In this review, we will be comparing Dymension DM10 and Airmotiv C3+, two Passive Center Channel speakers from Definitive Technology and Emotiva. Let's have a brief look at the main features
of Definitive Dymension DM10 and Emotiva Airmotiv C3+ first before getting into our more
detailed comparison.
What size room are the Definitive Dymension DM10 and Emotiva Airmotiv C3+ speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Definitive Dymension DM10 and Emotiva Airmotiv C3+ compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
One of the fundamental differences between these two speakers is that Dymension DM10 is a 2-way design whereas the Airmotiv C3+ is a 3-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
Driver |
Definitive Dymension DM10 |
Emotiva Airmotiv C3+ |
Driver Setup
|
2-way
|
3-way
|
Tweeter
|
1-inch
|
25×32 mm-inch
|
Midrange
|
- |
2 x 5.25-inch |
Woofer
|
2 x 5.25-inch
|
4 x 6.5-inch
|
Dymension DM10 features a 1" aluminum oxide Hard-Dome Tweeter and 2 x 5.25" Polypropelene Woofer . On the other hand, the Airmotiv C3+ features a 25×32 mm" folded ribbon Tweeter , a 5.25" Midrange and 4 x 6.5" woven fiber cone Woofer with a Crossover frequency at 350 Hz and 2800Hz.
Frequency Response
Dymension DM10 has a frequency range of 81-23 kHz whereas Airmotiv C3+ has a frequency range of 40 Hz – 28 kHz. With a minimum frequency of 40Hz, the Airmotiv C3+ can go significantly deeper on the low side and provide stronger bass compared to the Dymension DM10's min frequency of 81Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Center Channel class in our database.
Low Frequency
Center Channel Speakers
High Frequency
Center Channel Speakers
Definitive Dymension DM10
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Dymension DM10 and Airmotiv C3+ have the same Impedance of 4 ohms but where they differ is the sensitivity levels. Dymension DM10 sensitivity is rated at 90 dB and the Airmotiv C3+'s is at 92 dB. This 2 dB difference makes the Emotiva Airmotiv C3+ a more sensitive speaker compared to Definitive Dymension DM10, hence will play louder with the same amount of watts.
One thing to keep in mind that the lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit comared to higher impedance speakers especially at high volume levels, so make sure the amp you pair with the Dymension DM10 and the Dymension DM10 can provide this impedance level.
Sensitivity
Center Channel Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Airmotiv C3+ features Binding post posts which make bi-amping or bi-wiring possible. Dymension DM10 has a Binding post which doesn't feature bi-amping/bi-wiring.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Definitive Dymension DM10's and Emotiva Airmotiv C3+'s external dimensions. Definitive Dymension DM10 has external dimensions of 186 x 496 x 311 mm ( 7.3 x 19.5 x 12.2 in) whereas Emotiva Airmotiv C3+ has external dimensions of 220.0 x 1391.0 x 312.0mm ( 8-5/8-inch x 54-3/4-inch x 12-1/4-inch) .
Emotiva Airmotiv C3+ is clearly the larger of the two speakers. Its body is 895mm wider, 34mm taller and 1mm deeper than Definitive Dymension DM10.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Definitive Dymension DM10 is approximately 1542.6cm2 / 239.1inch2 and base area of the Emotiva Airmotiv C3+ is approximately 4339.9cm2 / 672.7inch2. The Dymension DM10 requires 64% less surface area than the Airmotiv C3+ which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Definitive Dymension DM10 weighs 13.20kg / 29lbs and the Emotiva Airmotiv C3+ weighs 26.80kg / 59lbs. This makes the Airmotiv C3+ 103% heavier than the Dymension DM10.
Here is a comparison of how Dymension DM10 and Airmotiv C3+'s weights compare with the average, max and min weights in Passive Center Channel class.
Weight
All Center Channel Speakers
Definitive Dymension DM10
Passive Radiator |
1 x 9-inch
vs
None
|
Increases the bass performance |
Height |
186mm
vs
220mm
|
Easier to fit in smaller spaces |
Base Surface Area |
1542cm2 (496x311mm)
vs
4339cm2 (1391x312mm)
|
Takes less floor space |
Price per pair* |
699USD
vs
899USD
|
costs less (*prices may change depending on the seller, location and time) |
Driver Setup |
3-way
vs
2-way
|
Have a dedicated mid-range driver |
Sensitivity |
92 dB
vs
90 dB
|
Play louder with same amount of amplification power |
Woofer Size |
6.5 inches
vs
5.25 inches
|
Larger woofer |
Number of Woofers |
4
vs
2
|
More woofers |
Low Frequency Response |
40 Hz
vs
81 Hz
|
Generates deeper bass |
High Frequency Response |
28k Hz
vs
23k Hz
|
Generates higher frequency |
Bi-Amping and Bi-Wiring |
Yes
vs
No
|
Allows bi-amping and bi-wiring connections |
General |
Definitive Technology Dymension DM10 |
Emotiva Airmotiv C3+ |
Brand |
Definitive Technology |
Emotiva |
Speaker Type |
Center channel speaker |
Center channel speaker |
Power Range |
50-200 watts |
Up to 200 watts |
Sensitivity |
90 dB |
92 dB |
Impedance |
4 ohms |
4 ohms |
Frequency Response |
81-23 kHz |
40 Hz – 28 kHz |
Drivers |
|
|
Woofer Quantity |
2 |
4 |
Woofer Size |
5.25" |
6.5" |
Woofer Composition |
Polypropelene |
woven fiber cone |
Woofer Surround Material |
Rubber |
n/a |
Tweeter Size |
1" |
25×32 mm" |
Tweeter Type |
Hard-Dome |
folded ribbon |
Aimable Tweeter |
No |
No |
Midrange Driver |
No |
5.25" |
Crossover Frequency |
n/a |
350 Hz and 2800Hz |
Firing Direction |
n/a |
rear |
Physical Specs |
|
|
Height |
186.0mm (7.3") |
220.0mm (8.7") |
Width |
496.0mm (19.5") |
1391.0mm (54.8") |
Depth |
311.0mm (12.2") |
312.0mm (12.3") |
Weight |
13.20kg (29lbs) |
26.80kg (59lbs) |
Enclosure |
Passive Radiator |
Bass reflex |
Finish |
n/a |
HDF |
Available Colors |
Black |
Black |
Grille |
Yes |
Yes |
Moisture Resistancy |
No |
No |
Connections |
|
|
Biamp Inputs |
No |
Yes |
Other |
|
|
Parts Warranty |
5 Years |
5 Years |
Labor Warranty |
5 Years |
5 Years |