In this review, we will be comparing Diamond 12.3 and XT70, two Passive Floor-standing speakers from Wharfedale and Polk Audio.
Let's have a brief look at the main features
of Wharfedale Diamond 12.3 and Polk XT70 first before getting into our more
detailed comparison.
Wharfedale Diamond 12.3 Key Specs
- 2-way Design
- 1" Soft-Dome Tweeter
- 2 x 5" Mica-infused polypropylene Woofer
- 45-20k Hz Frequency Response
- 88 dB Sensitivity
- Impedance: 8ohms
- Power Range:30-150watts
- Weight:19.50kg
- Dimensions (H x W x D): 985.0" x 7-1/8" x 14-1/4"( 985.0 x 180.0 x 362.0mm )
Polk XT70 Key Specs
- 2-way Design
- 1" dome Tweeter
- 2 x 6.5" Bi-laminate paper Woofer
- 35-40k Hz Frequency Response
- 86 dB Sensitivity
- Impedance: 8ohms
- Power Range:25-200watts
- Weight:15.91kg
- Dimensions (H x W x D): 1031.0" x 10-13/16" x 13-3/8"( 1031.0 x 275.0 x 340.0mm )
What size room are the Wharfedale Diamond 12.3 and Polk XT70 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Wharfedale Diamond 12.3 |
Polk XT70 |
| Near-field |
Bad |
Bad |
| Small Room |
Poor |
Poor |
| Mid-size Room |
Good |
Good |
| Large Room |
Good |
Good |
| Very Large Room |
Poor |
Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the Wharfedale Diamond 12.3 and Polk XT70 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Diamond 12.3 and XT70 are 2-way speakers.
| Driver |
Wharfedale Diamond 12.3 |
Polk XT70 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
2 x 5-inch
|
2 x 6.5-inch
|
Diamond 12.3 features a 1" Textile Soft-Dome Tweeter and 2 x 5" Mica-infused polypropylene Woofer with a Crossover frequency at 2200Hz. On the other hand, the XT70 features a 1" Terylene dome Tweeter and 2 x 6.5" Bi-laminate paper Woofer .
Frequency Response
Diamond 12.3 has a frequency range of 45-20k Hz whereas XT70 has a frequency range of 35-40k Hz. With a minimum frequency of 35Hz, the XT70 can go significantly deeper on the low side and provide stronger bass compared to the Diamond 12.3's min frequency of 45Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Diamond 12.3 and XT70 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. Diamond 12.3 sensitivity is rated at 88 dB and the XT70's is at 86 dB. This 2 dB difference makes the Wharfedale Diamond 12.3 a more sensitive speaker compared to Polk XT70, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
Diamond 12.3 can handle a max power of 200 watts RMS from the amp the whereas Diamond 12.3 has a max power handling value of 150 watts RMS , 50 watts less than the XT70.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Diamond 12.3 features Binding post posts which make bi-amping or bi-wiring possible. XT70 has a 5-Way post which doesn't feature bi-amping/bi-wiring.
Wharfedale Diamond 12.3's Binding post terminals allows Bi-amping or bi-wiring
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Wharfedale Diamond 12.3's and Polk XT70's external dimensions. Wharfedale Diamond 12.3 has external dimensions of 985.0 x 180.0 x 362.0mm ( 38-3/4 x 7-1/8 x 14-1/4inch) whereas Polk XT70 has external dimensions of 1031.0 x 275.0 x 340.0mm ( 40-9/16 x 10-13/16 x 13-3/8inch) .
Wharfedale Diamond 12.3 is 95mm narrower and 46mm shorter than Polk XT70 but it is also 22mm deeper.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Wharfedale Diamond 12.3 is approximately 651.6cm2 / 101.0inch2 and base area of the Polk XT70 is approximately 935.0cm2 / 144.9inch2. The Diamond 12.3 requires 30% less surface area than the XT70 which gives it a small advantage on placement in tight spaces.