In this review, we will be comparing ES60 and Silver 500 7G, two Passive Floor-standing speakers from Polk Audio and Monitor Audio.
Let's have a brief look at the main features
of Polk ES60 and Monitor Audio Silver 500 7G first before getting into our more
detailed comparison.
Polk ES60 Key Specs
- 2-way Design
- 1" Soft-Dome Tweeter
- 3 x 6.5" Mica-reinforced polypropylene Woofer
- 32-40k Hz Frequency Response
- 90 dB Sensitivity
- Impedance: 8ohms
- Power Range:50-300watts
- Weight:23.60kg
- Dimensions (H x W x D): 1131.0" x 8-1/2" x 15-3/4"( 1131.0 x 216.0 x 401.0mm )
Monitor Audio Silver 500 7G Key Specs
- 3-way Design
- 1" gold dome C-CAM with Uniform Dispersion (UD) Waveguide II Tweeter
- 3" Midrange
- 2 x 8" C-CAM RST II Woofer
- 3" Midrange
- 27-35k Hz Frequency Response
- 90.5 dB Sensitivity
- Impedance: 8ohms
- Power Range:80-250watts
- Weight:22.53kg
- Dimensions (H x W x D): 1085.0" x 12-11/16" x 15-7/16"( 1085.0 x 323.0 x 393.0mm )
What size room are the Polk ES60 and Monitor Audio Silver 500 7G speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Polk ES60 |
Monitor Audio Silver 500 7G |
| Near-field |
Bad |
Bad |
| Small Room |
Poor |
Poor |
| Mid-size Room |
Average |
Average |
| Large Room |
Good |
Good |
| Very Large Room |
Average |
Average |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the Polk ES60 and Monitor Audio Silver 500 7G compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
One of the fundamental differences between these two speakers is that ES60 is a 2-way design whereas the Silver 500 7G is a 3-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
| Driver |
Polk ES60 |
Monitor Audio Silver 500 7G |
|
Driver Setup
|
2-way
|
3-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
1 x 3-inch |
|
Woofer
|
3 x 6.5-inch
|
2 x 8-inch
|
ES60 features a 1" Terylene High-Res Soft-Dome Tweeter and 3 x 6.5" Mica-reinforced polypropylene Woofer with a Crossover frequency at 2500Hz. On the other hand, the Silver 500 7G features a 1" gold dome C-CAM with Uniform Dispersion (UD) Waveguide II Tweeter , a 3" Midrange and 2 x 8" C-CAM RST II Woofer .
Frequency Response
ES60 has a frequency range of 32-40k Hz whereas Silver 500 7G has a frequency range of 27-35k Hz. With a minimum frequency of 27Hz, the Silver 500 7G can go significantly deeper on the low side and provide stronger bass compared to the ES60's min frequency of 32Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
Monitor Audio Silver 500 7G
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
ES60 and Silver 500 7G have the same Impedance of 8 ohms but where they differ is the sensitivity levels. ES60 sensitivity is rated at 90 dB and the Silver 500 7G's is at 90.5 dB. This 1 dB difference makes the Monitor Audio Silver 500 7G a more sensitive speaker compared to Polk ES60, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
ES60 can handle a max power of 300 watts RMS from the amp the whereas Silver 500 7G has a max power handling value of 250 watts RMS, 50 watts less than the ES60.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Both ES60 and Silver 500 7G features dual binding post speaker terminals for bi-amping or bi-wiring.
Cabinet Type and Port Position
ES60 has a bottom firing port whereas Silver 500 7G has a rear firing ports. Polk ES60's bottom-firing port gives more flexibility in placement in regards to proximity to walls compared to Monitor Audio Silver 500 7G with its rear-firing port.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Polk ES60's and Monitor Audio Silver 500 7G's external dimensions. Polk ES60 has external dimensions of 1131.0 x 216.0 x 401.0mm ( 44-1/2 x 8-1/2 x 15-3/4inch) whereas Monitor Audio Silver 500 7G has external dimensions of 1085.0 x 323.0 x 393.0mm ( 42-11/16 x 12-11/16 x 15-7/16inch) .
