In this review, we will be comparing Diamond 220 and S 803, two Passive Bookshelf speakers from Wharfedale and Jamo. Let's have a brief look at the main features
of Wharfedale 220 and Jamo S 803 first before getting into our more
detailed comparison.
Wharfedale 220 Key Specs
- 2-way Design
- 1" Dome Tweeter
- 5" Woven Kevlar Woofer
- 56-20k Hz Frequency Response
- 86 dB Sensitivity
- Impedance: 8ohms
- Power Range:25-100watts
- Weight:5.32kg
- Dimensions (H x W x D): 315.0" x 6.8" x 10.0"( 315.0 x 174.0 x 255.0mm )
Jamo S 803 Key Specs
- 2-way Design
- 1" Soft-Dome Tweeter
- 5" Aluminized Polyfiber Woofer
- 57-26k Hz Frequency Response
- 87 dB Sensitivity
- Impedance: 8ohms
- Power Range:up to 80watts
- Weight:5.40kg
- Dimensions (H x W x D): 353.0" x 7.5" x 9.9"( 353.0 x 191.0 x 252.0mm )
What size room are the Wharfedale 220 and Jamo S 803 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
| Listening Environment* |
Wharfedale 220 |
Jamo S 803 |
| Near-field |
Average |
Average |
| Small Room |
Good |
Good |
| Mid-size Room |
Average |
Average |
| Large Room |
Poor |
Poor |
| Very Large Room |
Bad |
Bad |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the Wharfedale 220 and Jamo S 803 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Diamond 220 and S 803 are 2-way speakers.
| Driver |
Wharfedale 220 |
Jamo S 803 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 5-inch
|
1 x 5-inch
|
Diamond 220 features a 1" Dome Tweeter and 1 x 5" Woven Kevlar Woofer with a Crossover frequency at 2200Hz. On the other hand, the S 803 features a 1" Soft-Dome Tweeter and 1 x 5" Aluminized Polyfiber Woofer .
Frequency Response
Diamond 220 has a frequency range of 56-20k Hz whereas S 803 has a frequency range of 57-26k Hz. With a minimum frequency of 56Hz, the Diamond 220 can go slightly deeper then the S 803's min frequency of 57Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Diamond 220 and S 803 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. Diamond 220 sensitivity is rated at 86 dB and the S 803's is at 87 dB. This 1 dB difference makes the Jamo S 803 a more sensitive speaker compared to Wharfedale 220, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Diamond 220 can handle a max power of 100 watts RMS from the amp the whereas S 803 has a max power handling value of 80 watts RMS, 20 watts less than the Diamond 220.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Diamond 220 features Post posts which make bi-amping or bi-wiring possible. S 803 has a Post which doesn't feature bi-amping/bi-wiring.
Wharfedale 220's Post terminals allows Bi-amping or bi-wiring
Jamo S 803's Post terminals
Cabinet Type and Port Position
Diamond 220 has a bottom firing port whereas S 803 has a front firing ports. Jamo S 803's front-firing port gives more flexibility in placement in regards to proximity to walls compared to Wharfedale 220 with its rear-firing port.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Wharfedale 220's and Jamo S 803's external dimensions. Wharfedale 220 has external dimensions of 315.0 x 174.0 x 255.0mm ( 12.4 x 6.8 x 10.0inch) whereas Jamo S 803 has external dimensions of 353.0 x 191.0 x 252.0mm ( 13.8 x 7.5 x 9.9inch) .
Wharfedale 220 is 17mm narrower and 38mm shorter than Jamo S 803 but it is also 3mm deeper.
Below you can see the front view size comparison of Wharfedale 220 and Jamo S 803 in scale.
Comparison image of Wharfedale 220 and Jamo S 803 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Wharfedale 220 is approximately 443.7cm2 / 68.8inch2 and base area of the Jamo S 803 is approximately 481.3cm2 / 74.6inch2. The Diamond 220 requires 8% less surface area than the S 803 which gives it a small advantage on placement in tight spaces.
Here is an another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:
Size Comparison image of Wharfedale 220 and Jamo S 803 on a Media Console
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Wharfedale 220 weighs 5.32kg / 11.7lbs and the Jamo S 803 weighs 5.40kg / 11.9lbs. This makes the S 803 2% heavier than the Diamond 220.
Here is a comparison of how Diamond 220 and S 803's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Wharfedale 220?
Here are the items that are included inside the box of Diamond 220:
2 Bookshelf loudspeakers 2 Grilles (pre-installed) 8 Self-adhesive rubber feet User's Manual Installation Guide
What's in the Box of Jamo S 803?
Here are the items that come with the S 803:
2 Bookshelf loudspeakers 2 Grilles User Manual Important Safety Instructions Warranty Information