In this review, we will be comparing Evoke 30 and LINTON Heritage, two Passive Bookshelf speakers from Dynaudio and Wharfedale. Let's have a brief look at the main features
of Dynaudio Evoke 20 and Wharfedale LINTON first before getting into our more
detailed comparison.
What size room are the Dynaudio Evoke 20 and Wharfedale LINTON speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Dynaudio Evoke 20 and Wharfedale LINTON compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
One of the fundamental differences between these two speakers is that Evoke 30 is a 2-way design whereas the LINTON Heritage is a 3-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
| Driver |
Dynaudio Evoke 20 |
Wharfedale LINTON |
|
Driver Setup
|
2-way
|
3-way
|
|
Tweeter
|
1.1-inch
|
1-inch
|
|
Midrange
|
- |
1 x 5-inch |
|
Woofer
|
1 x 7-inch
|
1 x 8-inch
|
Evoke 30 features a 1.1" Cerotar with Hexis Tweeter and 1 x 7" Magnesium Silicate Polymer Woofer with a Crossover frequency at 3200Hz. On the other hand, the LINTON Heritage features a 1" woven textile Soft-dome Tweeter , a 5" Midrange and 1 x 8" Woven Kevlar Woofer with a Crossover frequency at 630Hz and 2400Hz.
Frequency Response
Evoke 30 has a frequency range of 40-23k Hz whereas LINTON Heritage has a frequency range of 40-20k Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Evoke 30 and LINTON Heritage have the same Impedance of 6 ohms but where they differ is the sensitivity levels. Evoke 30 sensitivity is rated at 86 dB and the LINTON Heritage's is at 90 dB. This 4 dB difference makes the Wharfedale LINTON a more sensitive speaker compared to Dynaudio Evoke 20, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Evoke 30 can handle a max power of 200 watts RMS from the amp the whereas Evoke 30 has a max power handling value of 180 watts RMS , 20 watts less than the LINTON Heritage.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Evoke 30 features Post type posts and LINTON Heritage has a Post type posts. None of these speakers feature bi-amping/bi-wiring.
Dynaudio Evoke 20's Binding post terminals
Wharfedale LINTON's Post terminals
Cabinet Type and Port Position
Both Evoke 30 and LINTON Heritage have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Dynaudio Evoke 20's and Wharfedale LINTON's external dimensions. Dynaudio Evoke 20 has external dimensions of 380.0 x 215.0 x 343.0mm ( 15 x 8.5 x 12.1inch) whereas Wharfedale LINTON has external dimensions of 565.0 x 300.0 x 360.0mm ( 22.2 x 11.8 x 12.9inch) .
Wharfedale LINTON is clearly the larger of the two speakers. Its body is 85mm wider, 185mm taller and 17mm deeper than Dynaudio Evoke 20.
Below you can see the front view size comparison of Dynaudio Evoke 20 and Wharfedale LINTON in scale.
Comparison image of Dynaudio Evoke 20 and Wharfedale LINTON Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Dynaudio Evoke 20 is approximately 737.5cm2 / 114.3inch2 and base area of the Wharfedale LINTON is approximately 990.0cm2 / 153.5inch2. The Evoke 30 requires 26% less surface area than the LINTON Heritage which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Dynaudio Evoke 20 weighs 9.90kg / 21.8lbs and the Wharfedale LINTON weighs 18.40kg / 40.5lbs. This makes the LINTON Heritage 86% heavier than the Evoke 30.
Here is a comparison of how Evoke 30 and LINTON Heritage's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Dynaudio Evoke 20?
Here are the items that are included inside the box of Evoke 30:
What's in the Box of Wharfedale LINTON?
Here are the items that come with the LINTON Heritage:
Bookshelf loudspeaker Grille (pre-installed) 4 Self-adhesive rubber feet Pair of white gloves User's Manual
 High Frequency Response |
23k Hz
vs
20k Hz
|
Generates higher frequency |
 Height |
380mm
vs
565mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
737cm2 (215x343mm)
vs
990cm2 (300x360mm)
|
Takes less floor space |
 Max Input Power |
200 watts
vs
180 watts
|
Handle more power from your amplifier |
 Driver Setup |
3-way
vs
2-way
|
Have a dedicated mid-range driver |
 Sensitivity |
90 dB
vs
86 dB
|
Play louder with same amount of amplification power |
 Woofer Size |
8 inches
vs
7 inches
|
Larger woofer |
 Price per pair* |
1500USD
vs
4798USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Dynaudio Evoke 20 |
Wharfedale LINTON Heritage |
| Brand |
Dynaudio |
Wharfedale |
| Speaker Type |
Floor-standing speaker |
Bookshelf speakers |
| Power Range |
up to 180 watts |
25-200 watts |
| Sensitivity |
86 dB |
90 dB |
| Impedance |
6 ohms |
6 ohms |
| Impedance |
n/a |
3.5 ohms |
| Frequency Response |
40-23k Hz |
40-20k Hz |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
7" |
8" |
| Woofer Composition |
Magnesium Silicate Polymer |
Woven Kevlar |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
1.1" |
1" |
| Tweeter Type |
n/a |
Soft-dome |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
5" |
| Crossover Frequency |
3200Hz |
630Hz and 2400Hz |
| Firing Direction |
rear |
rear |
Physical Specs |
|
|
| Height |
380.0mm (15") |
565.0mm (22.2") |
| Width |
215.0mm (8.5") |
300.0mm (11.8") |
| Depth |
343.0mm (13.5") |
360.0mm (14.2") |
| Weight |
9.90kg (21.8lbs) |
18.40kg (40.5lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
MDF/Wood veneer |
MDF/Wood Veneer |
| Available Colors |
Black |
Walnut, Red Mahogany, Black |
| Mounting Bracket |
No |
No |
| Recommended Stand Height |
n/a |
18-22" |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
No |
No |
Other |
|
|
| Parts Warranty |
5 Years (8 Years registered) |
5 Years |
| Labor Warranty |
5 Years (8 Years registered) |
5 Years |