In this review, we will be comparing Diamond 220 and L200, two Passive Bookshelf speakers from Wharfedale and Polk Audio. Let's have a brief look at the main features
of Wharfedale 220 and Polk L200 first before getting into our more
detailed comparison.
What size room are the Wharfedale 220 and Polk L200 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Wharfedale 220 and Polk L200 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Diamond 220 and L200 are 2-way speakers.
Driver |
Wharfedale 220 |
Polk L200 |
Driver Setup
|
2-way
|
2-way
|
Tweeter
|
1-inch
|
1-inch
|
Midrange
|
- |
- |
Woofer
|
1 x 5-inch
|
1 x 6.5-inch
|
Diamond 220 features a 1" Dome Tweeter and 1 x 5" Woven Kevlar Woofer with a Crossover frequency at 2200Hz. On the other hand, the L200 features a 1" Ring Radiator Tweeter and 1 x 6.5" Polypropylene Woofer with a Crossover frequency at 2600Hz.
Frequency Response
Diamond 220 has a frequency range of 56-20k Hz whereas L200 has a frequency range of 46-38k Hz. With a minimum frequency of 46Hz, the L200 can go significantly deeper on the low side and provide stronger bass compared to the Diamond 220's min frequency of 56Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Diamond 220 is a 8 ohms speaker compared to the L200 which has a nominal impedance of 4 ohms. Lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit especially when played at high volume levels, so make sure the amp you pair with the L200 can provide this impedance level.
These two speakers also have different sensitivity levels. Diamond 220 sensitivity is rated at 86 dB and the L200's is rated at 85.5 dB.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Diamond 220 can handle a max power of 200 watts RMS from the amp the whereas Diamond 220 has a max power handling value of 100 watts RMS , 100 watts less than the L200.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Both Diamond 220 and L200 features dual binding post speaker terminals for bi-amping or bi-wiring.
Cabinet Type and Port Position
Diamond 220 has a bottom firing port whereas L200 has a rear firing ports. Wharfedale 220's bottom-firing port gives more flexibility in placement in regards to proximity to walls compared to Polk L200 with its rear-firing port.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Wharfedale 220's and Polk L200's external dimensions. Wharfedale 220 has external dimensions of 315.0 x 174.0 x 255.0mm ( 12.4 x 6.8 x 10.0inch) whereas Polk L200 has external dimensions of 399.0 x 213.0 x 339.0mm ( 15-11/16 x 8-3/8 x 13-5/16inch) .
Polk L200 is clearly the larger of the two speakers. Its body is 39mm wider, 84mm taller and 84mm deeper than Wharfedale 220.
Below you can see the front view size comparison of Wharfedale 220 and Polk L200 in scale.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Wharfedale 220 is approximately 443.7cm2 / 68.8inch2 and base area of the Polk L200 is approximately 722.1cm2 / 111.9inch2. The Diamond 220 requires 39% less surface area than the L200 which gives it a small advantage on placement in tight spaces.
Here is an another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Wharfedale 220 weighs 5.32kg / 11.7lbs and the Polk L200 weighs 10.00kg / 22lbs. This makes the L200 88% heavier than the Diamond 220.
Here is a comparison of how Diamond 220 and L200's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Wharfedale 220?
Here are the items that are included inside the box of Diamond 220:
2 Bookshelf loudspeakers 2 Grilles (pre-installed) 8 Self-adhesive rubber feet User's Manual Installation Guide
What's in the Box of Polk L200?
Here are the items that come with the L200:
2 Bookshelf loudspeakers 2 Grilles Cleaning cloth Owners Manual Online Registration
Nominal Impedance |
8 ohms
vs
4 ohms
|
Less selective with amplifiers |
Minimum Impedance |
4.1 ohms
vs
3 ohms
|
Very low impedance levels puts more pressure on amplifier |
Height |
315mm
vs
399mm
|
Easier to fit in smaller spaces |
Base Surface Area |
443cm2 (174x255mm)
vs
722cm2 (213x339mm)
|
Takes less floor space |
Price per pair* |
249USD
vs
1499USD
|
costs less (*prices may change depending on the seller, location and time) |
Max Input Power |
200 watts
vs
100 watts
|
Handle more power from your amplifier |
Woofer Size |
6.5 inches
vs
5 inches
|
Larger woofer |
Low Frequency Response |
46 Hz
vs
56 Hz
|
Generates deeper bass |
High Frequency Response |
38k Hz
vs
20k Hz
|
Generates higher frequency |
General |
Wharfedale Diamond 220 |
Polk Audio Legend L200 |
Brand |
Wharfedale |
Polk Audio |
Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
Power Range |
25-100 watts |
30-200 watts |
Sensitivity |
86 dB |
85.5 dB |
Impedance |
8 ohms |
4 ohms |
Impedance |
4.1 ohms |
3 ohms |
Frequency Response |
56-20k Hz |
46-38k Hz |
Drivers |
|
|
Woofer Quantity |
1 |
1 |
Woofer Size |
5" |
6.5" |
Woofer Composition |
Woven Kevlar |
Polypropylene |
Woofer Surround Material |
Rubber |
Rubber |
Tweeter Size |
1" |
1" |
Tweeter Type |
Dome |
Ring Radiator |
Aimable Tweeter |
No |
No |
Midrange Driver |
No |
No |
Crossover Frequency |
2200Hz |
2600Hz |
Firing Direction |
bottom |
rear |
Physical Specs |
|
|
Height |
315.0mm (12.4") |
399.0mm (15.7") |
Width |
174.0mm (6.9") |
213.0mm (8.4") |
Depth |
255.0mm (10") |
339.0mm (13.3") |
Weight |
5.32kg (11.7lbs) |
10.00kg (22lbs) |
Enclosure |
Bass Reflex |
Bass Reflex |
Finish |
MDF/Wood veneer |
MDF/Wood veneer |
Available Colors |
Black, White, Walnut |
Brown Walnut, Black Ash |
Mounting Bracket |
No |
No |
Recommended Stand Height |
24" |
22-26" |
Grille |
Yes |
Yes |
Moisture Resistancy |
No |
No |
Connections |
|
|
Biamp Inputs |
Yes |
Yes |
Other |
|
|
Parts Warranty |
5 Years |
5 Years |
Labor Warranty |
5 Years |
5 Years |