In this review, we will be comparing 3090Ci and Airmotiv C1+, two Passive Center Channel speakers from Q Acoustics and Emotiva.
Let's have a brief look at the main features
of Q Acoustics 3090Ci and Emotiva Airmotiv C1+ first before getting into our more
detailed comparison.
Q Acoustics 3090Ci Key Specs
- 2-way Design
- 1" Soft-dome Tweeter
- 2 x 4" Coated paper Woofer
- 75-30k Hz Frequency Response
- 89 dB Sensitivity
- Impedance: 6ohms
- Power Range:25-100watts
- Weight:6.00kg
- Dimensions (H x W x D): 153.0" x 16.9" x 8.5"( 153 x 430 x 216 mm )
Emotiva Airmotiv C1+ Key Specs
- 3-way Design
- 25×32 mm" folded ribbon Tweeter
- 3" Midrange
- 2 x 5.25" woven fiber cone Woofer
- 3" Midrange
- 50 Hz – 28 kHz Frequency Response
- 89 dB Sensitivity
- Impedance: 4ohms
- Power Range:Up to 120watts
- Weight:8.45kg
- Dimensions (H x W x D): 197.0" x 20-1/2" x 8-1/4"( 197.0 x 521.0 x 210.0mm )
What size room are the Q Acoustics 3090Ci and Emotiva Airmotiv C1+ speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Q Acoustics 3090Ci |
Emotiva Airmotiv C1+ |
| Near-field |
Average |
Poor |
| Small Room |
Good |
Average |
| Mid-size Room |
Average |
Good |
| Large Room |
Poor |
Average |
| Very Large Room |
Bad |
Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the Q Acoustics 3090Ci and Emotiva Airmotiv C1+ compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
One of the fundamental differences between these two speakers is that 3090Ci is a 2-way design whereas the Airmotiv C1+ is a 3-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
| Driver |
Q Acoustics 3090Ci |
Emotiva Airmotiv C1+ |
|
Driver Setup
|
2-way
|
3-way
|
|
Tweeter
|
1-inch
|
25×32 mm-inch
|
|
Midrange
|
- |
1 x 3-inch |
|
Woofer
|
2 x 4-inch
|
2 x 5.25-inch
|
3090Ci features a 1" Soft-dome Tweeter and 2 x 4" Coated paper Woofer with a Crossover frequency at 2700 Hz. On the other hand, the Airmotiv C1+ features a 25×32 mm" folded ribbon Tweeter , a 3" Midrange and 2 x 5.25" woven fiber cone Woofer with a Crossover frequency at 550 Hz and 2600Hz.
Frequency Response
3090Ci has a frequency range of 75-30k Hz whereas Airmotiv C1+ has a frequency range of 50 Hz – 28 kHz. With a minimum frequency of 50Hz, the Airmotiv C1+ can go significantly deeper on the low side and provide stronger bass compared to the 3090Ci's min frequency of 75Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Center Channel class in our database.
Low Frequency
Center Channel Speakers
High Frequency
Center Channel Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
3090Ci is a 6 ohms speaker compared to the Airmotiv C1+ which has a nominal impedance of 4 ohms. Lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit especially when played at high volume levels, so make sure the amp you pair with the Airmotiv C1+ can provide this impedance level.
On the other hand, they have the same sensitivity of 89 dBdB.
Sensitivity
Center Channel Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
3090Ci can handle a max power of 120 watts RMS from the amp the whereas 3090Ci has a max power handling value of 100 watts RMS , 20 watts less than the Airmotiv C1+.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Airmotiv C1+ features Binding post posts which make bi-amping or bi-wiring possible. 3090Ci has a Binding post which doesn't feature bi-amping/bi-wiring.
Q Acoustics 3090Ci's Binding post terminals
Emotiva Airmotiv C1+'s Binding post terminals allows Bi-amping or bi-wiring
Cabinet Type and Port Position
Both 3090Ci and Airmotiv C1+ have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Q Acoustics 3090Ci's and Emotiva Airmotiv C1+'s external dimensions. Q Acoustics 3090Ci has external dimensions of 153 x 430 x 216 mm ( 6 x 16.9 x 8.5 in) whereas Emotiva Airmotiv C1+ has external dimensions of 197.0 x 521.0 x 210.0mm ( 7-3/4 x 20-1/2 x 8-1/4inch) .
Q Acoustics 3090Ci is 91mm narrower and 44mm shorter than Emotiva Airmotiv C1+ but it is also 6mm deeper.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Q Acoustics 3090Ci is approximately 928.8cm2 / 144.0inch2 and base area of the Emotiva Airmotiv C1+ is approximately 1094.1cm2 / 169.6inch2. The 3090Ci requires 15% less surface area than the Airmotiv C1+ which gives it a small advantage on placement in tight spaces.