In this review, we will be comparing Evoke 30 and L100 Classic, two Passive Bookshelf speakers from Dynaudio and JBL. Let's have a brief look at the main features
of Dynaudio Evoke 20 and JBL L100 Classic first before getting into our more
detailed comparison.
What size room are the Dynaudio Evoke 20 and JBL L100 Classic speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Dynaudio Evoke 20 and JBL L100 Classic compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
One of the fundamental differences between these two speakers is that Evoke 30 is a 2-way design whereas the L100 Classic is a 3-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
| Driver |
Dynaudio Evoke 20 |
JBL L100 Classic |
|
Driver Setup
|
2-way
|
3-way
|
|
Tweeter
|
1.1-inch
|
1-inch
|
|
Midrange
|
- |
1 x 5.25-inch |
|
Woofer
|
1 x 7-inch
|
1 x 12-inch
|
Evoke 30 features a 1.1" Cerotar with Hexis Tweeter and 1 x 7" Magnesium Silicate Polymer Woofer with a Crossover frequency at 3200Hz. On the other hand, the L100 Classic features a 1" Titanium Dome Tweeter , a 5.25" Midrange and 1 x 12" Pulp Woofer with a Crossover frequency at 450Hz and 3500Hz.
Frequency Response
Evoke 30 has a frequency range of 40-23k Hz whereas L100 Classic has a frequency range of 40-40k Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Evoke 30 is a 6 ohms speaker compared to the L100 Classic which has a nominal impedance of 4 ohms. Lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit especially when played at high volume levels, so make sure the amp you pair with the L100 Classic can provide this impedance level.
These two speakers also have different sensitivity levels. Evoke 30 sensitivity is rated at 86 dB and the L100 Classic's is rated at 90 dB. This 4 dB difference makes the JBL L100 Classic a more sensitive speaker compared to Dynaudio Evoke 20, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Evoke 30 can handle a max power of 200 watts RMS from the amp the whereas Evoke 30 has a max power handling value of 180 watts RMS , 20 watts less than the L100 Classic.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Evoke 30 features Five-way gold-plated binding posts type posts and L100 Classic has a Five-way gold-plated binding posts type posts. None of these speakers feature bi-amping/bi-wiring.
Dynaudio Evoke 20's Binding post terminals
JBL L100 Classic's Five-way gold-plated binding posts terminals
Cabinet Type and Port Position
Evoke 30 has a rear firing port whereas L100 Classic has a front firing ports. JBL L100 Classic's front-firing port gives more flexibility in placement in regards to proximity to walls compared to Dynaudio Evoke 20 with its rear-firing port.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Dynaudio Evoke 20's and JBL L100 Classic's external dimensions. Dynaudio Evoke 20 has external dimensions of 380.0 x 215.0 x 343.0mm ( 15 x 8.5 x 12.1inch) whereas JBL L100 Classic has external dimensions of 636.5 x 389.6 x 371.5mm ( 25.0 x 15.3 x 14.6inch) .
JBL L100 Classic is clearly the larger of the two speakers. Its body is 174.6mm wider, 256.5mm taller and 28.5mm deeper than Dynaudio Evoke 20.
Below you can see the front view size comparison of Dynaudio Evoke 20 and JBL L100 Classic in scale.
Comparison image of Dynaudio Evoke 20 and JBL L100 Classic Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Dynaudio Evoke 20 is approximately 737.5cm2 / 114.3inch2 and base area of the JBL L100 Classic is approximately 1447.4cm2 / 224.3inch2. The Evoke 30 requires 49% less surface area than the L100 Classic which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Dynaudio Evoke 20 weighs 9.90kg / 21.8lbs and the JBL L100 Classic weighs 26.70kg / 58.7lbs. This makes the L100 Classic 170% heavier than the Evoke 30.
Here is a comparison of how Evoke 30 and L100 Classic's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Dynaudio Evoke 20?
Here are the items that are included inside the box of Evoke 30:
What's in the Box of JBL L100 Classic?
Here are the items that come with the L100 Classic:
Bookshelf loudspeaker
Grille
Owner's Manual
 Nominal Impedance |
6 ohms
vs
4 ohms
|
Less selective with amplifiers |
 Height |
380mm
vs
636mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
737cm2 (215x343mm)
vs
1447cm2 (389x371mm)
|
Takes less floor space |
 Max Input Power |
200 watts
vs
180 watts
|
Handle more power from your amplifier |
 Driver Setup |
3-way
vs
2-way
|
Have a dedicated mid-range driver |
 Sensitivity |
90 dB
vs
86 dB
|
Play louder with same amount of amplification power |
 Woofer Size |
12 inches
vs
7 inches
|
Larger woofer |
 High Frequency Response |
40k Hz
vs
23k Hz
|
Generates higher frequency |
 Port Position |
Front
vs
Rear
|
Gives more flexibility placing close to walls |
 Price per pair* |
4400USD
vs
4798USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Dynaudio Evoke 20 |
JBL L100 Classic |
| Brand |
Dynaudio |
JBL |
| Speaker Type |
Floor-standing speaker |
Bookshelf speakers |
| Power Range |
up to 180 watts |
25-200 watts |
| Sensitivity |
86 dB |
90 dB |
| Impedance |
6 ohms |
4 ohms |
| Frequency Response |
40-23k Hz |
40-40k Hz |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
7" |
12" |
| Woofer Composition |
Magnesium Silicate Polymer |
Pulp |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
1.1" |
1" |
| Tweeter Type |
n/a |
Dome |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
5.25" |
| Crossover Frequency |
3200Hz |
450Hz and 3500Hz |
| Firing Direction |
rear |
front |
Physical Specs |
|
|
| Height |
380.0mm (15") |
636.5mm (25.1") |
| Width |
215.0mm (8.5") |
389.6mm (15.3") |
| Depth |
343.0mm (13.5") |
371.5mm (14.6") |
| Weight |
9.90kg (21.8lbs) |
26.70kg (58.7lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
MDF/Wood veneer |
Genuine walnut veneer |
| Available Colors |
Black |
Walnut |
| Mounting Bracket |
No |
No |
| Recommended Stand Height |
n/a |
18" |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
No |
No |
Other |
|
|
| Parts Warranty |
5 Years (8 Years registered) |
5 Years |
| Labor Warranty |
5 Years (8 Years registered) |
5 Years |