In this review, we will be comparing XT15 and S10, two Passive Bookshelf speakers by Polk Audio
Let's have a brief look at the main features
of Polk XT15 and Polk S10 first before getting into our more
detailed comparison.
Polk XT15 Key Specs
- 2-way Design
- 1" Soft-Dome Tweeter
- 5.25" Bi-laminate paper Woofer
- 48-40k Hz Frequency Response
- 86 dB Sensitivity
- Impedance: 8ohms
- Power Range:30-150watts
- Weight:4.09kg
- Dimensions (H x W x D): 270.0" x 6-9/16" x 7-3/16"( 270.0 x 167.0 x 183.0mm )
Polk S10 Key Specs
- 2-way Design
- 1" Soft-Dome Tweeter
- 4" Mica-reinforced polypropylene Woofer
- 67-40k Hz Frequency Response
- 87 dB Sensitivity
- Impedance: 8ohms
- Power Range:20-100watts
- Weight:2.73kg
- Dimensions (H x W x D): 214.0" x 5.0" x 6.1"( 214.0 x 127.0 x 155.0mm )
What size room are the Polk XT15 and Polk S10 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Polk XT15 |
Polk S10 |
| Near-field |
Poor |
Average |
| Small Room |
Average |
Good |
| Mid-size Room |
Good |
Average |
| Large Room |
Average |
Poor |
| Very Large Room |
Poor |
Bad |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the Polk XT15 and Polk S10 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both XT15 and S10 are 2-way speakers.
| Driver |
Polk XT15 |
Polk S10 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 5.25-inch
|
1 x 4-inch
|
XT15 features a 1" Soft-Dome Tweeter and 1 x 5.25" Bi-laminate paper Woofer . On the other hand, the S10 features a 1" Terylene Soft-Dome Tweeter and 1 x 4" Mica-reinforced polypropylene Woofer with a Crossover frequency at 2500Hz.
Frequency Response
XT15 has a frequency range of 48-40k Hz whereas S10 has a frequency range of 67-40k Hz. With a minimum frequency of 48Hz, the XT15 can go significantly deeper on the low side and provide stronger bass compared to the S10's min frequency of 67Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
XT15 and S10 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. XT15 sensitivity is rated at 86 dB and the S10's is at 87 dB. This 1 dB difference makes the Polk S10 a more sensitive speaker compared to Polk XT15, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
XT15 can handle a max power of 150 watts RMS from the amp the whereas S10 has a max power handling value of 100 watts RMS, 50 watts less than the XT15.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
XT15 features 5-way post type posts and S10 has a 5-way post type posts. None of these speakers feature bi-amping/bi-wiring.
Polk S10's 5-way post terminals
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Polk XT15's and Polk S10's external dimensions. Polk XT15 has external dimensions of 270.0 x 167.0 x 183.0mm ( 10-5/8 x 6-9/16 x 7-3/16inch) whereas Polk S10 has external dimensions of 214.0 x 127.0 x 155.0mm ( 8.4 x 5.0 x 6.1inch) .
Polk XT15 is clearly the larger of the two speakers. Its body is 40mm wider, 56mm taller and 28mm deeper than Polk S10.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Polk XT15 is approximately 305.6cm2 / 47.4inch2 and base area of the Polk S10 is approximately 196.9cm2 / 30.5inch2. The XT15 requires 55% more surface area than the S10 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Polk XT15 weighs 4.09kg / 9lbs and the Polk S10 weighs 2.73kg / 6lbs. This makes the XT15 50% heavier than the S10.
Here is a comparison of how XT15 and S10's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Polk XT15?
Here are the items that are included inside the box of XT15:
2 Bookshelf loudspeakers2 Grilles (attached)8 Self-adhesive rubber feetOwners ManualOnline Product Registration
What's in the Box of Polk S10?
Here are the items that come with the S10:
2 Bookshelf loudspeakers2 Grille (attached)8 Self-adhesive rubber feetWall-mount templateOwners ManualOnline Product Registration
 Max Input Power |
150 watts
vs
100 watts
|
Handle more power from your amplifier |
 Woofer Size |
5.25 inches
vs
4 inches
|
Larger woofer |
|
Low Frequency Response |
48 Hz
vs
67 Hz
|
Generates deeper bass |
 Sensitivity |
87 dB
vs
86 dB
|
Play louder with same amount of amplification power |
 Mounting Bracket |
Yes
vs
No
|
Allows mounting on walls |
 Height |
214mm
vs
270mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
196cm2
vs
305cm2
|
Takes less floor space |
| General |
Polk Audio Monitor XT15 |
Polk Audio Signature S10 |
| Brand |
Polk Audio |
Polk Audio |
| Speaker Type |
Bookshelf speakers |
Satellite speakers |
| Power Range |
30-150 watts |
20-100 watts |
| Sensitivity |
86 dB |
87 dB |
| Impedance |
8 ohms |
8 ohms |
| Frequency Response |
48-40k Hz |
67-40k Hz |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
5.25" |
4" |
| Woofer Composition |
Bi-laminate paper |
Mica-reinforced polypropylene |
| Woofer Surround Material |
Rubber |
Butyl rubber |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
Soft-Dome |
Soft-Dome |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
n/a |
2500Hz |
| Firing Direction |
n/a |
rear |
Physical Specs |
|
|
| Height |
270.0mm (10.6") |
214.0mm (8.4") |
| Width |
167.0mm (6.6") |
127.0mm (5") |
| Depth |
183.0mm (7.2") |
155.0mm (6.1") |
| Weight |
4.09kg (9lbs) |
2.73kg (6lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
MDF, Vinyl |
Meddite MDF |
| Available Colors |
Black |
Black |
| Mounting Bracket |
No |
Keyhole |
| Recommended Stand Height |
28-32" |
28-31" |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
No |
No |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |