In this review, we will be comparing P300 and 706 S2, two Passive Bookshelf speakers from Buchardt and Bowers Wilkins. Let's have a brief look at the main features
of Buchardt P300 and B&W 706 S2 first before getting into our more
detailed comparison.
What size room are the Buchardt P300 and B&W 706 S2 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Buchardt P300 and B&W 706 S2 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both P300 and 706 S2 are 2-way speakers.
| Driver |
Buchardt P300 |
B&W 706 S2 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
0.74-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 6-inch
|
1 x 6.5-inch
|
P300 features a 0.74" Custom fine weave soft fabric textile with CDC aluminum waveguide aluminum waveguide Tweeter and 1 x 6" paper Woofer with a Crossover frequency at 2900Hz. On the other hand, the 706 S2 features a 1" Decoupled Soft-Dome Tweeter and 1 x 6.5" Continuum Woofer .
Frequency Response
P300 has a frequency range of 37-40k HZ whereas 706 S2 has a frequency range of 50-28k Hz. With a minimum frequency of 37Hz, the P300 can go significantly deeper on the low side and provide stronger bass compared to the 706 S2's min frequency of 50Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
P300 is a 4 ohms speaker compared to the 706 S2 which has a nominal impedance of 8 ohms. Lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit especially when played at high volume levels, so make sure the amp you pair with the P300 can provide this impedance level.
These two speakers also have different sensitivity levels. P300 sensitivity is rated at 86 dB and the 706 S2's is rated at 88 dB. This 2 dB difference makes the B&W 706 S2 a more sensitive speaker compared to Buchardt P300, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
P300 can handle a max power of 200 watts RMS from the amp the whereas 706 S2 has a max power handling value of 120 watts RMS, 80 watts less than the P300.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Buchardt P300's and B&W 706 S2's external dimensions. Buchardt P300 has external dimensions of 365.0 x 180.0 x 280.0mm ( 14.4 x 7 x 11inch) whereas B&W 706 S2 has external dimensions of 340.0 x 200.0 x 301.0mm ( 13.5-inch x 7.8-inch x 11.-inch) .
Buchardt P300 is 20mm narrower and 21mm less deeper than B&W 706 S2 but it is also 25mm taller.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Buchardt P300 is approximately 504.0cm2 / 78.1inch2 and base area of the B&W 706 S2 is approximately 602.0cm2 / 93.3inch2. The P300 requires 16% less surface area than the 706 S2 which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Buchardt P300 weighs 6.30kg / 13.9lbs and the B&W 706 S2 weighs 8.05kg / 17.7lbs. This makes the 706 S2 28% heavier than the P300.
Here is a comparison of how P300 and 706 S2's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of B&W 706 S2?
Here are the items that come with the 706 S2:
2 Bookshelf loudspeakers2 Grilles2 Two-piece foam port plugs8 Self-adhesive rubber feet4 Jumper-straps Manual Bowers & Wilkins brochureWarranty Information
 Max Input Power |
200 watts
vs
120 watts
|
Handle more power from your amplifier |
 Low Frequency Response |
37 Hz
vs
50 Hz
|
Generates deeper bass |
 High Frequency Response |
40k Hz
vs
28k Hz
|
Generates higher frequency |
 Passive Radiator |
one 5x8-inch
vs
None
|
Increases the bass performance |
 Base Surface Area |
504cm2 (180x280mm)
vs
602cm2 (200x301mm)
|
Takes less floor space |
 Price per pair* |
1450USD
vs
1999USD
|
costs less (*prices may change depending on the seller, location and time) |
 Sensitivity |
88 dB
vs
86 dB
|
Play louder with same amount of amplification power |
 Nominal Impedance |
8 ohms
vs
4 ohms
|
Less selective with amplifiers |
| Woofer Size |
6.5 inches
vs
6 inches
|
Larger woofer |
 Height |
340mm
vs
365mm
|
Easier to fit in smaller spaces |
| General |
Buchardt P300 |
Bowers & Wilkins 706 S2 |
| Brand |
Buchardt |
Bowers Wilkins |
| Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
| Power Range |
50 - 200 watts |
30-120 watts |
| Sensitivity |
86 dB |
88 dB |
| Impedance |
4 ohms |
8 ohms |
| Impedance |
n/a |
3.7 ohms |
| Frequency Response |
37-40k HZ |
50-28k Hz |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
6" |
6.5" |
| Woofer Composition |
paper |
Continuum |
| Woofer Surround Material |
n/a |
Rubber |
| Tweeter Size |
0.74" |
1" |
| Tweeter Type |
aluminum waveguide |
Decoupled Soft-Dome |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
2900Hz |
n/a |
| Firing Direction |
n/a |
rear |
Physical Specs |
|
|
| Height |
365.0mm (14.4") |
340.0mm (13.4") |
| Width |
180.0mm (7.1") |
200.0mm (7.9") |
| Depth |
280.0mm (11") |
301.0mm (11.9") |
| Weight |
6.30kg (13.9lbs) |
8.05kg (17.7lbs) |
| Enclosure |
Passive Radiator |
Bass Reflex |
| Finish |
15mm Fiberboard HMR.E2 Moisture-proof with internal bracing |
MDF/Wood Veneer |
| Available Colors |
Black, White, Peach, Ocean, Olive |
Rosewood, Gloss Black, Satin White |
| Mounting Bracket |
No |
No |
| Recommended Stand Height |
n/a |
24-26" |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
n/a |
Yes |
Other |
|
|
| Parts Warranty |
10 years on speakers / 2 years on electronics (4 years if registered) |
5 Years |
| Labor Warranty |
10 years on speakers / 2 years on electronics (4 years if registered) |
5 Years |