Monitor Audio Silver 500 7G is 46mm shorter and 8mm less deeper than Polk ES60 but it is also 107mm wider.
Below you can see the front view size comparison of Polk ES60 and Monitor Audio Silver 500 7G in scale.
Comparison image of Polk ES60 and Monitor Audio Silver 500 7G Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Polk ES60 is approximately 866.2cm2 / 134.3inch2 and base area of the Monitor Audio Silver 500 7G is approximately 1269.4cm2 / 196.8inch2. The ES60 requires 32% less surface area than the Silver 500 7G which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Polk ES60 weighs 23.60kg / 51.9lbs and the Monitor Audio Silver 500 7G weighs 22.53kg / 49.6lbs. This makes the ES60 5% heavier than the Silver 500 7G.
Here is a comparison of how ES60 and Silver 500 7G's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
Monitor Audio Silver 500 7G
What's in the Box of Polk ES60?
Here are the items that are included inside the box of ES60:
Floorstanding loudspeakerGrille (attached)4 Feet (pre-installed)Owners ManualOnline Product Registration
What's in the Box of Monitor Audio Silver 500 7G?
Here are the items that come with the Silver 500 7G:
Floorstanding loudspeakerGrille4 Outrigger feet4 Rubber feet (pre-installed on outrigger feet)4 Spikes4 Bolts4 Machine screws2 Foam port plugs2 Hex-keysOwners ManualImportant Safety Instructions
 Max Input Power |
300 watts
vs
250 watts
|
Handle more power from your amplifier |
 Number of Woofers |
3
vs
2
|
More woofers |
 High Frequency Response |
40k Hz
vs
35k Hz
|
Generates higher frequency |
 Base Surface Area |
866cm2
vs
1269cm2
|
Takes less floor space |
 Price per pair* |
1098USD
vs
3200USD
|
costs less (*prices may change depending on the seller, location and time) |
 Driver Setup |
3-way
vs
2-way
|
Have a dedicated mid-range driver |
 Sensitivity |
91 dB
vs
90 dB
|
Play louder with same amount of amplification power |
|
Woofer Size |
8 inches
vs
6.5 inches
|
Larger woofer |
|
Low Frequency Response |
27 Hz
vs
32 Hz
|
Generates deeper bass |
 Height |
1085mm
vs
1131mm
|
Easier to fit in smaller spaces |
| General |
Polk Audio Signature Elite ES60 |
Monitor Audio Silver 500 7G |
| Brand |
Polk Audio |
Monitor Audio |
| Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
| Power Range |
50-300 watts |
80-250 watts |
| Sensitivity |
90 dB |
90.5 dB |
| Impedance |
8 ohms |
8 ohms |
| Frequency Response |
32-40k Hz |
27-35k Hz |
Drivers |
|
|
| Woofer Quantity |
3 |
2 |
| Woofer Size |
6.5" |
8" |
| Woofer Composition |
Mica-reinforced polypropylene |
C-CAM RST II |
| Woofer Surround Material |
Butyl rubber |
Rubber |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
Soft-Dome |
gold dome C-CAM with Uniform Dispersion (UD) Waveguide II |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
3" |
| Crossover Frequency |
2500Hz |
n/a |
| Firing Direction |
bottom |
rear |
Physical Specs |
|
|
| Height |
1131.0mm (44.5") |
1085.0mm (42.7") |
| Width |
216.0mm (8.5") |
323.0mm (12.7") |
| Depth |
401.0mm (15.8") |
393.0mm (15.5") |
| Weight |
23.60kg (51.9lbs) |
22.53kg (49.6lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
MDF, Wood-grain vinyl |
MDF/Wood veneer |
| Available Colors |
Black |
Oak |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
Yes |
Yes |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |