In this review, we will be comparing PerformaBe F228Be and 702 S2, two Passive Floor-standing speakers from Revel and Bowers Wilkins. Let's have a brief look at the main features
of Revel PerformaBe F228Be and B&W 702 S2 first before getting into our more
detailed comparison.
What size room are the Revel PerformaBe F228Be and B&W 702 S2 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Revel PerformaBe F228Be and B&W 702 S2 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both PerformaBe F228Be and 702 S2 are 3-way speakers.
Driver |
Revel PerformaBe F228Be |
B&W 702 S2 |
Driver Setup
|
3-way
|
3-way
|
Tweeter
|
1-inch
|
1-inch
|
Midrange
|
1 x 5.25-inch |
1 x 6-inch |
Woofer
|
2 x 8-inch
|
3 x 6.5-inch
|
PerformaBe F228Be features a 1" beryllium dome with proprietary acoustic lens waveguide Tweeter , a 5.25" Midrange and 2 x 8" DCC Aluminum Woofer . On the other hand, the 702 S2 features a 1" Tweeter , a 6" Midrange and 3 x 6.5" Aerofoil Woofer .
Frequency Response
PerformaBe F228Be has a frequency range of 27-44k Hz whereas 702 S2 has a frequency range of 46-28k Hz. With a minimum frequency of 27Hz, the PerformaBe F228Be can go significantly deeper on the low side and provide stronger bass compared to the 702 S2's min frequency of 46Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
PerformaBe F228Be and 702 S2 have the same Impedance of 8 ohms and their sensitivity is also same at 90 dB.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
PerformaBe F228Be can handle a max power of 350 watts RMS from the amp the whereas 702 S2 has a max power handling value of 300 watts RMS, 50 watts less than the PerformaBe F228Be.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Both PerformaBe F228Be and 702 S2 features dual binding post speaker terminals for bi-amping or bi-wiring.
Cabinet Type and Port Position
PerformaBe F228Be has a front firing port whereas 702 S2 has a rear firing ports. Revel PerformaBe F228Be's front-firing port gives more flexibility in placement in regards to proximity to walls compared to B&W 702 S2 with its rear-firing port.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Revel PerformaBe F228Be's and B&W 702 S2's external dimensions. Revel PerformaBe F228Be has external dimensions of 1182.0 x 301.0 x 337.0mm ( 46-1/2 x 11-13/16 x 13-1/4inch) whereas B&W 702 S2 has external dimensions of 1087.0 x 200.0 x 364.0mm ( 42.8-inch x 14-7/16-inch x 14.3-inch) .
B&W 702 S2 is 101mm narrower and 95mm shorter than Revel PerformaBe F228Be but it is also 27mm deeper.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Revel PerformaBe F228Be is approximately 1014.4cm2 / 157.2inch2 and base area of the B&W 702 S2 is approximately 728.0cm2 / 112.8inch2. The PerformaBe F228Be requires 39% more surface area than the 702 S2 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Revel PerformaBe F228Be weighs 37.27kg / 82lbs and the B&W 702 S2 weighs 29.50kg / 64.9lbs. This makes the PerformaBe F228Be 26% heavier than the 702 S2.
Here is a comparison of how PerformaBe F228Be and 702 S2's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
What's in the Box of Revel PerformaBe F228Be?
Here are the items that are included inside the box of PerformaBe F228Be:
Floorstanding loudspeakerGrille4 Spike feet4 Locking rings4 Washers2 Terminal jumpers (pre-installed)Foam port plugOwners Manual
What's in the Box of B&W 702 S2?
Here are the items that come with the 702 S2:
Floorstanding loudspeakerGrillePlinth (base)2 Jumper-straps (pre-installed)Two-piece foam port plug4 Rubber feet4 Spike feet4 Lock-nuts4 Screws4 Washers4 Lock washersHex-keyManualBowers & Wilkins brochureWarranty Information
Max Input Power |
350 watts
vs
300 watts
|
Handle more power from your amplifier |
Woofer Size |
8 inches
vs
6.5 inches
|
Larger woofer |
Low Frequency Response |
27 Hz
vs
46 Hz
|
Generates deeper bass |
High Frequency Response |
44k Hz
vs
28k Hz
|
Generates higher frequency |
Port Position |
Front
vs
Rear
|
Gives more flexibility placing close to walls |
Number of Woofers |
3
vs
2
|
More woofers |
Height |
1087mm
vs
1182mm
|
Easier to fit in smaller spaces |
Base Surface Area |
728cm2 (200x364mm)
vs
1014cm2 (301x337mm)
|
Takes less floor space |
Price per pair* |
6000USD
vs
11000USD
|
costs less (*prices may change depending on the seller, location and time) |
General |
Revel PerformaBe F228Be |
Bowers & Wilkins 702 S2 |
Brand |
Revel |
Bowers Wilkins |
Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
Power Range |
50-350 watts |
30-300 watts |
Sensitivity |
90 dB |
90 dB |
Impedance |
8 ohms |
8 ohms |
Impedance |
n/a |
3.1 ohms |
Frequency Response |
27-44k Hz |
46-28k Hz |
Drivers |
|
|
Woofer Quantity |
2 |
3 |
Woofer Size |
8" |
6.5" |
Woofer Composition |
DCC Aluminum |
Aerofoil |
Woofer Surround Material |
Rubber |
Rubber |
Tweeter Size |
1" |
1" |
Tweeter Type |
dome with proprietary acoustic lens waveguide |
n/a |
Aimable Tweeter |
No |
No |
Midrange Driver |
5.25" |
6" |
Firing Direction |
front |
rear |
Physical Specs |
|
|
Height |
1182.0mm (46.5") |
1087.0mm (42.8") |
Width |
301.0mm (11.9") |
200.0mm (7.9") |
Depth |
337.0mm (13.3") |
364.0mm (14.3") |
Weight |
37.27kg (82lbs) |
29.50kg (64.9lbs) |
Enclosure |
Bass Reflex |
Bass Reflex |
Finish |
Wood/Lacquer |
MDF/Lacquer |
Available Colors |
Gloss White |
Rosewood, Gloss Black, Satin White |
Grille |
Yes |
Yes |
Moisture Resistancy |
No |
No |
Connections |
|
|
Biamp Inputs |
Yes |
Yes |
Other |
|
|
Parts Warranty |
5 Years |
5 Years |
Labor Warranty |
5 Years |
5 Years |