In this review, we will be comparing Q Acoustics 5090 and RP-500C II, two Passive Center Channel speakers from Q Acoustics and Klipsch. Let's have a brief look at the main features
of Q Acoustics 5090 and Klipsch RP-500C II first before getting into our more
detailed comparison.
What size room are the Q Acoustics 5090 and Klipsch RP-500C II speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Q Acoustics 5090 and Klipsch RP-500C II compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Q Acoustics 5090 and RP-500C II are 2-way speakers.
| Driver |
Q Acoustics 5090 |
Klipsch RP-500C II |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
2 x 4.5-inch
|
2 x 5.25-inch
|
Q Acoustics 5090 features a 1" Soft-dome Tweeter and 2 x 4.5" Continuous Curved Cone Woofer with a Crossover frequency at 2100 Hz. On the other hand, the RP-500C II features a 1" titanium Tractrix Horn Tweeter and 2 x 5.25" Cerametallic cone Woofer with a Crossover frequency at 1630 Hz.
Frequency Response
Q Acoustics 5090 has a frequency range of 57-30k Hz whereas RP-500C II has a frequency range of 60-25k Hz. With a minimum frequency of 57Hz, the Q Acoustics 5090 can go slightly deeper then the RP-500C II's min frequency of 60Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Center Channel class in our database.
Low Frequency
Center Channel Speakers
High Frequency
Center Channel Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Q Acoustics 5090 is a 6 ohms speaker compared to the RP-500C II which has a nominal impedance of 8 ohms.
These two speakers also have different sensitivity levels. Q Acoustics 5090 sensitivity is rated at 90.5 dB and the RP-500C II's is rated at 96 dB. This 5 dB difference makes the Klipsch RP-500C II a more sensitive speaker compared to Q Acoustics 5090, hence will play louder with the same amount of watts.
Sensitivity
Center Channel Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Q Acoustics 5090 can handle a max power of 150 watts RMS from the amp the whereas RP-500C II has a max power handling value of 100 watts RMS, 50 watts less than the Q Acoustics 5090.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Q Acoustics 5090 features Binding post type posts and RP-500C II has a Binding post type posts. None of these speakers feature bi-amping/bi-wiring.
Q Acoustics 5090's Binding post terminals
Cabinet Type and Port Position
Both Q Acoustics 5090 and RP-500C II have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Q Acoustics 5090's and Klipsch RP-500C II's external dimensions. Q Acoustics 5090 has external dimensions of 166.0 x 431.0 x 245.0mm ( 6-1/2inch x 16-15/16inch x 9-5/8inch ) whereas Klipsch RP-500C II has external dimensions of 177.0 x 494.0 x 269.0mm ( 6-15/16 x 19-7/16 x 10-9/16inch) .
Klipsch RP-500C II is clearly the larger of the two speakers. Its body is 63mm wider, 11mm taller and 24mm deeper than Q Acoustics 5090.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Q Acoustics 5090 is approximately 1056.0cm2 / 163.7inch2 and base area of the Klipsch RP-500C II is approximately 1328.9cm2 / 206.0inch2. The Q Acoustics 5090 requires 21% less surface area than the RP-500C II which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Q Acoustics 5090 weighs 8.50kg / 18.7lbs and the Klipsch RP-500C II weighs 8.20kg / 18lbs. This makes the Q Acoustics 5090 4% heavier than the RP-500C II.
Here is a comparison of how Q Acoustics 5090 and RP-500C II's weights compare with the average, max and min weights in Passive Center Channel class.
Weight
All Center Channel Speakers
What's in the Box of Q Acoustics 5090?
Here are the items that are included inside the box of Q Acoustics 5090:
1x 5090 loudspeaker 1x Owners manual 2x Foam bung
What's in the Box of Klipsch RP-500C II?
Here are the items that come with the RP-500C II:
Center channel loudspeakerGrilleTilt rod (attached nut)User ManualImportant Safety InstructionsWarranty Information
 Max Input Power |
150 watts
vs
100 watts
|
Handle more power from your amplifier |
 Low Frequency Response |
57 Hz
vs
60 Hz
|
Generates deeper bass |
 High Frequency Response |
30k Hz
vs
25k Hz
|
Generates higher frequency |
 Height |
166mm
vs
177mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1056cm2 (431x245mm)
vs
1328cm2 (494x269mm)
|
Takes less floor space |
 Sensitivity |
96 dB
vs
91 dB
|
Play louder with same amount of amplification power |
 Nominal Impedance |
8 ohms
vs
6 ohms
|
Less selective with amplifiers |
| Woofer Size |
5.25 inches
vs
4.5 inches
|
Larger woofer |
 Price per pair* |
499USD
vs
599USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Q Acoustics 5090 |
Klipsch Reference Premiere RP-500C II |
| Brand |
Q Acoustics |
Klipsch |
| Speaker Type |
Center channel speaker |
Center channel speaker |
| Power Range |
25-150 watts |
up to 100 watts |
| Sensitivity |
90.5 dB |
96 dB |
| Impedance |
6 ohms |
8 ohms |
| Impedance |
3.2 ohms |
n/a |
| Frequency Response |
57-30k Hz |
60-25k Hz |
Drivers |
|
|
| Woofer Quantity |
2 |
2 |
| Woofer Size |
4.5" |
5.25" |
| Woofer Composition |
Continuous Curved Cone |
Cerametallic cone |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
Soft-dome |
Tractrix Horn |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
2100 Hz |
1630 Hz |
| Firing Direction |
rear |
rear |
Physical Specs |
|
|
| Height |
166.0mm (6.5") |
177.0mm (7") |
| Width |
431.0mm (17") |
494.0mm (19.4") |
| Depth |
245.0mm (9.6") |
269.0mm (10.6") |
| Weight |
8.50kg (18.7lbs) |
8.20kg (18lbs) |
| Enclosure |
Bass Relfex |
Bass Reflex |
| Finish |
MDF |
MDF/Wood-grain vinyl |
| Available Colors |
Holme Oak,Satin Black,Satin White,Santos Rosewood |
Walnut, Black |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
No |
No |
Other |
|
|
| Parts Warranty |
5 years |
5 Years |
| Labor Warranty |
5 years |
5 Years |