In this review, we will be comparing Diamond 11.0 and BW 607, two Passive Bookshelf speakers from Wharfedale and Bowers Wilkins. Let's have a brief look at the main features
of Wharfedale 11.0 and B&W 607 first before getting into our more
detailed comparison.
What size room are the Wharfedale 11.0 and B&W 607 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Wharfedale 11.0 and B&W 607 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Diamond 11.0 and BW 607 are 2-way speakers.
Driver |
Wharfedale 11.0 |
B&W 607 |
Driver Setup
|
2-way
|
2-way
|
Tweeter
|
1-inch
|
1-inch
|
Midrange
|
- |
- |
Woofer
|
1 x 4-inch
|
1 x 5-inch
|
Diamond 11.0 features a 1" Soft-Dome Tweeter and 1 x 4" Woven Kevlar Woofer . On the other hand, the BW 607 features a 1" Decoupled Carbon Hard-Dome Tweeter and 1 x 5" Continuum Woofer .
Frequency Response
Diamond 11.0 has a frequency range of 75-20k Hz whereas BW 607 has a frequency range of 52-28k Hz. With a minimum frequency of 52Hz, the BW 607 can go significantly deeper on the low side and provide stronger bass compared to the Diamond 11.0's min frequency of 75Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Diamond 11.0 and BW 607 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. Diamond 11.0 sensitivity is rated at 85 dB and the BW 607's is at 84 dB. This 1 dB difference makes the Wharfedale 11.0 a more sensitive speaker compared to B&W 607, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Diamond 11.0 can handle a max power of 100 watts RMS from the amp the whereas Diamond 11.0 has a max power handling value of 75 watts RMS , 25 watts less than the BW 607.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
BW 607 features Post posts which make bi-amping or bi-wiring possible. Diamond 11.0 has a 5-way post which doesn't feature bi-amping/bi-wiring.
Cabinet Type and Port Position
Diamond 11.0 has a bottom firing port whereas BW 607 has a rear firing ports. Wharfedale 11.0's bottom-firing port gives more flexibility in placement in regards to proximity to walls compared to B&W 607 with its rear-firing port.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Wharfedale 11.0's and B&W 607's external dimensions. Wharfedale 11.0 has external dimensions of 256.0 x 158.0 x 181.0mm ( 10-1/16 x 6-3/16 x 7-1/8inch) whereas B&W 607 has external dimensions of 300.0 x 165.0 x 207.0mm ( 11.8 x 6.4 x 8.1inch) .
B&W 607 is clearly the larger of the two speakers. Its body is 7mm wider, 44mm taller and 26mm deeper than Wharfedale 11.0.
Below you can see the front view size comparison of Wharfedale 11.0 and B&W 607 in scale.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Wharfedale 11.0 is approximately 286.0cm2 / 44.3inch2 and base area of the B&W 607 is approximately 341.6cm2 / 52.9inch2. The Diamond 11.0 requires 16% less surface area than the BW 607 which gives it a small advantage on placement in tight spaces.
Here is an another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Wharfedale 11.0 weighs 3.09kg / 6.8lbs and the B&W 607 weighs 4.70kg / 10.3lbs. This makes the BW 607 52% heavier than the Diamond 11.0.
Here is a comparison of how Diamond 11.0 and BW 607's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Wharfedale 11.0?
Here are the items that are included inside the box of Diamond 11.0:
2 Bookshelf loudspeakers2 Grilles (pre-installed)User-feets ManualInstallation Guide
What's in the Box of B&W 607?
Here are the items that come with the BW 607:
2 Bookshelf loudspeakers2 Grilles2 Two-piece foam port plugs8 Self-adhesive rubber feet4 Jumper-straps Manual Bowers & Wilkins brochureWarranty Information
Sensitivity |
85 dB
vs
84 dB
|
Play louder with same amount of amplification power |
Height |
256mm
vs
300mm
|
Easier to fit in smaller spaces |
Base Surface Area |
286cm2 (158x181mm)
vs
341cm2 (165x207mm)
|
Takes less floor space |
Max Input Power |
100 watts
vs
75 watts
|
Handle more power from your amplifier |
Woofer Size |
5 inches
vs
4 inches
|
Larger woofer |
Low Frequency Response |
52 Hz
vs
75 Hz
|
Generates deeper bass |
High Frequency Response |
28k Hz
vs
20k Hz
|
Generates higher frequency |
Bi-Amping and Bi-Wiring |
Yes
vs
No
|
Allows bi-amping and bi-wiring connections |
General |
Wharfedale Diamond 11.0 |
Bowers & Wilkins 607 |
Brand |
Wharfedale |
Bowers Wilkins |
Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
Power Range |
15-75 watts |
30-100 watts |
Sensitivity |
85 dB |
84 dB |
Impedance |
8 ohms |
8 ohms |
Impedance |
n/a |
3.0 ohms |
Frequency Response |
75-20k Hz |
52-28k Hz |
Drivers |
|
|
Woofer Quantity |
1 |
1 |
Woofer Size |
4" |
5" |
Woofer Composition |
Woven Kevlar |
Continuum |
Woofer Surround Material |
Foam |
Rubber |
Tweeter Size |
1" |
1" |
Tweeter Type |
Soft-Dome |
Hard-Dome |
Aimable Tweeter |
No |
No |
Midrange Driver |
No |
No |
Firing Direction |
bottom |
rear |
Physical Specs |
|
|
Height |
256.0mm (10.1") |
300.0mm (11.8") |
Width |
158.0mm (6.2") |
165.0mm (6.5") |
Depth |
181.0mm (7.1") |
207.0mm (8.1") |
Weight |
3.09kg (6.8lbs) |
4.70kg (10.3lbs) |
Enclosure |
Bass Reflex |
Bass Reflex |
Finish |
MDF/Wood veneer |
MDF/Vinyl |
Available Colors |
Rosewood |
Black, White, Oak |
Mounting Bracket |
No |
No |
Recommended Stand Height |
24-28" |
24-26" |
Grille |
Yes |
Yes |
Moisture Resistancy |
No |
No |
Connections |
|
|
Biamp Inputs |
No |
Yes |
Other |
|
|
Parts Warranty |
5 Years |
5 Years |
Labor Warranty |
5 Years |
5 Years |