In this review, we will be comparing Vela 2.0 VFS407.2-GB and Evoke 50, two Passive Floor-standing speakers from ELAC and Dynaudio. Let's have a brief look at the main features
of Elac Vela 2.0 VFS407.2-GB and Dynaudio Evoke 50 first before getting into our more
detailed comparison.
What size room are the Elac Vela 2.0 VFS407.2-GB and Dynaudio Evoke 50 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Elac Vela 2.0 VFS407.2-GB and Dynaudio Evoke 50 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Vela 2.0 VFS407.2-GB and Evoke 50 are 3-way speakers.
| Driver |
Elac Vela 2.0 VFS407.2-GB |
Dynaudio Evoke 50 |
|
Driver Setup
|
3-way
|
3-way
|
|
Tweeter
|
-inch
|
1.1-inch
|
|
Midrange
|
- |
1 x 5.5-inch |
|
Woofer
|
2 x 6-inch
|
2 x 7-inch
|
Vela 2.0 VFS407.2-GB features a " JET 6 AMT Tweeter and 2 x 6" AS XR cone Woofer with a Crossover frequency at 450Hz and 2400 Hz. On the other hand, the Evoke 50 features a 1.1" Tweeter , a 5.5" Midrange and 2 x 7" Magnesium Silicate Polymer Woofer with a Crossover frequency at 430Hz and 3500Hz.
Frequency Response
Vela 2.0 VFS407.2-GB has a frequency range of 30-50k Hz whereas Evoke 50 has a frequency range of 35-23k Hz. With a minimum frequency of 30Hz, the Vela 2.0 VFS407.2-GB can go significantly deeper on the low side and provide stronger bass compared to the Evoke 50's min frequency of 35Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
Elac Vela 2.0 VFS407.2-GB
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Vela 2.0 VFS407.2-GB and Evoke 50 have the same Impedance of 4 ohms but where they differ is the sensitivity levels. Vela 2.0 VFS407.2-GB sensitivity is rated at 88 dB and the Evoke 50's is at 87 dB. This 1 dB difference makes the Elac Vela 2.0 VFS407.2-GB a more sensitive speaker compared to Dynaudio Evoke 50, hence will play louder with the same amount of watts.
One thing to keep in mind that the lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit comared to higher impedance speakers especially at high volume levels, so make sure the amp you pair with the Vela 2.0 VFS407.2-GB and the Vela 2.0 VFS407.2-GB can provide this impedance level.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Vela 2.0 VFS407.2-GB can handle a max power of 260 watts RMS from the amp the whereas Vela 2.0 VFS407.2-GB has a max power handling value of 170 watts RMS , 90 watts less than the Evoke 50.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Cabinet Type and Port Position
Vela 2.0 VFS407.2-GB has a bottom firing port whereas Evoke 50 has a rear firing ports. Elac Vela 2.0 VFS407.2-GB's bottom-firing port gives more flexibility in placement in regards to proximity to walls compared to Dynaudio Evoke 50 with its rear-firing port.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Elac Vela 2.0 VFS407.2-GB's and Dynaudio Evoke 50's external dimensions. Elac Vela 2.0 VFS407.2-GB has external dimensions of 1000 x 229 x 266 mm ( 40 x 9 x 10.47 inches) whereas Dynaudio Evoke 50 has external dimensions of 1166.0 x 215.0 x 375.0mm ( 45-7/8 x 12-1/16 x 14-3/4inch) .
Elac Vela 2.0 VFS407.2-GB is 166mm shorter and 109mm less deeper than Dynaudio Evoke 50 but it is also 14mm wider.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Elac Vela 2.0 VFS407.2-GB is approximately 609.1cm2 / 94.4inch2 and base area of the Dynaudio Evoke 50 is approximately 806.3cm2 / 125.0inch2. The Vela 2.0 VFS407.2-GB requires 24% less surface area than the Evoke 50 which gives it a small advantage on placement in tight spaces.
What's in the Box of Dynaudio Evoke 50?
Here are the items that come with the Evoke 50:
Floorstanding loudspeakerGrille4 Outrigger feet4 Spikes4 Locking nuts8 Washers8 ScrewsFoam port plugHex-keyTweeter protection cover (pre-installed)Instructions for UseImportant Safety InstructionsWarranty Card