In this review, we will be comparing Diamond 12.0 and RP-600M, two Passive Bookshelf speakers from Wharfedale and Klipsch. Let's have a brief look at the main features
of Wharfedale 12.0 and Klipsch RP-600M first before getting into our more
detailed comparison.
What size room are the Wharfedale 12.0 and Klipsch RP-600M speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Wharfedale 12.0 and Klipsch RP-600M compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Diamond 12.0 and RP-600M are 2-way speakers.
| Driver |
Wharfedale 12.0 |
Klipsch RP-600M |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 4-inch
|
1 x 6.5-inch
|
Diamond 12.0 features a 1" Textile Soft-Dome Tweeter and 1 x 4" Mica-infused polypropylene Woofer with a Crossover frequency at 2700Hz. On the other hand, the RP-600M features a 1" Tractrix Horn Tweeter and 1 x 6.5" Cerametallic Woofer with a Crossover frequency at 1500Hz.
Frequency Response
Diamond 12.0 has a frequency range of 70-20k Hz whereas RP-600M has a frequency range of 45-25k Hz. With a minimum frequency of 45Hz, the RP-600M can go significantly deeper on the low side and provide stronger bass compared to the Diamond 12.0's min frequency of 70Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Diamond 12.0 and RP-600M have the same Impedance of 8 ohms but where they differ is the sensitivity levels. Diamond 12.0 sensitivity is rated at 87 dB and the RP-600M's is at 96 dB. This 9 dB difference makes the Klipsch RP-600M a more sensitive speaker compared to Wharfedale 12.0, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Diamond 12.0 can handle a max power of 100 watts RMS from the amp the whereas Diamond 12.0 has a max power handling value of 60 watts RMS , 40 watts less than the RP-600M.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Both Diamond 12.0 and RP-600M features dual binding post speaker terminals for bi-amping or bi-wiring.
Klipsch RP-600M's Dual binding posts/bi-wire/bi-amp terminals allows Bi-amping or bi-wiring
Cabinet Type and Port Position
Both Diamond 12.0 and RP-600M have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Klipsch RP-600M Tractrix horn-shaped Port
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Wharfedale 12.0's and Klipsch RP-600M's external dimensions. Wharfedale 12.0 has external dimensions of 265.0 x 160.0 x 228.0mm ( 10.4 x 6.2 x 8.9inch) whereas Klipsch RP-600M has external dimensions of 399.0 x 202.0 x 301.0mm ( 15.7 x 7.9 x 11.8inch) .
Klipsch RP-600M is clearly the larger of the two speakers. Its body is 42mm wider, 134mm taller and 73mm deeper than Wharfedale 12.0.
Below you can see the front view size comparison of Wharfedale 12.0 and Klipsch RP-600M in scale.
Comparison image of Wharfedale 12.0 and Klipsch RP-600M Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Wharfedale 12.0 is approximately 364.8cm2 / 56.5inch2 and base area of the Klipsch RP-600M is approximately 608.0cm2 / 94.2inch2. The Diamond 12.0 requires 40% less surface area than the RP-600M which gives it a small advantage on placement in tight spaces.
Here is an another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:
Size Comparison image of Wharfedale 12.0 and Klipsch RP-600M on a Media Console
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Wharfedale 12.0 weighs 5.10kg / 11.2lbs and the Klipsch RP-600M weighs 7.30kg / 16.1lbs. This makes the RP-600M 43% heavier than the Diamond 12.0.
Here is a comparison of how Diamond 12.0 and RP-600M's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Wharfedale 12.0?
Here are the items that are included inside the box of Diamond 12.0:
2 Bookshelf loudspeakers2 Grilles4 Jumper-bars (pre-installed)8 Self-adhesive rubber feetUser-feets Manual
What's in the Box of Klipsch RP-600M?
Here are the items that come with the RP-600M:
2 Bookshelf loudspeakers2 Grilles (installed)8 Self-adhesive rubber feet4 Terminal jumpers (installed)User ManualImportant Safety InstructionsWarranty Information
 Height |
265mm
vs
399mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
364cm2 (160x228mm)
vs
608cm2 (202x301mm)
|
Takes less floor space |
 Price per pair* |
349USD
vs
369USD
|
costs less (*prices may change depending on the seller, location and time) |
 Max Input Power |
100 watts
vs
60 watts
|
Handle more power from your amplifier |
 Sensitivity |
96 dB
vs
87 dB
|
Play louder with same amount of amplification power |
 Woofer Size |
6.5 inches
vs
4 inches
|
Larger woofer |
| Low Frequency Response |
45 Hz
vs
70 Hz
|
Generates deeper bass |
 High Frequency Response |
25k Hz
vs
20k Hz
|
Generates higher frequency |
| General |
Wharfedale Diamond 12.0 |
Klipsch Reference Premiere RP-600M |
| Brand |
Wharfedale |
Klipsch |
| Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
| Power Range |
20-60 watts |
up to 100 watts |
| Sensitivity |
87 dB |
96 dB |
| Impedance |
8 ohms |
8 ohms |
| Impedance |
4 ohms |
n/a |
| Frequency Response |
70-20k Hz |
45-25k Hz |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
4" |
6.5" |
| Woofer Composition |
Mica-infused polypropylene |
Cerametallic |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
Soft-Dome |
Tractrix Horn |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
2700Hz |
1500Hz |
| Firing Direction |
rear |
rear |
Physical Specs |
|
|
| Height |
265.0mm (10.4") |
399.0mm (15.7") |
| Width |
160.0mm (6.3") |
202.0mm (8") |
| Depth |
228.0mm (9") |
301.0mm (11.9") |
| Weight |
5.10kg (11.2lbs) |
7.30kg (16.1lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
MDF/Wood veneer |
MDF/Wood-grain vinyl |
| Available Colors |
Walnut,Black,Oak,White |
Ebony, Walnut, Piano Black |
| Mounting Bracket |
No |
No |
| Recommended Stand Height |
24-28" |
22-26" |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
Yes |
Yes |
Other |
|
|
| Parts Warranty |
5 years |
5 Years |
| Labor Warranty |
5 years |
5 Years |