In this review, we will be comparing Borea BR02 BT and Mackie CR4-XBT, two Powered Bookshelf speakers from Triangle and Mackie. Being Powered speakers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them.
Let's have a brief look at the main features
of Triangle Borea BR02 BT and Mackie CR4-XBT first before getting into our more
detailed comparison.
Triangle Borea BR02 BT Key Specs
- 2-way Design
- 120-watt RMS Integrated Amplifier
- 1" Dome Tweeter
- 6.5" fiberglass Woofer
- 47-22kHz Frequency Response
- 90dB Sensitivity
- Impedance: 8ohms
- 24-bit Max Depth / 48 kHz Max Sample Rate
- Built-in 5.0 Bluetooth
- Weight:14.20kg
- Dimensions (H x W x D): 360.0" x 8.1" x 12.36"( 206 x 360 x 314 mm )
Mackie CR4-XBT Key Specs
- 2-way Design
- 25-watt RMS( 50-watt Peak) Integrated Amplifier
- 0.75" Dome Tweeter
- 4" Polypropylene Woofer
- 65-20k Hz Frequency Response
- N/A Max Depth / N/A Max Sample Rate
- Built-in 4.2 Bluetooth
- Dimensions (H x W x D): 222.3" x 6.125" x 8.5"( 222.3 x 155.6 x 215.9mm )
In the following sections, we will get into more detail in order to better understand how the Triangle Borea BR02 BT and Mackie CR4-XBT compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Borea BR02 BT and Mackie CR4-XBT are 2-way speakers.
| Driver |
Triangle Borea BR02 BT |
Mackie CR4-XBT |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
0.75-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 6.5-inch
|
1 x 4-inch
|
Borea BR02 BT features a 1" EFS fabric Dome Tweeter and 1 x 6.5" fiberglass Woofer . On the other hand, the Mackie CR4-XBT features a 0.75" Silk Dome Tweeter and 1 x 4" Polypropylene Woofer .
Frequency Response
Borea BR02 BT has a frequency range of 47-22kHz whereas Mackie CR4-XBT has a frequency range of 65-20k Hz. With a minimum frequency of 47Hz, the Borea BR02 BT can go significantly deeper on the low side and provide stronger bass compared to the Mackie CR4-XBT's min frequency of 65Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Cabinet Type and Port Position
Both Borea BR02 BT and Mackie CR4-XBT have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Triangle Borea BR02 BT's and Mackie CR4-XBT's external dimensions. Triangle Borea BR02 BT has external dimensions of 206 x 360 x 314 mm ( 8.1x 14.1 x 12.36 inches) whereas Mackie CR4-XBT has external dimensions of 222.3 x 155.6 x 215.9mm ( 8.75 x 6.125 x 8.5inch) .
Triangle Borea BR02 BT is clearly the larger of the two speakers. Its body is 50.4mm wider, 137.7mm taller and 98.1mm deeper than Mackie CR4-XBT.
Below you can see the front view size comparison of Triangle Borea BR02 BT and Mackie CR4-XBT in scale.
Comparison image of Triangle Borea BR02 BT and Mackie CR4-XBT Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Triangle Borea BR02 BT is approximately 646.0cm2 / 100.1inch2 and base area of the Mackie CR4-XBT is approximately 335.9cm2 / 52.1inch2. The Borea BR02 BT requires 92% more surface area than the Mackie CR4-XBT which gives it a small disadvantage on placement in tight spaces.
Here is an another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:
Size Comparison image of Triangle Borea BR02 BT and Mackie CR4-XBT on a Media Console
What's in the Box of Triangle Borea BR02 BT?
Here are the items that are included inside the box of Borea BR02 BT:
1 x passive loudspeaker BOREA BT cable to link the loudspeakers 8. 1 x user manual1 x active loudspeaker BOREA BT (indicator light on the front) 2 x protection grills 1 x remote control, incl. 2 AAA batteries 8 x adhesive anti-slip feet to place below the speakers 1 x AC power cord 1 x 3 meters speaker
What's in the Box of Mackie CR4-XBT?
Here are the items that come with the Mackie CR4-XBT:
Powered monitor w/ attached 5.5-feet power cord (C7 unpolarized)Passive monitor6.5-feet Speaker wire5-feet Stereo mini to RCA cableQuick Start Guide