In this review, we will be comparing RTi A3 and S20, two Passive Bookshelf speakers by Polk Audio Let's have a brief look at the main features
of Polk RTi A3 and Polk S20 first before getting into our more
detailed comparison.
What size room are the Polk RTi A3 and Polk S20 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Polk RTi A3 and Polk S20 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both RTi A3 and S20 are 2-way speakers.
Driver |
Polk RTi A3 |
Polk S20 |
Driver Setup
|
2-way
|
2-way
|
Tweeter
|
1-inch
|
1-inch
|
Midrange
|
- |
- |
Woofer
|
1 x 6.5-inch
|
1 x 6.5-inch
|
RTi A3 features a 1" silk polymer composite Dome Tweeter and 1 x 6.5" Polymer composite Woofer with a Crossover frequency at 2800Hz. On the other hand, the S20 features a 1" Terylene Soft-Dome Tweeter and 1 x 6.5" Mica-reinforced polypropylene Woofer with a Crossover frequency at 2500Hz.
Frequency Response
RTi A3 has a frequency range of 50-26k Hz whereas S20 has a frequency range of 39-40k Hz. With a minimum frequency of 39Hz, the S20 can go significantly deeper on the low side and provide stronger bass compared to the RTi A3's min frequency of 50Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
RTi A3 and S20 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. RTi A3 sensitivity is rated at 89 dB and the S20's is at 88 dB. This 1 dB difference makes the Polk RTi A3 a more sensitive speaker compared to Polk S20, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
RTi A3 can handle a max power of 150 watts RMS from the amp the whereas S20 has a max power handling value of 125 watts RMS, 25 watts less than the RTi A3.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
RTi A3 features Pair of Dual 5-way Binding Posts - Gold-Plated posts which make bi-amping or bi-wiring possible. S20 has a 5-way post which doesn't feature bi-amping/bi-wiring.
Cabinet Type and Port Position
RTi A3 has a back and front firing port whereas S20 has a rear firing ports.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Polk RTi A3's and Polk S20's external dimensions. Polk RTi A3 has external dimensions of 374.7 x 214.4 x 355.6mm ( 14.7 x 8.4 x 14.0inch) whereas Polk S20 has external dimensions of 376.0 x 216.0 x 350.0mm ( 14.8 x 8.5 x 13.7inch) .
Polk RTi A3 is 1.6mm narrower and 1.3mm shorter than Polk S20 but it is also 5.6mm deeper.
Below you can see the front view size comparison of Polk RTi A3 and Polk S20 in scale.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Polk RTi A3 is approximately 762.4cm2 / 118.2inch2 and base area of the Polk S20 is approximately 756.0cm2 / 117.2inch2. The RTi A3 requires 1% more surface area than the S20 which gives it a small disadvantage on placement in tight spaces.
Here is an another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Polk RTi A3 weighs 7.26kg / 16lbs and the Polk S20 weighs 7.73kg / 17lbs. This makes the S20 6% heavier than the RTi A3.
Here is a comparison of how RTi A3 and S20's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Polk RTi A3?
Here are the items that are included inside the box of RTi A3:
2 Cherry bookshelf speakers 2 Self-tapping screws 8 Self-adhesive rubber feet Owner's Manual Template Online registration sheet Polk Audio product brochure
What's in the Box of Polk S20?
Here are the items that come with the S20:
2 Bookshelf loudspeakers2 Grilles (attached)8 Self-adhesive rubber feetOwners ManualOnline Product Registration
Max Input Power |
150 watts
vs
125 watts
|
Handle more power from your amplifier |
Sensitivity |
89 dB
vs
88 dB
|
Play louder with same amount of amplification power |
Bi-Amping and Bi-Wiring |
Yes
vs
No
|
Allows bi-amping and bi-wiring connections |
Mounting Bracket |
Yes
vs
No
|
Allows mounting on walls |
Height |
374mm
vs
376mm
|
Easier to fit in smaller spaces |
Low Frequency Response |
39 Hz
vs
50 Hz
|
Generates deeper bass |
High Frequency Response |
40k Hz
vs
26k Hz
|
Generates higher frequency |
Base Surface Area |
756cm2 (216x350mm)
vs
762cm2 (214x355mm)
|
Takes less floor space |
General |
Polk Audio RTi A3 |
Polk Audio Signature S20 |
Brand |
Polk Audio |
Polk Audio |
Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
Power Range |
20-150 watts |
20-125 watts |
Sensitivity |
89 dB |
88 dB |
Impedance |
8 ohms |
8 ohms |
Frequency Response |
50-26k Hz |
39-40k Hz |
Drivers |
|
|
Woofer Quantity |
1 |
1 |
Woofer Size |
6.5" |
6.5" |
Woofer Composition |
Polymer composite |
Mica-reinforced polypropylene |
Woofer Surround Material |
Butyl rubber |
Butyl rubber |
Tweeter Size |
1" |
1" |
Tweeter Type |
Dome |
Soft-Dome |
Aimable Tweeter |
No |
No |
Midrange Driver |
No |
No |
Crossover Frequency |
2800Hz |
2500Hz |
Firing Direction |
back and front |
rear |
Physical Specs |
|
|
Height |
374.7mm (14.8") |
376.0mm (14.8") |
Width |
214.4mm (8.4") |
216.0mm (8.5") |
Depth |
355.6mm (14") |
350.0mm (13.8") |
Weight |
7.26kg (16lbs) |
7.73kg (17lbs) |
Enclosure |
Bass Reflex |
Bass Reflex |
Finish |
Real wood veneer |
Meddite MDF |
Available Colors |
Black, Cherry |
Black, Walnut, Brown Walnut |
Mounting Bracket |
Keyhole |
No |
Recommended Stand Height |
24-31" |
24-28" |
Grille |
n/a |
Yes |
Moisture Resistancy |
No |
No |
Connections |
|
|
Biamp Inputs |
Yes |
No |
Other |
|
|
Parts Warranty |
5 Years |
5 Years |
Labor Warranty |
5 Years |
5 Years |