In this review, we will be comparing Debut 3.0 DC63 and Debut 3.0 DC53, two Passive Center Channel speakers by ELAC
Let's have a brief look at the main features
of ELAC Debut 3.0 DC63 and ELAC Debut 3.0 DC53 first before getting into our more
detailed comparison.
ELAC Debut 3.0 DC63 Key Specs
- 2-way Design
- 1" Hard-Dome Tweeter
- 2 x 6.5" Aramid fiber Woofer
- 50 to 38K Hz Frequency Response
- 87.5 dB Sensitivity
- Impedance: 6ohms
- Power Range:30 - 140watts
- Weight:10.73kg
- Dimensions (H x W x D): 197.0" x 21-1/16" x 12-1/4"( 197.0 x 535.0 x 312.0mm )
ELAC Debut 3.0 DC53 Key Specs
- 2-way Design
- 1" Hard-Dome Tweeter
- 2 x 5.25" Aramid fiber Woofer
- 57 to 38K Hz Frequency Response
- 87.5 dB Sensitivity
- Impedance: 4ohms
- Power Range:30 - 120watts
- Weight:8.73kg
- Dimensions (H x W x D): 174.0" x 19-1/16" x 9-3/4"( 174.0 x 485.0 x 248.0mm )
Debut 3.0 DC63 and Debut 3.0 DC53 are members of ELAC's Debut 3.0 series of speakers. Below you can find the loudspeakers from this series.
ELAC Debut 3.0 Series
History
What size room are the ELAC Debut 3.0 DC63 and ELAC Debut 3.0 DC53 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
ELAC Debut 3.0 DC63 |
ELAC Debut 3.0 DC53 |
| Near-field |
Poor |
Poor |
| Small Room |
Poor |
Average |
| Mid-size Room |
Good |
Good |
| Large Room |
Good |
Average |
| Very Large Room |
Average |
Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the ELAC Debut 3.0 DC63 and ELAC Debut 3.0 DC53 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Debut 3.0 DC63 and Debut 3.0 DC53 are 2-way speakers.
| Driver |
ELAC Debut 3.0 DC63 |
ELAC Debut 3.0 DC53 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
2 x 6.5-inch
|
2 x 5.25-inch
|
Debut 3.0 DC63 features a 1" Hard-Dome Tweeter and 2 x 6.5" Aramid fiber Woofer with a Crossover frequency at 2000Hz. On the other hand, the Debut 3.0 DC53 features a 1" Hard-Dome Tweeter and 2 x 5.25" Aramid fiber Woofer with a Crossover frequency at 1900Hz.
Frequency Response
Debut 3.0 DC63 has a frequency range of 50 to 38K Hz whereas Debut 3.0 DC53 has a frequency range of 57 to 38K Hz. With a minimum frequency of 50Hz, the Debut 3.0 DC63 can go significantly deeper on the low side and provide stronger bass compared to the Debut 3.0 DC53's min frequency of 57Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Center Channel class in our database.
Low Frequency
Center Channel Speakers
High Frequency
Center Channel Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Debut 3.0 DC63 is a 6 ohms speaker compared to the Debut 3.0 DC53 which has a nominal impedance of 4 ohms. Lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit especially when played at high volume levels, so make sure the amp you pair with the Debut 3.0 DC53 can provide this impedance level.
On the other hand, they have the same sensitivity of 87.5 dBdB.
Sensitivity
Center Channel Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
Debut 3.0 DC63 can handle a max power of 140 watts RMS from the amp the whereas Debut 3.0 DC53 has a max power handling value of 120 watts RMS, 20 watts less than the Debut 3.0 DC63.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Debut 3.0 DC63 features 5-Way post type posts and Debut 3.0 DC53 has a 5-Way post type posts. None of these speakers feature bi-amping/bi-wiring.
ELAC Debut 3.0 DC63's 5-Way post terminals
ELAC Debut 3.0 DC53's 5-Way post terminals
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare ELAC Debut 3.0 DC63's and ELAC Debut 3.0 DC53's external dimensions. ELAC Debut 3.0 DC63 has external dimensions of 197.0 x 535.0 x 312.0mm ( 7-3/4-inch x 21-1/16-inch x 12-1/4-inch) whereas ELAC Debut 3.0 DC53 has external dimensions of 174.0 x 485.0 x 248.0mm ( 6-13/16-inch x 19-1/16-inch x 9-3/4-inch) .
ELAC Debut 3.0 DC63 is clearly the larger of the two speakers. Its body is 50mm wider, 23mm taller and 64mm deeper than ELAC Debut 3.0 DC53.
Below you can see the front view size comparison of ELAC Debut 3.0 DC63 and ELAC Debut 3.0 DC53 in scale.
Comparison image of ELAC Debut 3.0 DC63 and ELAC Debut 3.0 DC53 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the ELAC Debut 3.0 DC63 is approximately 1669.2cm2 / 258.7inch2 and base area of the ELAC Debut 3.0 DC53 is approximately 1202.8cm2 / 186.4inch2. The Debut 3.0 DC63 requires 39% more surface area than the Debut 3.0 DC53 which gives it a small disadvantage on placement in tight spaces.