In this review, we will be comparing ES15 and RTi A1, two Passive Bookshelf speakers by Polk Audio
Let's have a brief look at the main features
of Polk ES15 and Polk RTi A1 first before getting into our more
detailed comparison.
Polk ES15 Key Specs
- 2-way Design
- 1" Soft-Dome Tweeter
- 5.25" Mica-reinforced polypropylene Woofer
- 44-40k Hz Frequency Response
- 85 dB Sensitivity
- Impedance: 8ohms
- Power Range:20-100watts
- Weight:5.91kg
- Dimensions (H x W x D): 307.0" x 7-9/16" x 10-3/16"( 307.0 x 193.0 x 259.0mm )
Polk RTi A1 Key Specs
- 2-way Design
- 1" Dome Tweeter
- 5.25" Polymer composite Woofer
- 60-26k Hz Frequency Response
- 89 dB Sensitivity
- Impedance: 8ohms
- Power Range:20-125watts
- Weight:5.44kg
- Dimensions (H x W x D): 304.8" x 7.3" x 11.5"( 304.8 x 187.5 x 292.1mm )
What size room are the Polk ES15 and Polk RTi A1 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Polk ES15 |
Polk RTi A1 |
| Near-field |
Average |
Poor |
| Small Room |
Good |
Average |
| Mid-size Room |
Average |
Good |
| Large Room |
Poor |
Average |
| Very Large Room |
Bad |
Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the Polk ES15 and Polk RTi A1 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both ES15 and RTi A1 are 2-way speakers.
| Driver |
Polk ES15 |
Polk RTi A1 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 5.25-inch
|
1 x 5.25-inch
|
ES15 features a 1" Terylene Soft-Dome Tweeter and 1 x 5.25" Mica-reinforced polypropylene Woofer with a Crossover frequency at 2500Hz. On the other hand, the RTi A1 features a 1" silk polymer composite Dome Tweeter and 1 x 5.25" Polymer composite Woofer with a Crossover frequency at 1900Hz.
Frequency Response
ES15 has a frequency range of 44-40k Hz whereas RTi A1 has a frequency range of 60-26k Hz. With a minimum frequency of 44Hz, the ES15 can go significantly deeper on the low side and provide stronger bass compared to the RTi A1's min frequency of 60Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
ES15 and RTi A1 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. ES15 sensitivity is rated at 85 dB and the RTi A1's is at 89 dB. This 4 dB difference makes the Polk RTi A1 a more sensitive speaker compared to Polk ES15, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
ES15 can handle a max power of 125 watts RMS from the amp the whereas ES15 has a max power handling value of 100 watts RMS , 25 watts less than the RTi A1.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
RTi A1 features Pair of Dual 5-way Binding Posts - Gold-Plated posts which make bi-amping or bi-wiring possible. ES15 has a 5-Way post which doesn't feature bi-amping/bi-wiring.
Polk ES15's 5-Way post terminals
Cabinet Type and Port Position
ES15 has a rear firing port whereas RTi A1 has a back and front firing ports.
Polk ES15 Power Port Port
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Polk ES15's and Polk RTi A1's external dimensions. Polk ES15 has external dimensions of 307.0 x 193.0 x 259.0mm ( 12-1/16 x 7-9/16 x 10-3/16inch) whereas Polk RTi A1 has external dimensions of 304.8 x 187.5 x 292.1mm ( 12.0 x 7.3 x 11.5inch) .
Polk RTi A1 is 5.5mm narrower and 2.2mm shorter than Polk ES15 but it is also 33.1mm deeper.
Below you can see the front view size comparison of Polk ES15 and Polk RTi A1 in scale.
Comparison image of Polk ES15 and Polk RTi A1 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Polk ES15 is approximately 499.9cm2 / 77.5inch2 and base area of the Polk RTi A1 is approximately 547.7cm2 / 84.9inch2. The ES15 requires 9% less surface area than the RTi A1 which gives it a small advantage on placement in tight spaces.
Here is an another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:
Size Comparison image of Polk ES15 and Polk RTi A1 on a Media Console
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Polk ES15 weighs 5.91kg / 13lbs and the Polk RTi A1 weighs 5.44kg / 12lbs. This makes the ES15 9% heavier than the RTi A1.
Here is a comparison of how ES15 and RTi A1's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Polk ES15?
Here are the items that are included inside the box of ES15:
2 Bookshelf loudspeakers2 Grille (attached)8 Self-adhesive rubber feetWall-mount templateOwners ManualOnline Product Registration
What's in the Box of Polk RTi A1?
Here are the items that come with the RTi A1:
2 Cherry bookshelf speakers 2 Self-tapping screws 8 Self-adhesive rubber feet Owner's Manual Template Online registration sheet Polk Audio product brochure
 Low Frequency Response |
44 Hz
vs
60 Hz
|
Generates deeper bass |
 High Frequency Response |
40k Hz
vs
26k Hz
|
Generates higher frequency |
 Base Surface Area |
499cm2
vs
547cm2
|
Takes less floor space |
 Price per pair* |
299USD
vs
382USD
|
costs less (*prices may change depending on the seller, location and time) |
 Max Input Power |
125 watts
vs
100 watts
|
Handle more power from your amplifier |
 Sensitivity |
89 dB
vs
85 dB
|
Play louder with same amount of amplification power |
 Bi-Amping and Bi-Wiring |
Yes
vs
No
|
Allows bi-amping and bi-wiring connections |
 Height |
304mm
vs
307mm
|
Easier to fit in smaller spaces |
| General |
Polk Audio Signature Elite ES15 |
Polk Audio RTi A1 |
| Brand |
Polk Audio |
Polk Audio |
| Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
| Power Range |
20-100 watts |
20-125 watts |
| Sensitivity |
85 dB |
89 dB |
| Impedance |
8 ohms |
8 ohms |
| Frequency Response |
44-40k Hz |
60-26k Hz |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
5.25" |
5.25" |
| Woofer Composition |
Mica-reinforced polypropylene |
Polymer composite |
| Woofer Surround Material |
Butyl rubber |
Butyl rubber |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
Soft-Dome |
Dome |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
2500Hz |
1900Hz |
| Firing Direction |
rear |
back and front |
Physical Specs |
|
|
| Height |
307.0mm (12.1") |
304.8mm (12") |
| Width |
193.0mm (7.6") |
187.5mm (7.4") |
| Depth |
259.0mm (10.2") |
292.1mm (11.5") |
| Weight |
5.91kg (13lbs) |
5.44kg (12lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
MDF, Wood-grain vinyl |
Real wood veneer |
| Available Colors |
Black,White,Walnut |
Black, Cherry |
| Mounting Bracket |
Keyhole |
Keyhole |
| Recommended Stand Height |
24-28" |
28-36" |
| Grille |
Yes |
n/a |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
No |
Yes |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |