In this review, we will be comparing ES60 and BP-9040, two Passive Floor-standing speakers from Polk Audio and Definitive Technology.
Let's have a brief look at the main features
of Polk ES60 and Definitive BP-9040 first before getting into our more
detailed comparison.
Polk ES60 Key Specs
- 2-way Design
- 1" Soft-Dome Tweeter
- 3 x 6.5" Mica-reinforced polypropylene Woofer
- 32-40k Hz Frequency Response
- 90 dB Sensitivity
- Impedance: 8ohms
- Power Range:50-300watts
- Weight:23.60kg
- Dimensions (H x W x D): 1131.0" x 8-1/2" x 15-3/4"( 1131.0 x 216.0 x 401.0mm )
Definitive BP-9040 Key Specs
- 3-way Design
- 1" dome Tweeter
- 4.5" Midrange
- 8" Polypropelene Woofer
- 4.5" Midrange
- 22-40k Hz Frequency Response
- 92 dB Sensitivity
- Impedance: 8ohms
- Power Range:50-300watts
- Weight:16.36kg
- Dimensions (H x W x D): 993.0" x 11-1/16" x 13-13/16"( 993.0 x 281.0 x 351.0mm )
What size room are the Polk ES60 and Definitive BP-9040 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Polk ES60 |
Definitive BP-9040 |
| Near-field |
Bad |
Bad |
| Small Room |
Poor |
Poor |
| Mid-size Room |
Average |
Average |
| Large Room |
Good |
Good |
| Very Large Room |
Average |
Average |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the Polk ES60 and Definitive BP-9040 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
One of the fundamental differences between these two speakers is that ES60 is a 2-way design whereas the BP-9040 is a 3-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
| Driver |
Polk ES60 |
Definitive BP-9040 |
|
Driver Setup
|
2-way
|
3-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
3 x 4.5-inch |
|
Woofer
|
3 x 6.5-inch
|
1 x 8-inch
|
ES60 features a 1" Terylene High-Res Soft-Dome Tweeter and 3 x 6.5" Mica-reinforced polypropylene Woofer with a Crossover frequency at 2500Hz. On the other hand, the BP-9040 features a 1" annealed aluminum dome Tweeter , a 4.5" Midrange and 1 x 8" Polypropelene Woofer .
Frequency Response
ES60 has a frequency range of 32-40k Hz whereas BP-9040 has a frequency range of 22-40k Hz. With a minimum frequency of 22Hz, the BP-9040 can go significantly deeper on the low side and provide stronger bass compared to the ES60's min frequency of 32Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
ES60 and BP-9040 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. ES60 sensitivity is rated at 90 dB and the BP-9040's is at 92 dB. This 2 dB difference makes the Definitive BP-9040 a more sensitive speaker compared to Polk ES60, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
ES60 and BP-9040 has the same power range of 50-300 watts.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
ES60 features 5-Way post posts which make bi-amping or bi-wiring possible. BP-9040 has a 5-Way post, RCA which doesn't feature bi-amping/bi-wiring.
Definitive BP-9040's 5-Way post, RCA terminals
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Polk ES60's and Definitive BP-9040's external dimensions. Polk ES60 has external dimensions of 1131.0 x 216.0 x 401.0mm ( 44-1/2 x 8-1/2 x 15-3/4inch) whereas Definitive BP-9040 has external dimensions of 993.0 x 281.0 x 351.0mm ( 39-1/16 x 11-1/16 x 13-13/16inch) .
Definitive BP-9040 is 138mm shorter and 50mm less deeper than Polk ES60 but it is also 65mm wider.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Polk ES60 is approximately 866.2cm2 / 134.3inch2 and base area of the Definitive BP-9040 is approximately 986.3cm2 / 152.9inch2. The ES60 requires 12% less surface area than the BP-9040 which gives it a small advantage on placement in tight spaces.