In this review, we will be comparing two different type of speakers . Elac Vela 2.0 VFS407.2-GB is a Floor-standing speaker whereas the Evoke 30 is a Bookshelf speaker.
Let's have a brief look at the main features
of Elac Vela 2.0 VFS407.2-GB and Dynaudio Evoke 20 first before getting into our more
detailed comparison.
Elac Vela 2.0 VFS407.2-GB Key Specs
- 3-way Design
- " JET 6 AMT Tweeter
- 2 x 6" AS XR cone Woofer
- 30-50k Hz Frequency Response
- 88 dB Sensitivity
- Impedance: 4ohms
- Power Range:Up to 170watts
- Weight:19.10kg
- Dimensions (H x W x D): 1000.0" x 9" x 10.5"( 1000 x 229 x 266 mm )
Dynaudio Evoke 20 Key Specs
- 2-way Design
- 1.1" Tweeter
- 7" Magnesium Silicate Polymer Woofer
- 40-23k Hz Frequency Response
- 86 dB Sensitivity
- Impedance: 6ohms
- Power Range:up to 180watts
- Weight:9.90kg
- Dimensions (H x W x D): 380.0" x 8.5" x 12.1"( 380.0 x 215.0 x 343.0mm )
What size room are the Elac Vela 2.0 VFS407.2-GB and Dynaudio Evoke 20 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
| Listening Environment* |
Elac Vela 2.0 VFS407.2-GB |
Dynaudio Evoke 20 |
| Near-field |
Bad |
Poor |
| Small Room |
Poor |
Average |
| Mid-size Room |
Average |
Good |
| Large Room |
Good |
Average |
| Very Large Room |
Average |
Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the Elac Vela 2.0 VFS407.2-GB and Dynaudio Evoke 20 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
One of the fundamental differences between these two speakers is that Vela 2.0 VFS407.2-GB is a 3-way design whereas the Evoke 30 is a 2-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
| Driver |
Elac Vela 2.0 VFS407.2-GB |
Dynaudio Evoke 20 |
|
Driver Setup
|
3-way
|
2-way
|
|
Tweeter
|
-inch
|
1.1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
2 x 6-inch
|
1 x 7-inch
|
Vela 2.0 VFS407.2-GB features a " JET 6 AMT Tweeter and 2 x 6" AS XR cone Woofer with a Crossover frequency at 450Hz and 2400 Hz. On the other hand, the Evoke 30 features a 1.1" Cerotar with Hexis Tweeter and 1 x 7" Magnesium Silicate Polymer Woofer with a Crossover frequency at 3200Hz.
Frequency Response
Vela 2.0 VFS407.2-GB has a frequency range of 30-50k Hz whereas Evoke 30 has a frequency range of 40-23k Hz. With a minimum frequency of 30Hz, the Vela 2.0 VFS407.2-GB can go significantly deeper on the low side and provide stronger bass compared to the Evoke 30's min frequency of 40Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
Elac Vela 2.0 VFS407.2-GB
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Vela 2.0 VFS407.2-GB is a 4 ohms speaker compared to the Evoke 30 which has a nominal impedance of 6 ohms. Lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit especially when played at high volume levels, so make sure the amp you pair with the Vela 2.0 VFS407.2-GB can provide this impedance level.
These two speakers also have different sensitivity levels. Vela 2.0 VFS407.2-GB sensitivity is rated at 88 dB and the Evoke 30's is rated at 86 dB. This 2 dB difference makes the Elac Vela 2.0 VFS407.2-GB a more sensitive speaker compared to Dynaudio Evoke 20, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Vela 2.0 VFS407.2-GB can handle a max power of 180 watts RMS from the amp the whereas Vela 2.0 VFS407.2-GB has a max power handling value of 170 watts RMS , 10 watts less than the Evoke 30.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Cabinet Type and Port Position
Vela 2.0 VFS407.2-GB has a bottom firing port whereas Evoke 30 has a rear firing ports. Elac Vela 2.0 VFS407.2-GB's bottom-firing port gives more flexibility in placement in regards to proximity to walls compared to Dynaudio Evoke 20 with its rear-firing port.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Elac Vela 2.0 VFS407.2-GB's and Dynaudio Evoke 20's external dimensions. Elac Vela 2.0 VFS407.2-GB has external dimensions of 1000 x 229 x 266 mm ( 40 x 9 x 10.47 inches) whereas Dynaudio Evoke 20 has external dimensions of 380.0 x 215.0 x 343.0mm ( 15 x 8.5 x 12.1inch) .
Dynaudio Evoke 20 is 14mm narrower and 620mm shorter than Elac Vela 2.0 VFS407.2-GB but it is also 77mm deeper.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Elac Vela 2.0 VFS407.2-GB is approximately 609.1cm2 / 94.4inch2 and base area of the Dynaudio Evoke 20 is approximately 737.5cm2 / 114.3inch2. The Vela 2.0 VFS407.2-GB requires 17% less surface area than the Evoke 30 which gives it a small advantage on placement in tight spaces.
What's in the Box of Dynaudio Evoke 20?
Here are the items that come with the Evoke 30:
Driver Setup 
Sensitivity 
Number of Woofers 
High Frequency Response 
Base Surface Area 
Max Input Power 
Nominal Impedance 
Height 
Price per pair*