In this review, we will be comparing XT60 and Emit M30, two Passive Floor-standing speakers from Polk Audio and Dynaudio.
Let's have a brief look at the main features
of Polk XT60 and Dynaudio Emit M30 first before getting into our more
detailed comparison.
Polk XT60 Key Specs
- 2-way Design
- 1" dome Tweeter
- 6.5" Bi-laminate paper Woofer
- 38-40k Hz Frequency Response
- 86 dB Sensitivity
- Impedance: 8ohms
- Power Range:25-200watts
- Weight:9.09kg
- Dimensions (H x W x D): 929.0" x 9-1/16" x 9-15/16"( 929.0 x 231.0 x 253.0mm )
Dynaudio Emit M30 Key Specs
- 2-way Design
- 1.1" Tweeter
- 2 x 6.6875" Magnesium Silicate Polymer Woofer
- 40-23k Hz Frequency Response
- 86 dB Sensitivity
- Impedance: 4ohms
- Power Range:up to 200watts
- Weight:18.18kg
- Dimensions (H x W x D): 961.0" x 8-1/16" x 11-5/8"( 961.0 x 205.0 x 296.0mm )
What size room are the Polk XT60 and Dynaudio Emit M30 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Polk XT60 |
Dynaudio Emit M30 |
| Near-field |
Bad |
Bad |
| Small Room |
Poor |
Poor |
| Mid-size Room |
Good |
Good |
| Large Room |
Good |
Good |
| Very Large Room |
Poor |
Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the Polk XT60 and Dynaudio Emit M30 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both XT60 and Emit M30 are 2-way speakers.
| Driver |
Polk XT60 |
Dynaudio Emit M30 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1.1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 6.5-inch
|
2 x 6.6875-inch
|
XT60 features a 1" Terylene dome Tweeter and 1 x 6.5" Bi-laminate paper Woofer . On the other hand, the Emit M30 features a 1.1" Tweeter and 2 x 6.6875" Magnesium Silicate Polymer Woofer .
Frequency Response
XT60 has a frequency range of 38-40k Hz whereas Emit M30 has a frequency range of 40-23k Hz. With a minimum frequency of 38Hz, the XT60 can go slightly deeper then the Emit M30's min frequency of 40Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
XT60 is a 8 ohms speaker compared to the Emit M30 which has a nominal impedance of 4 ohms. Lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit especially when played at high volume levels, so make sure the amp you pair with the Emit M30 can provide this impedance level.
On the other hand, they have the same sensitivity of 86 dBdB.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
XT60 features Binding post type posts and Emit M30 has a Binding post type posts. None of these speakers feature bi-amping/bi-wiring.
Dynaudio Emit M30's Binding post terminals
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Polk XT60's and Dynaudio Emit M30's external dimensions. Polk XT60 has external dimensions of 929.0 x 231.0 x 253.0mm ( 36-9/16 x 9-1/16 x 9-15/16inch) whereas Dynaudio Emit M30 has external dimensions of 961.0 x 205.0 x 296.0mm ( 37-13/16 x 8-1/16 x 11-5/8inch) .
Polk XT60 is 32mm shorter and 43mm less deeper than Dynaudio Emit M30 but it is also 26mm wider.
Below you can see the front view size comparison of Polk XT60 and Dynaudio Emit M30 in scale.
Comparison image of Polk XT60 and Dynaudio Emit M30 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Polk XT60 is approximately 584.4cm2 / 90.6inch2 and base area of the Dynaudio Emit M30 is approximately 606.8cm2 / 94.1inch2. The XT60 requires 4% less surface area than the Emit M30 which gives it a small advantage on placement in tight spaces.