In this review, we will be comparing B28W and CS140, two Passive In-wall speakers from Revel and Monitor Audio.
Let's have a brief look at the main features
of Revel B28W and Monitor Audio CS140 first before getting into our more
detailed comparison.
Revel B28W Key Specs
- 1-way Design
- " Tweeter
- 2 x 8" Polymer-coated aluminum Woofer
- 36-150Hz Frequency Response
- 0 dB Sensitivity
- Impedance: 8ohms
- Power Range:350watts
- Dimensions (H x W x D): 597.0" x 14.5000" x 4.0000"( 597.0 x 369.0 x 102.0mm )
Monitor Audio CS140 Key Specs
- 2-way Design
- 1" Hard-Dome Tweeter
- 4" Metal Matrix Polymer Woofer
- 75-30kHz Frequency Response
- 85 dB Sensitivity
- Impedance: 6ohms
- Power Range:10-50watts
- Dimensions (H x W x D): 150.0" x 5.8750" x 3.9375"( 150.0 x 150.0 x 101.0mm )
What size room are the Revel B28W and Monitor Audio CS140 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Revel B28W |
Monitor Audio CS140 |
| Near-field |
Are you nuts? |
Good |
| Small Room |
Bad |
Good |
| Mid-size Room |
Poor |
Average |
| Large Room |
Good |
Poor |
| Very Large Room |
Good |
No way |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the Revel B28W and Monitor Audio CS140 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
One of the fundamental differences between these two speakers is that B28W is a 1-way design whereas the CS140 is a 2-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
| Driver |
Revel B28W |
Monitor Audio CS140 |
|
Driver Setup
|
1-way
|
2-way
|
|
Tweeter
|
-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
2 x 8-inch
|
1 x 4-inch
|
B28W features a " Tweeter and 2 x 8" Polymer-coated aluminum Woofer . On the other hand, the CS140 features a 1" Hard-Dome Tweeter and 1 x 4" Metal Matrix Polymer Woofer .
Frequency Response
B28W has a frequency range of 36-150Hz whereas CS140 has a frequency range of 75-30kHz. With a minimum frequency of 36Hz, the B28W can go significantly deeper on the low side and provide stronger bass compared to the CS140's min frequency of 75Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the In-wall class in our database.
Low Frequency
In-wall Speakers
High Frequency
In-wall Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
B28W is a 8 ohms speaker compared to the CS140 which has a nominal impedance of 6 ohms.
These two speakers also have different sensitivity levels. B28W sensitivity is rated at 0 dB and the CS140's is rated at 85 dB. This 85 dB difference makes the Monitor Audio CS140 a more sensitive speaker compared to Revel B28W, hence will play louder with the same amount of watts.
Sensitivity
In-wall Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
B28W can handle a max power of 350 watts RMS from the amp the whereas CS140 has a max power handling value of 50 watts RMS, 300 watts less than the B28W.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
B28W features Spring post type posts and CS140 has a Spring post type posts. None of these speakers feature bi-amping/bi-wiring.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Revel B28W's and Monitor Audio CS140's external dimensions. Revel B28W has external dimensions of 597.0 x 369.0 x 102.0mm ( 23.5000-inch x 14.5000-inch x 4.0000-inch) whereas Monitor Audio CS140 has external dimensions of 150.0 x 150.0 x 101.0mm ( 5.8750-inch x 5.8750-inch x 3.9375-inch) .
Revel B28W is clearly the larger of the two speakers. Its body is 219mm wider, 447mm taller and 1mm deeper than Monitor Audio CS140.
What's in the Box of Revel B28W?
Here are the items that are included inside the box of B28W:
In-wall subwooferGrille8 Screws8 Washers8 IsolatorsOwners Manual
What's in the Box of Monitor Audio CS140?
Here are the items that come with the CS140:
In-ceiling speakerGrillePaint skimInstallation GuideImportant Safety InstructionsCutout Template