In this review, we will be comparing S15 and RTi A3, two Passive Bookshelf speakers by Polk Audio
Let's have a brief look at the main features
of Polk S15 and Polk RTi A3 first before getting into our more
detailed comparison.
Polk S15 Key Specs
- 2-way Design
- 1" Dome Tweeter
- 5.25" Mica-reinforced polypropylene Woofer
- 50-40k Hz Frequency Response
- 88 dB Sensitivity
- Impedance: 8ohms
- Power Range:20-100watts
- Weight:5.90kg
- Dimensions (H x W x D): 304.8" x 7.4" x 10.2"( 304.8 x 190.0 x 260.4mm )
Polk RTi A3 Key Specs
- 2-way Design
- 1" Dome Tweeter
- 6.5" Polymer composite Woofer
- 50-26k Hz Frequency Response
- 89 dB Sensitivity
- Impedance: 8ohms
- Power Range:20-150watts
- Weight:7.26kg
- Dimensions (H x W x D): 374.7" x 8.4" x 14.0"( 374.7 x 214.4 x 355.6mm )
What size room are the Polk S15 and Polk RTi A3 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Polk S15 |
Polk RTi A3 |
| Near-field |
Average |
Poor |
| Small Room |
Good |
Average |
| Mid-size Room |
Average |
Good |
| Large Room |
Poor |
Average |
| Very Large Room |
Bad |
Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the Polk S15 and Polk RTi A3 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both S15 and RTi A3 are 2-way speakers.
| Driver |
Polk S15 |
Polk RTi A3 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 5.25-inch
|
1 x 6.5-inch
|
S15 features a 1" Terylene Dome Tweeter and 1 x 5.25" Mica-reinforced polypropylene Woofer with a Crossover frequency at 2500Hz. On the other hand, the RTi A3 features a 1" silk polymer composite Dome Tweeter and 1 x 6.5" Polymer composite Woofer with a Crossover frequency at 2800Hz.
Frequency Response
S15 has a frequency range of 50-40k Hz whereas RTi A3 has a frequency range of 50-26k Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
S15 and RTi A3 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. S15 sensitivity is rated at 88 dB and the RTi A3's is at 89 dB. This 1 dB difference makes the Polk RTi A3 a more sensitive speaker compared to Polk S15, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
S15 can handle a max power of 150 watts RMS from the amp the whereas S15 has a max power handling value of 100 watts RMS , 50 watts less than the RTi A3.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
RTi A3 features Pair of Dual 5-way Binding Posts - Gold-Plated posts which make bi-amping or bi-wiring possible. S15 has a Pair of Binding Posts - Gold Plated which doesn't feature bi-amping/bi-wiring.
Cabinet Type and Port Position
S15 has a rear firing port whereas RTi A3 has a back and front firing ports.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Polk S15's and Polk RTi A3's external dimensions. Polk S15 has external dimensions of 304.8 x 190.0 x 260.4mm ( 12.0 x 7.4 x 10.2inch) whereas Polk RTi A3 has external dimensions of 374.7 x 214.4 x 355.6mm ( 14.7 x 8.4 x 14.0inch) .
Polk RTi A3 is clearly the larger of the two speakers. Its body is 24.4mm wider, 69.9mm taller and 95.2mm deeper than Polk S15.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Polk S15 is approximately 494.8cm2 / 76.7inch2 and base area of the Polk RTi A3 is approximately 762.4cm2 / 118.2inch2. The S15 requires 35% less surface area than the RTi A3 which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Polk S15 weighs 5.90kg / 13lbs and the Polk RTi A3 weighs 7.26kg / 16lbs. This makes the RTi A3 23% heavier than the S15.
Here is a comparison of how S15 and RTi A3's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Polk S15?
Here are the items that are included inside the box of S15:
2 Bookshelf loudspeakers2 Grille (attached)8 Self-adhesive rubber feetWall-mount templateOwners ManualOnline Product Registration
What's in the Box of Polk RTi A3?
Here are the items that come with the RTi A3:
2 Cherry bookshelf speakers 2 Self-tapping screws 8 Self-adhesive rubber feet Owner's Manual Template Online registration sheet Polk Audio product brochure
 High Frequency Response |
40k Hz
vs
26k Hz
|
Generates higher frequency |
 Height |
304mm
vs
374mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
494cm2
vs
762cm2
|
Takes less floor space |
 Price per pair* |
259USD
vs
465USD
|
costs less (*prices may change depending on the seller, location and time) |
 Max Input Power |
150 watts
vs
100 watts
|
Handle more power from your amplifier |
 Sensitivity |
89 dB
vs
88 dB
|
Play louder with same amount of amplification power |
 Woofer Size |
6.5 inches
vs
5.25 inches
|
Larger woofer |
 Bi-Amping and Bi-Wiring |
Yes
vs
No
|
Allows bi-amping and bi-wiring connections |
| General |
Polk Audio Signature S15 |
Polk Audio RTi A3 |
| Brand |
Polk Audio |
Polk Audio |
| Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
| Power Range |
20-100 watts |
20-150 watts |
| Sensitivity |
88 dB |
89 dB |
| Impedance |
8 ohms |
8 ohms |
| Frequency Response |
50-40k Hz |
50-26k Hz |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
5.25" |
6.5" |
| Woofer Composition |
Mica-reinforced polypropylene |
Polymer composite |
| Woofer Surround Material |
Butyl rubber |
Butyl rubber |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
Dome |
Dome |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
2500Hz |
2800Hz |
| Firing Direction |
rear |
back and front |
Physical Specs |
|
|
| Height |
304.8mm (12") |
374.7mm (14.8") |
| Width |
190.0mm (7.5") |
214.4mm (8.4") |
| Depth |
260.4mm (10.3") |
355.6mm (14") |
| Weight |
5.90kg (13lbs) |
7.26kg (16lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
Meddite MDF |
Real wood veneer |
| Available Colors |
Black, Walnut, Brown Walnut |
Black, Cherry |
| Mounting Bracket |
Keyhole |
Keyhole |
| Recommended Stand Height |
24-30" |
24-31" |
| Grille |
Yes |
n/a |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
No |
Yes |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |