In this review, we will be comparing Monitor XT35 and RP-400C, two Passive Center Channel speakers from Polk Audio and Klipsch. Let's have a brief look at the main features
of Polk XT35 and Klipsch RP-400C first before getting into our more
detailed comparison.
What size room are the Polk XT35 and Klipsch RP-400C speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Polk XT35 and Klipsch RP-400C compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Monitor XT35 and RP-400C are 2-way speakers.
| Driver |
Polk XT35 |
Klipsch RP-400C |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
4 x 3-inch
|
2 x 4-inch
|
Monitor XT35 features a 1" Terylene High-res dome Tweeter and 4 x 3" bi-laminate paper cone Woofer . On the other hand, the RP-400C features a 1" titanium Tractrix horn Tweeter and 2 x 4" Cerametallic cone Woofer .
Frequency Response
Monitor XT35 has a frequency range of 57-40k Hz whereas RP-400C has a frequency range of 65-25k Hz. With a minimum frequency of 57Hz, the Monitor XT35 can go significantly deeper on the low side and provide stronger bass compared to the RP-400C's min frequency of 65Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Center Channel class in our database.
Low Frequency
Center Channel Speakers
High Frequency
Center Channel Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Monitor XT35 and RP-400C have the same Impedance of 8 ohms but where they differ is the sensitivity levels. Monitor XT35 sensitivity is rated at 87 dB and the RP-400C's is at 95 dB. This 8 dB difference makes the Klipsch RP-400C a more sensitive speaker compared to Polk XT35, hence will play louder with the same amount of watts.
Sensitivity
Center Channel Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Monitor XT35 can handle a max power of 200 watts RMS from the amp the whereas RP-400C has a max power handling value of 75 watts RMS, 125 watts less than the Monitor XT35.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Monitor XT35 features Binding post type posts and RP-400C has a Binding post type posts. None of these speakers feature bi-amping/bi-wiring.
Polk XT35's 5-Way post terminals
Klipsch RP-400C's Binding post terminals
Cabinet Type and Port Position
Both Monitor XT35 and RP-400C have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Polk XT35's and Klipsch RP-400C's external dimensions. Polk XT35 has external dimensions of 107.0 x 621.0 x 142.0mm ( 4-3/16 x 24-7/16 x 5-9/16inch) whereas Klipsch RP-400C has external dimensions of 147.0 x 408.0 x 242.0mm ( 5-3/4 x 16-1/16 x 9-1/2inch) .
Polk XT35 is 40mm shorter and 100mm less deeper than Klipsch RP-400C but it is also 213mm wider.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Polk XT35 is approximately 881.8cm2 / 136.7inch2 and base area of the Klipsch RP-400C is approximately 987.4cm2 / 153.0inch2. The Monitor XT35 requires 11% less surface area than the RP-400C which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Polk XT35 weighs 6.36kg / 14lbs and the Klipsch RP-400C weighs 6.36kg / 14lbs.
Here is a comparison of how Monitor XT35 and RP-400C's weights compare with the average, max and min weights in Passive Center Channel class.
Weight
All Center Channel Speakers
What's in the Box of Polk XT35?
Here are the items that are included inside the box of Monitor XT35:
Center-channel loudspeakerGrille (attached)4 Self-adhesive rubber feetOwners ManualOnline Product RegistrationWall-Mount Template
What's in the Box of Klipsch RP-400C?
Here are the items that come with the RP-400C:
Center channel loudspeakerGrille (installed)4 Self-adhesive rubber feetTilt rod (attached nut)User ManualImportant Safety InstructionsWarranty Information
 Max Input Power |
200 watts
vs
75 watts
|
Handle more power from your amplifier |
 Number of Woofers |
4
vs
2
|
More woofers |
| Low Frequency Response |
57 Hz
vs
65 Hz
|
Generates deeper bass |
 High Frequency Response |
40k Hz
vs
25k Hz
|
Generates higher frequency |
 Height |
107mm
vs
147mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
881cm2 (621x142mm)
vs
987cm2 (408x242mm)
|
Takes less floor space |
 Price per pair* |
299USD
vs
344USD
|
costs less (*prices may change depending on the seller, location and time) |
 Sensitivity |
95 dB
vs
87 dB
|
Play louder with same amount of amplification power |
| Woofer Size |
4 inches
vs
3 inches
|
Larger woofer |
| General |
Polk Audio Monitor XT35 |
Klipsch Reference Premiere RP-400C |
| Brand |
Polk Audio |
Klipsch |
| Speaker Type |
Low-profile center channel speaker |
Center channel speaker |
| Power Range |
25-200 watts |
up to 75 watts |
| Sensitivity |
87 dB |
95 dB |
| Impedance |
8 ohms |
8 ohms |
| Frequency Response |
57-40k Hz |
65-25k Hz |
Drivers |
|
|
| Woofer Quantity |
4 |
2 |
| Woofer Size |
3" |
4" |
| Woofer Composition |
bi-laminate paper cone |
Cerametallic cone |
| Woofer Surround Material |
n/a |
Rubber |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
High-res dome |
Tractrix horn |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
N/A" |
No |
| Firing Direction |
rear |
rear |
Physical Specs |
|
|
| Height |
107.0mm (4.2") |
147.0mm (5.8") |
| Width |
621.0mm (24.4") |
408.0mm (16.1") |
| Depth |
142.0mm (5.6") |
242.0mm (9.5") |
| Weight |
6.36kg (14lbs) |
6.36kg (14lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
n/a |
MDF/Wood-grain vinyl |
| Available Colors |
Black |
Walnut, Black |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |