In this review, we will be comparing Performa3 F208 and BP-9060, two Passive Floor-standing speakers from Revel and Definitive Technology.
Let's have a brief look at the main features
of Revel Performa3 F208 and Definitive BP-9060 first before getting into our more
detailed comparison.
Revel Performa3 F208 Key Specs
- 3-way Design
- 1" Hard-Dome with Acoustic Lens Waveguide Tweeter
- 5.25" Midrange
- 2 x 8" Aluminum Woofer
- 31Hz- 20kHz Frequency Response
- 88.5 dB Sensitivity
- Impedance: 8ohms
- Power Range:50-350watts
- Weight:36.27kg
- Dimensions (H x W x D): 1188.0" x 13-5/8" x 15"( 1188.0 x 347.0 x 381.0mm )
Definitive BP-9060 Key Specs
- 3-way Design
- 1" dome Tweeter
- 4.5" Midrange
- 10" Polypropelene Woofer
- 4.5" Midrange
- 18-49k Hz Frequency Response
- 92 dB Sensitivity
- Impedance: 8ohms
- Power Range:50-300watts
- Weight:22.73kg
- Dimensions (H x W x D): 1132.0" x 11-1/16" x 13-13/16"( 1132.0 x 281.0 x 351.0mm )
What size room are the Revel Performa3 F208 and Definitive BP-9060 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Revel Performa3 F208 |
Definitive BP-9060 |
| Near-field |
Are you nuts? |
Are you nuts? |
| Small Room |
Poor |
Poor |
| Mid-size Room |
Average |
Average |
| Large Room |
Good |
Good |
| Very Large Room |
Good |
Good |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the Revel Performa3 F208 and Definitive BP-9060 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Performa3 F208 and BP-9060 are 3-way speakers.
| Driver |
Revel Performa3 F208 |
Definitive BP-9060 |
|
Driver Setup
|
3-way
|
3-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
1 x 5.25-inch |
3 x 4.5-inch |
|
Woofer
|
2 x 8-inch
|
1 x 10-inch
|
Performa3 F208 features a 1" Aluminum Hard-Dome with Acoustic Lens Waveguide Tweeter , a 5.25" Midrange and 2 x 8" Aluminum Woofer with a Crossover frequency at 270Hz and 2200Hz. On the other hand, the BP-9060 features a 1" annealed aluminum dome Tweeter , a 4.5" Midrange and 1 x 10" Polypropelene Woofer .
Frequency Response
Performa3 F208 has a frequency range of 31Hz- 20kHz whereas BP-9060 has a frequency range of 18-49k Hz. With a minimum frequency of 18Hz, the BP-9060 can go significantly deeper on the low side and provide stronger bass compared to the Performa3 F208's min frequency of 31Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
Impedance and Sensitivity
Performa3 F208 and BP-9060 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. Performa3 F208 sensitivity is rated at 88.5 dB and the BP-9060's is at 92 dB. This 3 dB difference makes the Definitive BP-9060 a more sensitive speaker compared to Revel Performa3 F208, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
Performa3 F208 can handle a max power of 350 watts RMS from the amp the whereas BP-9060 has a max power handling value of 300 watts RMS, 50 watts less than the Performa3 F208.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Performa3 F208 features Binding post posts which make bi-amping or bi-wiring possible. BP-9060 has a 5-Way post, RCA which doesn't feature bi-amping/bi-wiring.
Revel Performa3 F208's Binding post terminals allows Bi-amping or bi-wiring
Definitive BP-9060's 5-Way post, RCA terminals
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Revel Performa3 F208's and Definitive BP-9060's external dimensions. Revel Performa3 F208 has external dimensions of 1188.0 x 347.0 x 381.0mm ( 46-3/4 x 13-5/8 x 15inch) whereas Definitive BP-9060 has external dimensions of 1132.0 x 281.0 x 351.0mm ( 44-9/16 x 11-1/16 x 13-13/16inch) .
Revel Performa3 F208 is clearly the larger of the two speakers. Its body is 66mm wider, 56mm taller and 30mm deeper than Definitive BP-9060.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Revel Performa3 F208 is approximately 1322.1cm2 / 204.9inch2 and base area of the Definitive BP-9060 is approximately 986.3cm2 / 152.9inch2. The Performa3 F208 requires 34% more surface area than the BP-9060 which gives it a small disadvantage on placement in tight spaces.