In this review, we will be comparing R400 and ES35, two Passive Center Channel speakers by Polk Audio Let's have a brief look at the main features
of Polk R400 and Polk ES35 first before getting into our more
detailed comparison.
What size room are the Polk R400 and Polk ES35 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Polk R400 and Polk ES35 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both R400 and ES35 are 2-way speakers.
| Driver |
Polk R400 |
Polk ES35 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
2 x 6.5-inch
|
6 x 3-inch
|
R400 features a 1" Pinnacle Ring Radiator Tweeter and 2 x 6.5" Polypropylene Turbine Cone Woofer with a Crossover frequency at 2500Hz. On the other hand, the ES35 features a 1" Terylene High-res dome Tweeter and 6 x 3" mica-reinforced polypropylene Dynamic Balance Woofer .
Frequency Response
R400 has a frequency range of 48-39K Hz whereas ES35 has a frequency range of 66-40k Hz. With a minimum frequency of 48Hz, the R400 can go significantly deeper on the low side and provide stronger bass compared to the ES35's min frequency of 66Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Center Channel class in our database.
Low Frequency
Center Channel Speakers
High Frequency
Center Channel Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
R400 and ES35 have the same Impedance of 8 ohms and their sensitivity is also same at 89 dB.
Sensitivity
Center Channel Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
R400 can handle a max power of 200 watts RMS from the amp the whereas ES35 has a max power handling value of 150 watts RMS, 50 watts less than the R400.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
R400 features 5-Way post type posts and ES35 has a 5-Way post type posts. None of these speakers feature bi-amping/bi-wiring.
Polk R400's Binding post terminals
Polk ES35's 5-Way post terminals
Cabinet Type and Port Position
Both R400 and ES35 have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Polk R400 dual Port
Polk ES35 Port
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Polk R400's and Polk ES35's external dimensions. Polk R400 has external dimensions of 199.0 x 618.0 x 372.0mm ( 7-13/16 x 24-5/16 x 14-5/8inch) whereas Polk ES35 has external dimensions of 107.0 x 621.0 x 154.0mm ( 4-3/16 x 24-7/16 x 6-1/16inch) .
Polk ES35 is 92mm shorter and 218mm less deeper than Polk R400 but it is also 3mm wider.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Polk R400 is approximately 2299.0cm2 / 356.3inch2 and base area of the Polk ES35 is approximately 956.3cm2 / 148.2inch2. The R400 requires 140% more surface area than the ES35 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Polk R400 weighs 14.91kg / 32.8lbs and the Polk ES35 weighs 6.36kg / 14lbs. This makes the R400 134% heavier than the ES35.
Here is a comparison of how R400 and ES35's weights compare with the average, max and min weights in Passive Center Channel class.
Weight
All Center Channel Speakers
What's in the Box of Polk R400?
Here are the items that are included inside the box of R400:
Center-channel loudspeakerGrilleOwners ManualOnline Registration
What's in the Box of Polk ES35?
Here are the items that come with the ES35:
LCR loudspeakerGrille (attached)4 Self-adhesive rubber feetWall-mount templateOwners ManualOnline Product Registration
 Max Input Power |
200 watts
vs
150 watts
|
Handle more power from your amplifier |
 Woofer Size |
6.5 inches
vs
3 inches
|
Larger woofer |
| Low Frequency Response |
48 Hz
vs
66 Hz
|
Generates deeper bass |
| Number of Woofers |
6
vs
2
|
More woofers |
 High Frequency Response |
40k Hz
vs
39k Hz
|
Generates higher frequency |
 Height |
107mm
vs
199mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
956cm2 (621x154mm)
vs
2299cm2 (618x372mm)
|
Takes less floor space |
 Price per pair* |
399USD
vs
649USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Polk Audio Reserve R400 |
Polk Audio Signature Elite ES35 |
| Brand |
Polk Audio |
Polk Audio |
| Speaker Type |
Center channel speaker |
Low-profile center channel speaker |
| Power Range |
20-200 watts |
20-150 watts |
| Sensitivity |
89 dB |
89 dB |
| Impedance |
8 ohms |
8 ohms |
| Impedance |
4.1 ohms |
n/a |
| Frequency Response |
48-39K Hz |
66-40k Hz |
Drivers |
|
|
| Woofer Quantity |
2 |
6 |
| Woofer Size |
6.5" |
3" |
| Woofer Composition |
Polypropylene Turbine Cone |
mica-reinforced polypropylene Dynamic Balance |
| Woofer Surround Material |
Rubber |
n/a |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
Pinnacle Ring Radiator |
High-res dome |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
N/A" |
N/A" |
| Crossover Frequency |
2500Hz |
n/a |
| Firing Direction |
rear |
rear |
Physical Specs |
|
|
| Height |
199.0mm (7.8") |
107.0mm (4.2") |
| Width |
618.0mm (24.3") |
621.0mm (24.4") |
| Depth |
372.0mm (14.6") |
154.0mm (6.1") |
| Weight |
14.91kg (32.8lbs) |
6.36kg (14lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
n/a |
MDF, Wood-grain vinyl |
| Available Colors |
Black, Walnut |
Black, Walnut, White |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
No |
n/a |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |