In this review, we will be comparing EVO5.2 and EVO4.2, two Passive Bookshelf speakers by Wharfedale
Let's have a brief look at the main features
of Wharfedale EVO5.2 and Wharfedale EVO4.2 first before getting into our more
detailed comparison.
Wharfedale EVO5.2 Key Specs
- 3-way Design
- 1.375" AMT (Ribbon) Tweeter
- 2" Midrange
- 6.5" woven Kevlar Woofer
- 44-24k Hz Frequency Response
- 88 dB Sensitivity
- Impedance: 4ohms
- Power Range:25-120watts
- Weight:15.00kg
- Dimensions (H x W x D): 497.0" x 10.2" x 15.4"( 497.0 x 260.0 x 350.0mm )
Wharfedale EVO4.2 Key Specs
- 3-way Design
- 1.18x2.36" AMT (Ribbon) Tweeter
- 2" Midrange
- 6.5" Kevlar Woofer
- 2" Midrange
- 54-22k Hz Frequency Response
- 88 dB Sensitivity
- Impedance: 8ohms
- Power Range:25-120watts
- Weight:13.40kg
- Dimensions (H x W x D): 455.0" x 9.8" x 13.7"( 455.0 x 250.0 x 350.0mm )
What size room are the Wharfedale EVO5.2 and Wharfedale EVO4.2 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Wharfedale EVO5.2 |
Wharfedale EVO4.2 |
| Near-field |
Poor |
Poor |
| Small Room |
Average |
Average |
| Mid-size Room |
Good |
Good |
| Large Room |
Average |
Average |
| Very Large Room |
Poor |
Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the Wharfedale EVO5.2 and Wharfedale EVO4.2 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both EVO5.2 and EVO4.2 are 3-way speakers.
| Driver |
Wharfedale EVO5.2 |
Wharfedale EVO4.2 |
|
Driver Setup
|
3-way
|
3-way
|
|
Tweeter
|
1.375-inch
|
1.18x2.36-inch
|
|
Midrange
|
1 x 2-inch |
1 x 2-inch |
|
Woofer
|
1 x 6.5-inch
|
1 x 6.5-inch
|
EVO5.2 features a 1.375" SilentWeave cotton and felt damping fiber AMT (Ribbon) Tweeter , a 2" Midrange and 1 x 6.5" woven Kevlar Woofer with a Crossover frequency at 800 Hz and 4.3 kHz. On the other hand, the EVO4.2 features a 1.18x2.36" AMT (Ribbon) Tweeter , a 2" Midrange and 1 x 6.5" Kevlar Woofer .
Frequency Response
EVO5.2 has a frequency range of 44-24k Hz whereas EVO4.2 has a frequency range of 54-22k Hz. With a minimum frequency of 44Hz, the EVO5.2 can go significantly deeper on the low side and provide stronger bass compared to the EVO4.2's min frequency of 54Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
EVO5.2 is a 4 ohms speaker compared to the EVO4.2 which has a nominal impedance of 8 ohms. Lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit especially when played at high volume levels, so make sure the amp you pair with the EVO5.2 can provide this impedance level.
On the other hand, they have the same sensitivity of 88 dBdB.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
EVO5.2 and EVO4.2 has the same power range of 25-120 watts.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
EVO4.2 features Binding post posts which make bi-amping or bi-wiring possible. EVO5.2 has a Binding post which doesn't feature bi-amping/bi-wiring.
Wharfedale EVO5.2's Binding post terminals
Cabinet Type and Port Position
Both EVO5.2 and EVO4.2 have bottom firing ports.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Wharfedale EVO5.2's and Wharfedale EVO4.2's external dimensions. Wharfedale EVO5.2 has external dimensions of 497.0 x 260.0 x 350.0mm ( 19.6" × 10.2" × 15.4") whereas Wharfedale EVO4.2 has external dimensions of 455.0 x 250.0 x 350.0mm ( 17.9 x 9.8 x 13.7inch) .
Wharfedale EVO4.2 is 10mm narrower and 42mm shorter than Wharfedale EVO5.2 but they have the same thickness of 350.0mm.
Below you can see the front view size comparison of Wharfedale EVO5.2 and Wharfedale EVO4.2 in scale.
Comparison image of Wharfedale EVO5.2 and Wharfedale EVO4.2 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Wharfedale EVO5.2 is approximately 910.0cm2 / 141.1inch2 and base area of the Wharfedale EVO4.2 is approximately 875.0cm2 / 135.6inch2. The EVO5.2 requires 4% more surface area than the EVO4.2 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Wharfedale EVO5.2 weighs 15.00kg / 33lbs and the Wharfedale EVO4.2 weighs 13.40kg / 29.5lbs. This makes the EVO5.2 12% heavier than the EVO4.2.
Here is a comparison of how EVO5.2 and EVO4.2's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Wharfedale EVO5.2?
Here are the items that are included inside the box of EVO5.2:
2 Bookshelf loudspeakers 2 Grilles 4 Jumper-bars (pre-installed) 8 Self-adhesive rubber feet Pair of white cloth gloves User Manual
What's in the Box of Wharfedale EVO4.2?
Here are the items that come with the EVO4.2:
2 Bookshelf loudspeakers 2 Grilles 4 Jumper-bars (pre-installed) 8 Self-adhesive rubber feet Pair of white cloth gloves User Manual
 Low Frequency Response |
44 Hz
vs
54 Hz
|
Generates deeper bass |
 High Frequency Response |
24k Hz
vs
22k Hz
|
Generates higher frequency |
 Nominal Impedance |
8 ohms
vs
4 ohms
|
Less selective with amplifiers |
 Minimum Impedance |
4 ohms
vs
3.2 ohms
|
Very low impedance levels puts more pressure on amplifier |
 Bi-Amping and Bi-Wiring |
Yes
vs
No
|
Allows bi-amping and bi-wiring connections |
 Height |
455mm
vs
497mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
875cm2
vs
910cm2
|
Takes less floor space |
 Price per pair* |
1199USD
vs
1299USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Wharfedale EVO5.2 |
Wharfedale EVO4.2 |
| Brand |
Wharfedale |
Wharfedale |
| Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
| Power Range |
25-120 watts |
25-120 watts |
| Sensitivity |
88 dB |
88 dB |
| Impedance |
4 ohms |
8 ohms |
| Impedance |
3.2 ohms |
4 ohms |
| Frequency Response |
44-24k Hz |
54-22k Hz |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
6.5" |
6.5" |
| Woofer Composition |
woven Kevlar |
Kevlar |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
1.375" |
1.18x2.36" |
| Tweeter Type |
AMT (Ribbon) |
AMT (Ribbon) |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
2" |
2" |
| Crossover Frequency |
800 Hz and 4.3 kHz |
n/a |
| Firing Direction |
bottom |
bottom |
Physical Specs |
|
|
| Height |
497.0mm (19.6") |
455.0mm (17.9") |
| Width |
260.0mm (10.2") |
250.0mm (9.8") |
| Depth |
350.0mm (13.8") |
350.0mm (13.8") |
| Weight |
15.00kg (33lbs) |
13.40kg (29.5lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
MDF/Wood-veneer |
MDF/Wood-veneer |
| Available Colors |
Walnut, Grey. Black, White |
Walnut,Black,White |
| Mounting Bracket |
No |
No |
| Recommended Stand Height |
18-22" |
18-22" |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
No |
Yes |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |