SpeakerDecision
  • SPEAKERS by TYPE
    • Passive Bookshelf Speakers
    • Passive Floor-standing Speakers
    • Passive Center Channel Speakers
    • Passive In-wall Speakers
    • All Passive Speakers
    • Powered Subwoofers
    • Powered Stereo Speakers
  • AMPLIFIERS
  • SMART FIND

ELAC Debut 2.0 B6.2 vs Revel M106 Comparison

x
Speaker to replace
Change

ELAC Debut 2.0 B6.2

Passive Bookshelf | 44-35k Hz

ELAC Debut 2.0 B6.2
CHECK PRICE
Change
    
Revel M106

Passive Bookshelf | 59Hz- 20kHz

Revel Performa3 M106
CHECK PRICE
ELAC Debut 2.0 B6.2 ELAC Debut 2.0 B6.2
See at AMAZON
Revel M106 Revel M106
See at AMAZON
ELAC Debut 2.0 B6.2
See at AMAZON
Revel M106
See at AMAZON
ELAC Debut 2.0 B6.2 vs Revel M106 Speaker Comparison

In this review, we will be comparing Debut 2.0 B6.2 and M106, two Passive Bookshelf speakers from ELAC and Revel.

Let's have a brief look at the main features of ELAC Debut 2.0 B6.2 and Revel M106 first before getting into our more detailed comparison.

ELAC Debut 2.0 B6.2 Key Specs

  • 2-way Design
  • 1" Soft-Dome Tweeter
  • 6.5" Woven Aramid-Fiber Woofer
  • 44-35k Hz Frequency Response
  • 87 dB Sensitivity
  • Impedance: 6ohms
  • Power Range:up to 120watts
  • Weight:7.40kg
  • Dimensions (H x W x D): 375.0" x 7-3/4" x 11-5/16"( 375.0 x 195.0 x 268.0mm )

Revel M106 Key Specs

  • 2-way Design
  • 1" Hard-Dome with Acoustic Lens Waveguide Tweeter
  • 6.5" Aluminum Woofer
  • 59Hz- 20kHz Frequency Response
  • 87 dB Sensitivity
  • Impedance: 8ohms
  • Power Range:50-150watts
  • Weight:8.41kg
  • Dimensions (H x W x D): 383.0" x 8-1/4" x 11"( 383.0 x 210.0 x 280.0mm )

What size room are the ELAC Debut 2.0 B6.2 and Revel M106 speakers good for?

The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:

Listening Environment* ELAC Debut 2.0 B6.2 Revel M106
Near-field Poor Poor
Small Room Average Average
Mid-size Room Good Good
Large Room Average Average
Very Large Room Poor Poor

(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2. Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)

In the following sections, we will get into more detail in order to better understand how the ELAC Debut 2.0 B6.2 and Revel M106 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.


**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.


Drivers

Both Debut 2.0 B6.2 and M106 are 2-way speakers.

Driver ELAC Debut 2.0 B6.2 Revel M106
Driver Setup 2-way 2-way
Tweeter 1-inch 1-inch
Midrange - -
Woofer 1 x 6.5-inch 1 x 6.5-inch

Debut 2.0 B6.2 features a 1" Cloth Soft-Dome Tweeter and 1 x 6.5" Woven Aramid-Fiber Woofer with a Crossover frequency at 2200Hz. On the other hand, the M106 features a 1" aluminum Hard-Dome with Acoustic Lens Waveguide Tweeter and 1 x 6.5" Aluminum Woofer with a Crossover frequency at 2300Hz.

Frequency Response

Debut 2.0 B6.2 has a frequency range of 44-35k Hz whereas M106 has a frequency range of 59Hz- 20kHz. With a minimum frequency of 44Hz, the Debut 2.0 B6.2 can go significantly deeper on the low side and provide stronger bass compared to the M106's min frequency of 59Hz.

Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.

Low Frequency

Bookshelf Speakers

Debut 2.0 B6.2
M106
Min
Average
Max
High Frequency

Bookshelf Speakers

ELAC Debut 2.0 B6.2
Revel M106
Min
Average
Max

None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.

Impedance and Sensitivity

Debut 2.0 B6.2 is a 6 ohms speaker compared to the M106 which has a nominal impedance of 8 ohms.

On the other hand, they have the same sensitivity of 87 dBdB.

Sensitivity

Bookshelf Speakers

Debut 2.0 B6.2
M106
Min
Average
Max

Power Range

Power range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.

Debut 2.0 B6.2 can handle a max power of 150 watts RMS from the amp the whereas Debut 2.0 B6.2 has a max power handling value of 120 watts RMS , 30 watts less than the M106.

Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters such as Impedance, sensitivity and system efficiencies.

Input Type and Bi-Amping / Bi-Wiring

Debut 2.0 B6.2 features Binding post type posts and M106 has a Binding post type posts. None of these speakers feature bi-amping/bi-wiring.

ELAC Debut 2.0 B6.2 Terminals
ELAC Debut 2.0 B6.2's 5-Way post terminals

Revel M106Binding post Terminals
Revel M106's Binding post terminals

Cabinet Type and Port Position

Debut 2.0 B6.2 has a front firing port whereas M106 has a rear firing ports. ELAC Debut 2.0 B6.2's front-firing port gives more flexibility in placement in regards to proximity to walls compared to Revel M106 with its rear-firing port.

Physical Specs

Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare ELAC Debut 2.0 B6.2's and Revel M106's external dimensions. ELAC Debut 2.0 B6.2 has external dimensions of 375.0 x 195.0 x 268.0mm ( 14.7 x 7.6 x 10.5inch) whereas Revel M106 has external dimensions of 383.0 x 210.0 x 280.0mm ( 15-1/16 x 8-1/4 x 11inch) .

