In this review, we will be comparing ES60 and Chora 826-D, two Passive Floor-standing speakers from Polk Audio and Focal. Let's have a brief look at the main features
of Polk ES60 and Focal Chora 826-D first before getting into our more
detailed comparison.
What size room are the Polk ES60 and Focal Chora 826-D speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Polk ES60 and Focal Chora 826-D compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
One of the fundamental differences between these two speakers is that ES60 is a 2-way design whereas the Chora 826-D is a 3-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
| Driver |
Polk ES60 |
Focal Chora 826-D |
|
Driver Setup
|
2-way
|
3-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
1 x 6.5-inch |
|
Woofer
|
3 x 6.5-inch
|
2 x 6.5-inch
|
ES60 features a 1" Terylene High-Res Soft-Dome Tweeter and 3 x 6.5" Mica-reinforced polypropylene Woofer with a Crossover frequency at 2500Hz. On the other hand, the Chora 826-D features a 1" TNF Al/Mg inverted dome Tweeter , a 6.5" Midrange and 2 x 6.5" Slatefiber Woofer with a Crossover frequency at 270Hz and 2700Hz.
Frequency Response
ES60 has a frequency range of 32-40k Hz whereas Chora 826-D has a frequency range of 48-28k Hz. With a minimum frequency of 32Hz, the ES60 can go significantly deeper on the low side and provide stronger bass compared to the Chora 826-D's min frequency of 48Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
ES60 and Chora 826-D have the same Impedance of 8 ohms but where they differ is the sensitivity levels. ES60 sensitivity is rated at 90 dB and the Chora 826-D's is at 91 dB. This 1 dB difference makes the Focal Chora 826-D a more sensitive speaker compared to Polk ES60, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
ES60 can handle a max power of 300 watts RMS from the amp the whereas Chora 826-D has a max power handling value of 250 watts RMS, 50 watts less than the ES60.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
ES60 features 5-Way post posts which make bi-amping or bi-wiring possible. Chora 826-D has a Binding post which doesn't feature bi-amping/bi-wiring.
Focal Chora 826-D's Binding post terminals
Cabinet Type and Port Position
ES60 has a bottom firing port whereas Chora 826-D has a front firing ports. Focal Chora 826-D's front-firing port gives more flexibility in placement in regards to proximity to walls compared to Polk ES60 with its rear-firing port.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Polk ES60's and Focal Chora 826-D's external dimensions. Polk ES60 has external dimensions of 1131.0 x 216.0 x 401.0mm ( 44-1/2 x 8-1/2 x 15-3/4inch) whereas Focal Chora 826-D has external dimensions of 1053.0 x 305.0 x 420.0mm ( 41-7/16 x 12 x 16-1/2inch) .
Polk ES60 is 89mm narrower and 19mm less deeper than Focal Chora 826-D but it is also 78mm taller.
Below you can see the front view size comparison of Polk ES60 and Focal Chora 826-D in scale.
Comparison image of Polk ES60 and Focal Chora 826-D Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Polk ES60 is approximately 866.2cm2 / 134.3inch2 and base area of the Focal Chora 826-D is approximately 1281.0cm2 / 198.6inch2. The ES60 requires 32% less surface area than the Chora 826-D which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Polk ES60 weighs 23.60kg / 51.9lbs and the Focal Chora 826-D weighs 22.20kg / 48.8lbs. This makes the ES60 6% heavier than the Chora 826-D.
Here is a comparison of how ES60 and Chora 826-D's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
What's in the Box of Polk ES60?
Here are the items that are included inside the box of ES60:
Floorstanding loudspeakerGrille (attached)4 Feet (pre-installed)Owners ManualOnline Product Registration
What's in the Box of Focal Chora 826-D?
Here are the items that come with the Chora 826-D:
Dolby-Atmos enabled floorstanding loudspeakerBase4 Rubber feet4 Spike feet4 Nuts4 Screws4 WashersHex-key2 GrillesUser manual
 Max Input Power |
300 watts
vs
250 watts
|
Handle more power from your amplifier |
 Number of Woofers |
3
vs
2
|
More woofers |
| Low Frequency Response |
32 Hz
vs
48 Hz
|
Generates deeper bass |
 High Frequency Response |
40k Hz
vs
28k Hz
|
Generates higher frequency |
 Bi-Amping and Bi-Wiring |
Yes
vs
No
|
Allows bi-amping and bi-wiring connections |
 Base Surface Area |
866cm2 (216x401mm)
vs
1281cm2 (305x420mm)
|
Takes less floor space |
 Price per pair* |
1098USD
vs
2998USD
|
costs less (*prices may change depending on the seller, location and time) |
 Driver Setup |
3-way
vs
2-way
|
Have a dedicated mid-range driver |
 Sensitivity |
91 dB
vs
90 dB
|
Play louder with same amount of amplification power |
 Dolby Atmos Drivers |
Built-in 1 x 5-1/8
vs
No
|
Dolby Atmos Compatibility |
 Height |
1053mm
vs
1131mm
|
Easier to fit in smaller spaces |
| General |
Polk Audio Signature Elite ES60 |
Focal Chora 826-D |
| Brand |
Polk Audio |
Focal |
| Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
| Power Range |
50-300 watts |
40-250 watts |
| Sensitivity |
90 dB |
91 dB |
| Impedance |
8 ohms |
8 ohms |
| Impedance |
n/a |
2.9 ohms |
| Frequency Response |
32-40k Hz |
48-28k Hz |
Drivers |
|
|
| Woofer Quantity |
3 |
2 |
| Woofer Size |
6.5" |
6.5" |
| Woofer Composition |
Mica-reinforced polypropylene |
Slatefiber |
| Woofer Surround Material |
Butyl rubber |
Rubber |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
Soft-Dome |
inverted dome |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
6.5" |
| Crossover Frequency |
2500Hz |
270Hz and 2700Hz |
| Firing Direction |
bottom |
front |
Physical Specs |
|
|
| Height |
1131.0mm (44.5") |
1053.0mm (41.5") |
| Width |
216.0mm (8.5") |
305.0mm (12") |
| Depth |
401.0mm (15.8") |
420.0mm (16.5") |
| Weight |
23.60kg (51.9lbs) |
22.20kg (48.8lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
MDF, Wood-grain vinyl |
MDF/Vinyl-wrap |
| Available Colors |
Black |
Black, Dark wood, Light wood |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
Yes |
No |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |