In this review, we will be comparing AURA 1 and R3, two Passive Bookshelf speakers from Wharfedale and KEF. Let's have a brief look at the main features
of Wharfedale AURA 1 and KEF R3 first before getting into our more
detailed comparison.
Wharfedale AURA 1 Key Specs
- 2-way Design
- 1.0625 x 3.5" AMT (Ribbon) Tweeter
- 5" Glass Fiber Matrix Woofer
- 48-22k Hz Frequency Response
- 86 dB Sensitivity
- Impedance: 6ohms
- Power Range:25-100watts
- Weight:12.50kg
- Dimensions (H x W x D): 367.0" x 9-3/4" x 13-3/4"( 367.0 x 248.0 x 350.0mm )
KEF R3 Key Specs
- 3-way Design
- 1" Dome Tweeter
- 5" Midrange
- 6.5" Hybrid aluminum Woofer
- 5" Midrange
- 52-28k Hz Frequency Response
- 87 dB Sensitivity
- Impedance: 8ohms
- Power Range:15-180watts
- Weight:13.55kg
- Dimensions (H x W x D): 423.0" x 7-13/16" x 13-1/4"( 423.0 x 199.0 x 337.0mm )
What size room are the Wharfedale AURA 1 and KEF R3 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
Listening Environment* |
Wharfedale AURA 1 |
KEF R3 |
Near-field |
Average |
Poor |
Small Room |
Good |
Average |
Mid-size Room |
Average |
Good |
Large Room |
Poor |
Average |
Very Large Room |
Bad |
Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the Wharfedale AURA 1 and KEF R3 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
One of the fundamental differences between these two speakers is that AURA 1 is a 2-way design whereas the R3 is a 3-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
Driver |
Wharfedale AURA 1 |
KEF R3 |
Driver Setup
|
2-way
|
3-way
|
Tweeter
|
1.0625 x 3.5-inch
|
1-inch
|
Midrange
|
- |
1 x 5-inch |
Woofer
|
1 x 5-inch
|
1 x 6.5-inch
|
AURA 1 features a 1.0625 x 3.5" AMT (Ribbon) Tweeter and 1 x 5" Glass Fiber Matrix Woofer with a Crossover frequency at 2.9kHz. On the other hand, the R3 features a 1" aluminum Dome Tweeter , a 5" Midrange and 1 x 6.5" Hybrid aluminum Woofer with a Crossover frequency at 400Hz and 2900Hz.
Frequency Response
AURA 1 has a frequency range of 48-22k Hz whereas R3 has a frequency range of 52-28k Hz. With a minimum frequency of 48Hz, the AURA 1 can go slightly deeper then the R3's min frequency of 52Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
AURA 1 is a 6 ohms speaker compared to the R3 which has a nominal impedance of 8 ohms.
These two speakers also have different sensitivity levels. AURA 1 sensitivity is rated at 86 dB and the R3's is rated at 87 dB. This 1 dB difference makes the KEF R3 a more sensitive speaker compared to Wharfedale AURA 1, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
AURA 1 can handle a max power of 180 watts RMS from the amp the whereas AURA 1 has a max power handling value of 100 watts RMS , 80 watts less than the R3.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Both AURA 1 and R3 features dual binding post speaker terminals for bi-amping or bi-wiring.
Wharfedale AURA 1's Binding post terminals allows Bi-amping or bi-wiring
Cabinet Type and Port Position
AURA 1 has a bottom firing port whereas R3 has a rear firing ports. Wharfedale AURA 1's bottom-firing port gives more flexibility in placement in regards to proximity to walls compared to KEF R3 with its rear-firing port.
KEF R3 Port
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Wharfedale AURA 1's and KEF R3's external dimensions. Wharfedale AURA 1 has external dimensions of 367.0 x 248.0 x 350.0mm ( 14-7/16inch x 9-3/4inch x 13-3/4inch ) whereas KEF R3 has external dimensions of 423.0 x 199.0 x 337.0mm ( 16-5/8 x 7-13/16 x 13-1/4inch) .
KEF R3 is 49mm narrower and 13mm less deeper than Wharfedale AURA 1 but it is also 56mm taller.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Wharfedale AURA 1 is approximately 868.0cm2 / 134.5inch2 and base area of the KEF R3 is approximately 670.6cm2 / 103.9inch2. The AURA 1 requires 29% more surface area than the R3 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Wharfedale AURA 1 weighs 12.50kg / 27.5lbs and the KEF R3 weighs 13.55kg / 29.8lbs. This makes the R3 8% heavier than the AURA 1.
Here is a comparison of how AURA 1 and R3's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Wharfedale AURA 1?
Here are the items that are included inside the box of AURA 1:
2 Bookshelf loudspeakers2 Grilles4 Jumper wires8 Rubber feetPair of white glovesUser Manual
What's in the Box of KEF R3?
Here are the items that come with the R3:
2 Bookshelf loudspeakers2 Grilles2 Foam port plugs8 Self-adhesive rubber feetUser ManualWarranty Information