In this review, we will be comparing Debut ConneX DCB41 and R-15PM, two Powered Bookshelf speakers from ELAC and Klipsch. Being Powered speakers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them.
Let's have a brief look at the main features
of ELAC Debut DCB41 and Klipsch R-15PM first before getting into our more
detailed comparison.
ELAC Debut DCB41 Key Specs
- 2-way Design
- 100-watt RMS Integrated Amplifier
- 0.75" Soft-Dome Tweeter
- 4.5" Polypropylene Woofer
- 66-25k Hz Frequency Response
- 24-bit Max Depth / 96 kHZ Max Sample Rate
- Built-in Bluetooth
- Weight:2.90kg
- Dimensions (H x W x D): 249.0" x 5.5625" x 9.4375"( 249 x 141 x 240mm )
Klipsch R-15PM Key Specs
- 2-way Design
- 100-watt RMS Integrated Amplifier
- 1.0" Hard-Dome Tweeter
- 5.25" Copper-spun IMG Woofer
- 62-24k Hz Frequency Response
- 24-bit Max Depth / 96 kHz Max Sample Rate
- Built-in 3.0 Bluetooth
- Weight:4.67kg
- Dimensions (H x W x D): 317.5" x 7" x 9.875"( 317.5 x 177.8 x 250.8mm )
In the following sections, we will get into more detail in order to better understand how the ELAC Debut DCB41 and Klipsch R-15PM compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Debut ConneX DCB41 and R-15PM are 2-way speakers.
| Driver |
ELAC Debut DCB41 |
Klipsch R-15PM |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
0.75-inch
|
1.0-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 4.5-inch
|
1 x 5.25-inch
|
Debut ConneX DCB41 features a 0.75" Fabric Soft-Dome Tweeter and 1 x 4.5" Polypropylene Woofer . On the other hand, the R-15PM features a 1.0" Aluminum Hard-Dome Tweeter and 1 x 5.25" Copper-spun IMG Woofer with a Crossover frequency at 1800Hz.
Frequency Response
Debut ConneX DCB41 has a frequency range of 66-25k Hz whereas R-15PM has a frequency range of 62-24k Hz. With a minimum frequency of 62Hz, the R-15PM can go slightly deeper then the Debut ConneX DCB41's min frequency of 66Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare ELAC Debut DCB41's and Klipsch R-15PM's external dimensions. ELAC Debut DCB41 has external dimensions of 249 x 141 x 240mm ( 9.8125inch x 5.5625inch x 9.4375inch ) whereas Klipsch R-15PM has external dimensions of 317.5 x 177.8 x 250.8mm ( 12.5 x 7 x 9.875inch) .
Klipsch R-15PM is clearly the larger of the two speakers. Its body is 36.8mm wider, 68.5mm taller and 10.8mm deeper than ELAC Debut DCB41.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the ELAC Debut DCB41 is approximately 338.4cm2 / 52.5inch2 and base area of the Klipsch R-15PM is approximately 445.9cm2 / 69.1inch2. The Debut ConneX DCB41 requires 24% less surface area than the R-15PM which gives it a small advantage on placement in tight spaces.