 x 6.5-inch
|
C 95 II features a 1" Tweeter and 2 x 6" Composite Woofer . On the other hand, the S55 features a 1" Terylene Dome Tweeter and 2 x 6.5" Mica-reinforced polypropylene Woofer with a Crossover frequency at 2500Hz.
Frequency Response
C 95 II has a frequency range of 37-24k Hz whereas S55 has a frequency range of 32-40k Hz. With a minimum frequency of 32Hz, the S55 can go significantly deeper on the low side and provide stronger bass compared to the C 95 II's min frequency of 37Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
C 95 II is a 6 ohms speaker compared to the S55 which has a nominal impedance of 8 ohms.
These two speakers also have different sensitivity levels. C 95 II sensitivity is rated at 89 dB and the S55's is rated at 90 dB. This 1 dB difference makes the Polk S55 a more sensitive speaker compared to Jamo C 95 II, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
C 95 II can handle a max power of 200 watts RMS from the amp the whereas C 95 II has a max power handling value of 165 watts RMS , 35 watts less than the S55.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Both C 95 II and S55 features dual binding post speaker terminals for bi-amping or bi-wiring.
Jamo C 95 II's Posts terminals allows Bi-amping or bi-wiring
Polk S55's 5-way post terminals allows Bi-amping or bi-wiring
Cabinet Type and Port Position
C 95 II has a rear firing port whereas S55 has a bottom firing ports. Polk S55's bottom-firing port gives more flexibility in placement in regards to proximity to walls compared to Jamo C 95 II with its rear-firing port.
Polk S55 Port
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Jamo C 95 II's and Polk S55's external dimensions. Jamo C 95 II has external dimensions of 982.0 x 247.0 x 383.0mm ( 38-5/8 x 9-11/16 x 15-1/16inch) whereas Polk S55 has external dimensions of 1056.0 x 299.0 x 315.0mm ( 41-9/16 x 11-3/4 x 12-3/8inch) .
Jamo C 95 II is 52mm narrower and 74mm shorter than Polk S55 but it is also 68mm deeper.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Jamo C 95 II is approximately 946.0cm2 / 146.6inch2 and base area of the Polk S55 is approximately 941.9cm2 / 146.0inch2. The C 95 II requires 0% more surface area than the S55 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Jamo C 95 II weighs 19.91kg / 43.8lbs and the Polk S55 weighs 20.00kg / 44lbs. This makes the S55 0% heavier than the C 95 II.
Here is a comparison of how C 95 II and S55's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
What's in the Box of Jamo C 95 II?
Here are the items that are included inside the box of C 95 II:
Floorstanding loudspeakerGrille4 Outrigger feet4 Spikes (pre-installed on outrigger feet)4 Rubber feet8 Machine screws2 Jumper-straps (pre-installed)Hex-keyUser ManualImportant Safety InstructionsWarranty Information
What's in the Box of Polk S55?
Here are the items that come with the S55:
Floorstanding loudspeakerGrille (attached)4 Feet (pre-installed)Owners ManualOnline Product Registration
 Height |
982mm
vs
1056mm
|
Easier to fit in smaller spaces |
 Max Input Power |
200 watts
vs
165 watts
|
Handle more power from your amplifier |
 Sensitivity |
90 dB
vs
89 dB
|
Play louder with same amount of amplification power |
 Nominal Impedance |
8 ohms
vs
6 ohms
|
Less selective with amplifiers |
 Woofer Size |
6.5 inches
vs
6 inches
|
Larger woofer |
| Low Frequency Response |
32 Hz
vs
37 Hz
|
Generates deeper bass |
 High Frequency Response |
40k Hz
vs
24k Hz
|
Generates higher frequency |
 Base Surface Area |
941cm2 (299x315mm)
vs
946cm2 (247x383mm)
|
Takes less floor space |
 Price per pair* |
658USD
vs
918USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Jamo Concert 9 Series C 95 II |
Polk Audio Signature S55 |
| Brand |
Jamo |
Polk Audio |
| Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
| Power Range |
50-165 watts |
20-200 watts |
| Sensitivity |
89 dB |
90 dB |
| Impedance |
6 ohms |
8 ohms |
| Frequency Response |
37-24k Hz |
32-40k Hz |
Drivers |
|
|
| Woofer Quantity |
2 |
2 |
| Woofer Size |
6" |
6.5" |
| Woofer Composition |
Composite |
Mica-reinforced polypropylene |
| Woofer Surround Material |
Rubber |
Butyl rubber |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
n/a |
Dome |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
n/a |
2500Hz |
| Firing Direction |
rear |
bottom |
Physical Specs |
|
|
| Height |
982.0mm (38.7") |
1056.0mm (41.6") |
| Width |
247.0mm (9.7") |
299.0mm (11.8") |
| Depth |
383.0mm (15.1") |
315.0mm (12.4") |
| Weight |
19.91kg (43.8lbs) |
20.00kg (44lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
MDF/Wood-grain vinyl |
Meddite MDF |
| Available Colors |
Black |
Black |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
Yes |
Yes |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |