In this review, we will be comparing Dymension DM10 and RP-500C II, two Passive Center Channel speakers from Definitive Technology and Klipsch. Let's have a brief look at the main features
of Definitive Dymension DM10 and Klipsch RP-500C II first before getting into our more
detailed comparison.
What size room are the Definitive Dymension DM10 and Klipsch RP-500C II speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Definitive Dymension DM10 and Klipsch RP-500C II compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Dymension DM10 and RP-500C II are 2-way speakers.
| Driver |
Definitive Dymension DM10 |
Klipsch RP-500C II |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
2 x 5.25-inch
|
2 x 5.25-inch
|
Dymension DM10 features a 1" aluminum oxide Hard-Dome Tweeter and 2 x 5.25" Polypropelene Woofer . On the other hand, the RP-500C II features a 1" titanium Tractrix Horn Tweeter and 2 x 5.25" Cerametallic cone Woofer with a Crossover frequency at 1630 Hz.
Frequency Response
Dymension DM10 has a frequency range of 81-23 kHz whereas RP-500C II has a frequency range of 60-25k Hz. With a minimum frequency of 60Hz, the RP-500C II can go significantly deeper on the low side and provide stronger bass compared to the Dymension DM10's min frequency of 81Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Center Channel class in our database.
Low Frequency
Center Channel Speakers
High Frequency
Center Channel Speakers
Definitive Dymension DM10
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Dymension DM10 is a 4 ohms speaker compared to the RP-500C II which has a nominal impedance of 8 ohms. Lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit especially when played at high volume levels, so make sure the amp you pair with the Dymension DM10 can provide this impedance level.
These two speakers also have different sensitivity levels. Dymension DM10 sensitivity is rated at 90 dB and the RP-500C II's is rated at 96 dB. This 6 dB difference makes the Klipsch RP-500C II a more sensitive speaker compared to Definitive Dymension DM10, hence will play louder with the same amount of watts.
Sensitivity
Center Channel Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Dymension DM10 can handle a max power of 200 watts RMS from the amp the whereas RP-500C II has a max power handling value of 100 watts RMS, 100 watts less than the Dymension DM10.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Dymension DM10 features Binding post type posts and RP-500C II has a Binding post type posts. None of these speakers feature bi-amping/bi-wiring.
Definitive Dymension DM10's Binding post terminals
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Definitive Dymension DM10's and Klipsch RP-500C II's external dimensions. Definitive Dymension DM10 has external dimensions of 186 x 496 x 311 mm ( 7.3 x 19.5 x 12.2 in) whereas Klipsch RP-500C II has external dimensions of 177.0 x 494.0 x 269.0mm ( 6-15/16 x 19-7/16 x 10-9/16inch) .
Definitive Dymension DM10 is clearly the larger of the two speakers. Its body is 2mm wider, 9mm taller and 42mm deeper than Klipsch RP-500C II.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Definitive Dymension DM10 is approximately 1542.6cm2 / 239.1inch2 and base area of the Klipsch RP-500C II is approximately 1328.9cm2 / 206.0inch2. The Dymension DM10 requires 16% more surface area than the RP-500C II which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Definitive Dymension DM10 weighs 13.20kg / 29lbs and the Klipsch RP-500C II weighs 8.20kg / 18lbs. This makes the Dymension DM10 61% heavier than the RP-500C II.
Here is a comparison of how Dymension DM10 and RP-500C II's weights compare with the average, max and min weights in Passive Center Channel class.
Weight
All Center Channel Speakers
Definitive Dymension DM10
What's in the Box of Klipsch RP-500C II?
Here are the items that come with the RP-500C II:
Center channel loudspeakerGrilleTilt rod (attached nut)User ManualImportant Safety InstructionsWarranty Information
 Max Input Power |
200 watts
vs
100 watts
|
Handle more power from your amplifier |
 Passive Radiator |
1 x 9-inch
vs
None
|
Increases the bass performance |
 Sensitivity |
96 dB
vs
90 dB
|
Play louder with same amount of amplification power |
 Nominal Impedance |
8 ohms
vs
4 ohms
|
Less selective with amplifiers |
 Low Frequency Response |
60 Hz
vs
81 Hz
|
Generates deeper bass |
 High Frequency Response |
25k Hz
vs
23k Hz
|
Generates higher frequency |
 Height |
177mm
vs
186mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1328cm2 (494x269mm)
vs
1542cm2 (496x311mm)
|
Takes less floor space |
 Price per pair* |
499USD
vs
699USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Definitive Technology Dymension DM10 |
Klipsch Reference Premiere RP-500C II |
| Brand |
Definitive Technology |
Klipsch |
| Speaker Type |
Center channel speaker |
Center channel speaker |
| Power Range |
50-200 watts |
up to 100 watts |
| Sensitivity |
90 dB |
96 dB |
| Impedance |
4 ohms |
8 ohms |
| Frequency Response |
81-23 kHz |
60-25k Hz |
Drivers |
|
|
| Woofer Quantity |
2 |
2 |
| Woofer Size |
5.25" |
5.25" |
| Woofer Composition |
Polypropelene |
Cerametallic cone |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
Hard-Dome |
Tractrix Horn |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
n/a |
1630 Hz |
| Firing Direction |
n/a |
rear |
Physical Specs |
|
|
| Height |
186.0mm (7.3") |
177.0mm (7") |
| Width |
496.0mm (19.5") |
494.0mm (19.4") |
| Depth |
311.0mm (12.2") |
269.0mm (10.6") |
| Weight |
13.20kg (29lbs) |
8.20kg (18lbs) |
| Enclosure |
Passive Radiator |
Bass Reflex |
| Finish |
n/a |
MDF/Wood-grain vinyl |
| Available Colors |
Black |
Walnut, Black |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
No |
No |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |