In this review, we will be comparing Sony Signature Series SA-Z1 and YU6, two Powered Bookshelf speakers from Sony and Kanto. Being Powered speakers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features
of Sony Signature Series SA-Z1 and Kanto YU6 first before getting into our more
detailed comparison.
In the following sections, we will get into more detail in order to better understand how the Sony Signature Series SA-Z1 and Kanto YU6 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Sony Signature Series SA-Z1 and YU6 are 2-way speakers.
Driver |
Sony Signature Series SA-Z1 |
Kanto YU6 |
Driver Setup
|
2-way
|
2-way
|
Tweeter
|
0.75, 0.5 (2)-inch
|
1-inch
|
Midrange
|
- |
- |
Woofer
|
2 x 4-inch
|
1 x 5.25-inch
|
Sony Signature Series SA-Z1 features a 0.75, 0.5 (2)" Titanium Hard-Dome Tweeter and 2 x 4" Woofer . On the other hand, the YU6 features a 1" Silk Soft-Dome Tweeter and 1 x 5.25" Kevlar Woofer .
Frequency Response
Sony Signature Series SA-Z1 has a frequency range of 51-100k Hz whereas YU6 has a frequency range of 50-20k Hz. With a minimum frequency of 50Hz, the YU6 can go slightly deeper then the Sony Signature Series SA-Z1's min frequency of 51Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
Sony Signature Series SA-Z1
High Frequency
Bookshelf Speakers
Sony Signature Series SA-Z1
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Sony Signature Series SA-Z1's and Kanto YU6's external dimensions. Sony Signature Series SA-Z1 has external dimensions of 209.5 x 200.0 x 327.0mm ( 8.25 x 7.875 x 12.875inch) whereas Kanto YU6 has external dimensions of 272.0 x 175.0 x 205.0mm ( 10.7 x 6.9 x 8.1inch) .
Kanto YU6 is 25mm narrower and 122mm less deeper than Sony Signature Series SA-Z1 but it is also 62.5mm taller.
Below you can see the front view size comparison of Sony Signature Series SA-Z1 and Kanto YU6 in scale.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Sony Signature Series SA-Z1 is approximately 654.0cm2 / 101.4inch2 and base area of the Kanto YU6 is approximately 358.8cm2 / 55.6inch2. The Sony Signature Series SA-Z1 requires 82% more surface area than the YU6 which gives it a small disadvantage on placement in tight spaces.
Here is an another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:
What's in the Box of Sony Signature Series SA-Z1?
Here are the items that are included inside the box of Sony Signature Series SA-Z1:
2 Desktop monitor speakers2 AC power cordsDigital sync cableWalkman cableUSB-C to USB-B cableRemote control2 AAA batteriesInstruction Manual
What's in the Box of Kanto YU6?
Here are the items that come with the YU6:
Remote with Batteries Power Cord Speaker Wire (16′) 3.5mm Auxiliary Cable (6.5′) 8 x Rubber Feet Manual