Revel M106 is clearly the larger of the two speakers. Its body is 15mm wider, 8mm taller and 12mm deeper than ELAC Debut 2.0 B6.2.

Below you can see the front view size comparison of ELAC Debut 2.0 B6.2 and Revel M106 in scale.

ELAC Debut 2.0 B6.2 vs Revel M106 Size Comparison - Front View
Comparison image of ELAC Debut 2.0 B6.2 and Revel M106 Size and External Dimensions

Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited. The base surface area of the ELAC Debut 2.0 B6.2 is approximately 522.6cm2 / 81.0inch2 and base area of the Revel M106 is approximately 588.0cm2 / 91.1inch2. The Debut 2.0 B6.2 requires 11% less surface area than the M106 which gives it a small advantage on placement in tight spaces.

Here is an another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:

ELAC Debut 2.0 B6.2 vs Revel M106 Size Comparison on a Media Console
Size Comparison image of ELAC Debut 2.0 B6.2 and Revel M106 on a Media Console
Weight Comparison

The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The ELAC Debut 2.0 B6.2 weighs 7.40kg / 16.3lbs and the Revel M106 weighs 8.41kg / 18.5lbs. This makes the M106 14% heavier than the Debut 2.0 B6.2.

Here is a comparison of how Debut 2.0 B6.2 and M106's weights compare with the average, max and min weights in Passive Bookshelf class.

Weight
All Bookshelf Speakers
ELAC Debut 2.0 B6.2
Revel M106
Min
Average
Max

What's in the Box of ELAC Debut 2.0 B6.2?

Here are the items that are included inside the box of Debut 2.0 B6.2:
  • 2 Bookshelf loudspeakers
  • 2 Grilles
  • Operating Instructions
  • What's in the Box of Revel M106?

    Here are the items that come with the M106:
  • Bookshelf loudspeaker
  • Grille
  • Foam port plug
  • Owners Manual

  • Reasons to choose ELAC Debut 2.0 B6.2 over Revel Performa3 M106
    Low Frequency Response 44 Hz vs 59 Hz Generates deeper bass
    High Frequency Response 35k Hz vs 20k Hz Generates higher frequency
    Port Position Front vs Rear Gives more flexibility placing close to walls
    Height 375mm vs 383mm Easier to fit in smaller spaces
    Base Surface Area 522cm2 vs 588cm2 Takes less floor space
    Price per pair* 400USD vs 2200USD costs less (*prices may change depending on the seller, location and time)

    Reasons to choose Revel Performa3 M106 over ELAC Debut 2.0 B6.2

    Max Input Power 150 watts vs 120 watts Handle more power from your amplifier
    Nominal Impedance 8 ohms vs 6 ohms Less selective with amplifiers
    ELAC Debut 2.0 B6.2 vs Revel M106 Specs Table
    Detailed comparison of specifications
    General ELAC Debut 2.0 B6.2 Revel Performa3 M106
    Brand ELAC Revel
    Speaker Type Bookshelf speakers Bookshelf speakers
    Power Range up to 120 watts 50-150 watts
    Sensitivity 87 dB 87 dB
    Impedance 6 ohms 8 ohms
    Frequency Response 44-35k Hz 59Hz- 20kHz
    Drivers
    Woofer Quantity 1 1
    Woofer Size 6.5" 6.5"
    Woofer Composition Woven Aramid-Fiber Aluminum
    Woofer Surround Material Rubber Rubber
    Tweeter Size 1" 1"
    Tweeter Type Soft-Dome Hard-Dome with Acoustic Lens Waveguide
    Aimable Tweeter No No
    Midrange Driver No No
    Crossover Frequency 2200Hz 2300Hz
    Firing Direction front rear
    Physical Specs
    Height 375.0mm (14.8") 383.0mm (15.1")
    Width 195.0mm (7.7") 210.0mm (8.3")
    Depth 268.0mm (10.6") 280.0mm (11")
    Weight 7.40kg (16.3lbs) 8.41kg (18.5lbs)
    Enclosure Ported Bass Reflex
    Finish MDF/Vinyl Wood/Lacquer
    Available Colors Black Gloss Walnut,Piano Black
    Mounting Bracket No No
    Recommended Stand Height 24-28" 24-25"
    Grille Yes Yes
    Moisture Resistancy No No
    Connections
    Biamp Inputs No No
    Other
    Parts Warranty 3 Years 5 Years
    Labor Warranty 3 Years 5 Years

    Most Popular Speakers
    Klipsch Reference R-51M
    Klipsch R-51M
    2-way | 93 dB | 8 ohms
    Wharfedale Elysian 2
    Wharfedale Elysian 2
    3-way | 89 dB | 4 ohms
    ELAC Debut 2.0 B6.2
    ELAC Debut 2.0 B6.2
    2-way | 87 dB | 6 ohms
    Bowers & Wilkins 606 S2 Anniversary Edition
    B&W 606 S2
    2-way | 88 dB | 8 ohms
    KEF Q150
    KEF Q150
    2-way | 86 dB | 8 ohms
    Klipsch Reference Premiere RP-500M
    Klipsch RP-500M
    2-way | 93 dB | 8 ohms
    Wharfedale EVO4.1
    Wharfedale EVO4.1
    2-way | 87 dB | 8 ohms
    Bowers & Wilkins 606
    B&W 606
    2-way | 88 dB | 8 ohms
    Copyright © 2025 by SpeakerDecision
    About Privacy Contact US Camera Decision

    Report a Correction