In this review, we will be comparing Elysian 4 and R7, two Passive Floor-standing speakers from Wharfedale and KEF.
Let's have a brief look at the main features
of Wharfedale Elysian 4 and KEF R7 first before getting into our more
detailed comparison.
Wharfedale Elysian 4 Key Specs
- 3-way Design
- 27x90mm" AMT (Ribbon) Tweeter
- 6" Midrange
- 2 x 8.5" Coated Fiberglass Woofer
- 30-22k Hz Frequency Response
- 92 dB Sensitivity
- Impedance: 4ohms
- Power Range:15-250watts
- Weight:49.60kg
- Dimensions (H x W x D): 1188.0" x 15-13/16" x 18-3/16"( 1188.0 x 402.0 x 462.0mm )
KEF R7 Key Specs
- 3-way Design
- 1" Dome Tweeter
- 5" Midrange
- 2 x 6.5" Hybrid Aluminum Woofer
- 5" Midrange
- 48-28k Hz Frequency Response
- 88 dB Sensitivity
- Impedance: 8ohms
- Power Range:15-250watts
- Weight:31.40kg
- Dimensions (H x W x D): 1113.0" x 8" x 15-5/16"( 1113.0 x 200.0 x 389.0mm )
What size room are the Wharfedale Elysian 4 and KEF R7 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Wharfedale Elysian 4 |
KEF R7 |
| Near-field |
Bad |
Bad |
| Small Room |
Poor |
Poor |
| Mid-size Room |
Average |
Average |
| Large Room |
Good |
Good |
| Very Large Room |
Average |
Average |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the Wharfedale Elysian 4 and KEF R7 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Elysian 4 and R7 are 3-way speakers.
| Driver |
Wharfedale Elysian 4 |
KEF R7 |
|
Driver Setup
|
3-way
|
3-way
|
|
Tweeter
|
27x90mm-inch
|
1-inch
|
|
Midrange
|
1 x 6-inch |
1 x 5-inch |
|
Woofer
|
2 x 8.5-inch
|
2 x 6.5-inch
|
Elysian 4 features a 27x90mm" AMT (Ribbon) Tweeter , a 6" Midrange and 2 x 8.5" Coated Fiberglass Woofer with a Crossover frequency at 340Hz and 3100Hz. On the other hand, the R7 features a 1" aluminum Dome Tweeter , a 5" Midrange and 2 x 6.5" Hybrid Aluminum Woofer with a Crossover frequency at 400Hz and 2900Hz.
Frequency Response
Elysian 4 has a frequency range of 30-22k Hz whereas R7 has a frequency range of 48-28k Hz. With a minimum frequency of 30Hz, the Elysian 4 can go significantly deeper on the low side and provide stronger bass compared to the R7's min frequency of 48Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Elysian 4 is a 4 ohms speaker compared to the R7 which has a nominal impedance of 8 ohms. Lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit especially when played at high volume levels, so make sure the amp you pair with the Elysian 4 can provide this impedance level.
These two speakers also have different sensitivity levels. Elysian 4 sensitivity is rated at 92 dB and the R7's is rated at 88 dB. This 4 dB difference makes the Wharfedale Elysian 4 a more sensitive speaker compared to KEF R7, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
Elysian 4 and R7 has the same power range of 15-250 watts.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Both Elysian 4 and R7 features dual binding post speaker terminals for bi-amping or bi-wiring.
KEF R7's Binding post terminals allows Bi-amping or bi-wiring
Cabinet Type and Port Position
Elysian 4 has a bottom firing port whereas R7 has a rear firing ports. Wharfedale Elysian 4's bottom-firing port gives more flexibility in placement in regards to proximity to walls compared to KEF R7 with its rear-firing port.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Wharfedale Elysian 4's and KEF R7's external dimensions. Wharfedale Elysian 4 has external dimensions of 1188.0 x 402.0 x 462.0mm ( 46-3/4 x 15-13/16 x 18-3/16inch) whereas KEF R7 has external dimensions of 1113.0 x 200.0 x 389.0mm ( 43-13/16 x 8 x 15-5/16inch) .
Wharfedale Elysian 4 is clearly the larger of the two speakers. Its body is 202mm wider, 75mm taller and 73mm deeper than KEF R7.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Wharfedale Elysian 4 is approximately 1857.2cm2 / 287.9inch2 and base area of the KEF R7 is approximately 778.0cm2 / 120.6inch2. The Elysian 4 requires 139% more surface area than the R7 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Wharfedale Elysian 4 weighs 49.60kg / 109.1lbs and the KEF R7 weighs 31.40kg / 69.1lbs. This makes the Elysian 4 58% heavier than the R7.
Here is a comparison of how Elysian 4 and R7's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
What's in the Box of Wharfedale Elysian 4?
Here are the items that are included inside the box of Elysian 4:
Floorstanding loudspeakerGrille2 Terminal-jumpers (pre-installed)4 Spike feetUser Manual
What's in the Box of KEF R7?
Here are the items that come with the R7:
Floorstanding loudspeakerGrille2 Foam port plugs4 Outrigger feet4 Spikes4 Protective discs4 Screws4 WashersWrenchHex-keyUser ManualWarranty Information
 Sensitivity |
92 dB
vs
88 dB
|
Play louder with same amount of amplification power |
 Woofer Size |
8.5 inches
vs
6.5 inches
|
Larger woofer |
|
Low Frequency Response |
30 Hz
vs
48 Hz
|
Generates deeper bass |
 Nominal Impedance |
8 ohms
vs
4 ohms
|
Less selective with amplifiers |
 High Frequency Response |
28k Hz
vs
22k Hz
|
Generates higher frequency |
 Height |
1113mm
vs
1188mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
778cm2
vs
1857cm2
|
Takes less floor space |
 Price per pair* |
4500USD
vs
9996USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Wharfedale Elysian 4 |
KEF R7 |
| Brand |
Wharfedale |
KEF |
| Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
| Power Range |
15-250 watts |
15-250 watts |
| Sensitivity |
92 dB |
88 dB |
| Impedance |
4 ohms |
8 ohms |
| Impedance |
n/a |
3.2 ohms |
| Frequency Response |
30-22k Hz |
48-28k Hz |
Drivers |
|
|
| Woofer Quantity |
2 |
2 |
| Woofer Size |
8.5" |
6.5" |
| Woofer Composition |
Coated Fiberglass |
Hybrid Aluminum |
| Woofer Surround Material |
Foamed Rubber |
Rubber |
| Tweeter Size |
27x90mm" |
1" |
| Tweeter Type |
AMT (Ribbon) |
Dome |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
6" |
5" |
| Crossover Frequency |
340Hz and 3100Hz |
400Hz and 2900Hz |
| Firing Direction |
bottom |
rear |
Physical Specs |
|
|
| Height |
1188.0mm (46.8") |
1113.0mm (43.8") |
| Width |
402.0mm (15.8") |
200.0mm (7.9") |
| Depth |
462.0mm (18.2") |
389.0mm (15.3") |
| Weight |
49.60kg (109.1lbs) |
31.40kg (69.1lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
MDF/Lacquer |
MDF/Lacquer |
| Available Colors |
Piano Black, Piano Walnut,White |
Black Gloss, White Gloss, Walnut |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
Yes |
Yes |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |