In this review, we will be comparing Crystal 4.2 and L100, two Passive Bookshelf speakers from Wharfedale and Polk Audio. Let's have a brief look at the main features
of Wharfedale Crystal 4.2 and Polk L100 first before getting into our more
detailed comparison.
What size room are the Wharfedale Crystal 4.2 and Polk L100 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Wharfedale Crystal 4.2 and Polk L100 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Crystal 4.2 and L100 are 2-way speakers.
Driver |
Wharfedale Crystal 4.2 |
Polk L100 |
Driver Setup
|
2-way
|
2-way
|
Tweeter
|
1-inch
|
1-inch
|
Midrange
|
- |
- |
Woofer
|
1 x 5-inch
|
1 x 5.25-inch
|
Crystal 4.2 features a 1" Soft-dome Tweeter and 1 x 5" Woven Kevlar Woofer . On the other hand, the L100 features a 1" Ring Radiator Tweeter and 1 x 5.25" Polypropylene Woofer with a Crossover frequency at 2900Hz.
Frequency Response
Crystal 4.2 has a frequency range of 60-20k Hz whereas L100 has a frequency range of 57-38k Hz. With a minimum frequency of 57Hz, the L100 can go slightly deeper then the Crystal 4.2's min frequency of 60Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Crystal 4.2 is a 8 ohms speaker compared to the L100 which has a nominal impedance of 4 ohms. Lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit especially when played at high volume levels, so make sure the amp you pair with the L100 can provide this impedance level.
These two speakers also have different sensitivity levels. Crystal 4.2 sensitivity is rated at 88 dB and the L100's is rated at 85.5 dB. This 2 dB difference makes the Wharfedale Crystal 4.2 a more sensitive speaker compared to Polk L100, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Crystal 4.2 can handle a max power of 160 watts RMS from the amp the whereas Crystal 4.2 has a max power handling value of 100 watts RMS , 60 watts less than the L100.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Crystal 4.2 features Post type posts and L100 has a Post type posts. None of these speakers feature bi-amping/bi-wiring.
Cabinet Type and Port Position
Both Crystal 4.2 and L100 have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Wharfedale Crystal 4.2's and Polk L100's external dimensions. Wharfedale Crystal 4.2 has external dimensions of 266.0 x 181.0 x 220.0mm ( 10-7/16 x 7-1/8 x 8-5/8inch) whereas Polk L100 has external dimensions of 348.0 x 201.0 x 288.0mm ( 13-11/16 x 7-7/8 x 11-5/16inch) .
Polk L100 is clearly the larger of the two speakers. Its body is 20mm wider, 82mm taller and 68mm deeper than Wharfedale Crystal 4.2.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Wharfedale Crystal 4.2 is approximately 398.2cm2 / 61.7inch2 and base area of the Polk L100 is approximately 578.9cm2 / 89.7inch2. The Crystal 4.2 requires 31% less surface area than the L100 which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Wharfedale Crystal 4.2 weighs 4.20kg / 9.2lbs and the Polk L100 weighs 7.68kg / 16.9lbs. This makes the L100 83% heavier than the Crystal 4.2.
Here is a comparison of how Crystal 4.2 and L100's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Wharfedale Crystal 4.2?
Here are the items that are included inside the box of Crystal 4.2:
2 Bookshelf loudspeakers2 Grilles (pre-installed)User-feets ManualInstallation Guide
What's in the Box of Polk L100?
Here are the items that come with the L100:
2 Bookshelf loudspeakers 2 Grilles Cleaning cloth Owners Manual Online Registration
Sensitivity |
88 dB
vs
86 dB
|
Play louder with same amount of amplification power |
Nominal Impedance |
8 ohms
vs
4 ohms
|
Less selective with amplifiers |
Height |
266mm
vs
348mm
|
Easier to fit in smaller spaces |
Base Surface Area |
398cm2 (181x220mm)
vs
578cm2 (201x288mm)
|
Takes less floor space |
Max Input Power |
160 watts
vs
100 watts
|
Handle more power from your amplifier |
Woofer Size |
5.25 inches
vs
5 inches
|
Larger woofer |
Low Frequency Response |
57 Hz
vs
60 Hz
|
Generates deeper bass |
High Frequency Response |
38k Hz
vs
20k Hz
|
Generates higher frequency |
General |
Wharfedale Crystal 4.2 |
Polk Audio Legend L100 |
Brand |
Wharfedale |
Polk Audio |
Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
Power Range |
20-100 watts |
30-160 watts |
Sensitivity |
88 dB |
85.5 dB |
Impedance |
8 ohms |
4 ohms |
Impedance |
n/a |
3 ohms |
Frequency Response |
60-20k Hz |
57-38k Hz |
Drivers |
|
|
Woofer Quantity |
1 |
1 |
Woofer Size |
5" |
5.25" |
Woofer Composition |
Woven Kevlar |
Polypropylene |
Woofer Surround Material |
Rubber |
Rubber |
Tweeter Size |
1" |
1" |
Tweeter Type |
Soft-dome |
Ring Radiator |
Aimable Tweeter |
No |
No |
Midrange Driver |
No |
No |
Crossover Frequency |
n/a |
2900Hz |
Firing Direction |
rear |
rear |
Physical Specs |
|
|
Height |
266.0mm (10.5") |
348.0mm (13.7") |
Width |
181.0mm (7.1") |
201.0mm (7.9") |
Depth |
220.0mm (8.7") |
288.0mm (11.3") |
Weight |
4.20kg (9.2lbs) |
7.68kg (16.9lbs) |
Enclosure |
Bass reflex |
Bass Reflex |
Finish |
Wood-grain vinyl |
MDF/Wood veneer |
Available Colors |
Walnut |
Brown Walnut, Black Ash |
Mounting Bracket |
No |
No |
Recommended Stand Height |
24-28" |
24-28" |
Grille |
Yes |
Yes |
Moisture Resistancy |
No |
No |
Connections |
|
|
Biamp Inputs |
No |
No |
Other |
|
|
Parts Warranty |
5 Years |
5 Years |
Labor Warranty |
5 Years |
5 Years |