In this review, we will be comparing ES60 and Emit M30, two Passive Floor-standing speakers from Polk Audio and Dynaudio.
Let's have a brief look at the main features
of Polk ES60 and Dynaudio Emit M30 first before getting into our more
detailed comparison.
Polk ES60 Key Specs
- 2-way Design
- 1" Soft-Dome Tweeter
- 3 x 6.5" Mica-reinforced polypropylene Woofer
- 32-40k Hz Frequency Response
- 90 dB Sensitivity
- Impedance: 8ohms
- Power Range:50-300watts
- Weight:23.60kg
- Dimensions (H x W x D): 1131.0" x 8-1/2" x 15-3/4"( 1131.0 x 216.0 x 401.0mm )
Dynaudio Emit M30 Key Specs
- 2-way Design
- 1.1" Tweeter
- 2 x 6.6875" Magnesium Silicate Polymer Woofer
- 40-23k Hz Frequency Response
- 86 dB Sensitivity
- Impedance: 4ohms
- Power Range:up to 200watts
- Weight:18.18kg
- Dimensions (H x W x D): 961.0" x 8-1/16" x 11-5/8"( 961.0 x 205.0 x 296.0mm )
What size room are the Polk ES60 and Dynaudio Emit M30 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Polk ES60 |
Dynaudio Emit M30 |
| Near-field |
Bad |
Bad |
| Small Room |
Poor |
Poor |
| Mid-size Room |
Average |
Good |
| Large Room |
Good |
Good |
| Very Large Room |
Average |
Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the Polk ES60 and Dynaudio Emit M30 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both ES60 and Emit M30 are 2-way speakers.
| Driver |
Polk ES60 |
Dynaudio Emit M30 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1.1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
3 x 6.5-inch
|
2 x 6.6875-inch
|
ES60 features a 1" Terylene High-Res Soft-Dome Tweeter and 3 x 6.5" Mica-reinforced polypropylene Woofer with a Crossover frequency at 2500Hz. On the other hand, the Emit M30 features a 1.1" Tweeter and 2 x 6.6875" Magnesium Silicate Polymer Woofer .
Frequency Response
ES60 has a frequency range of 32-40k Hz whereas Emit M30 has a frequency range of 40-23k Hz. With a minimum frequency of 32Hz, the ES60 can go significantly deeper on the low side and provide stronger bass compared to the Emit M30's min frequency of 40Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
ES60 is a 8 ohms speaker compared to the Emit M30 which has a nominal impedance of 4 ohms. Lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit especially when played at high volume levels, so make sure the amp you pair with the Emit M30 can provide this impedance level.
These two speakers also have different sensitivity levels. ES60 sensitivity is rated at 90 dB and the Emit M30's is rated at 86 dB. This 4 dB difference makes the Polk ES60 a more sensitive speaker compared to Dynaudio Emit M30, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
ES60 can handle a max power of 300 watts RMS from the amp the whereas Emit M30 has a max power handling value of 200 watts RMS, 100 watts less than the ES60.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
ES60 features 5-Way post posts which make bi-amping or bi-wiring possible. Emit M30 has a Binding post which doesn't feature bi-amping/bi-wiring.
Dynaudio Emit M30's Binding post terminals
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Polk ES60's and Dynaudio Emit M30's external dimensions. Polk ES60 has external dimensions of 1131.0 x 216.0 x 401.0mm ( 44-1/2 x 8-1/2 x 15-3/4inch) whereas Dynaudio Emit M30 has external dimensions of 961.0 x 205.0 x 296.0mm ( 37-13/16 x 8-1/16 x 11-5/8inch) .
Polk ES60 is clearly the larger of the two speakers. Its body is 11mm wider, 170mm taller and 105mm deeper than Dynaudio Emit M30.
Below you can see the front view size comparison of Polk ES60 and Dynaudio Emit M30 in scale.
Comparison image of Polk ES60 and Dynaudio Emit M30 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Polk ES60 is approximately 866.2cm2 / 134.3inch2 and base area of the Dynaudio Emit M30 is approximately 606.8cm2 / 94.1inch2. The ES60 requires 43% more surface area than the Emit M30 which gives it a small disadvantage on placement in tight spaces.