In this review, we will be comparing Synchrony T600 and L600, two Passive Floor-standing speakers from PSB and Polk Audio.
Let's have a brief look at the main features
of PSB Synchrony T600 and Polk L600 first before getting into our more
detailed comparison.
PSB Synchrony T600 Key Specs
- 3-way Design
- 1" Dome Tweeter
- 5.25" Midrange
- 3 x 6.5" Carbon fiber Woofer
- 24-23k Hz Frequency Response
- 89 dB Sensitivity
- Impedance: 4ohms
- Power Range:20-300watts
- Weight:34.90kg
- Dimensions (H x W x D): 1048.0" x 9" x 13-1/2"( 1048.0 x 228.0 x 343.0mm )
Polk L600 Key Specs
- 3-way Design
- 1" Pinnacle Ring Radiator Tweeter
- 5.25" Midrange
- 2 x 7" Polypropylene Woofer
- 5.25" Midrange
- 34-38k Hz Frequency Response
- 86 dB Sensitivity
- Impedance: 4ohms
- Power Range:30-300watts
- Weight:35.30kg
- Dimensions (H x W x D): 1182.0" x 13" x 16-3/4"( 1182.0 x 331.0 x 426.0mm )
What size room are the PSB Synchrony T600 and Polk L600 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
PSB Synchrony T600 |
Polk L600 |
| Near-field |
Bad |
Bad |
| Small Room |
Poor |
Poor |
| Mid-size Room |
Average |
Average |
| Large Room |
Good |
Good |
| Very Large Room |
Average |
Average |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the PSB Synchrony T600 and Polk L600 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Synchrony T600 and L600 are 3-way speakers.
| Driver |
PSB Synchrony T600 |
Polk L600 |
|
Driver Setup
|
3-way
|
3-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
1 x 5.25-inch |
1 x 5.25-inch |
|
Woofer
|
3 x 6.5-inch
|
2 x 7-inch
|
Synchrony T600 features a 1" titanium with ferrofluid cooling and neodymium magnet Dome Tweeter , a 5.25" Midrange and 3 x 6.5" Carbon fiber Woofer with a Crossover frequency at 450Hz and 1800Hz. On the other hand, the L600 features a 1" Pinnacle Ring Radiator Tweeter , a 5.25" Midrange and 2 x 7" Polypropylene Woofer with a Crossover frequency at 410Hz and 2900Hz.
Frequency Response
Synchrony T600 has a frequency range of 24-23k Hz whereas L600 has a frequency range of 34-38k Hz. With a minimum frequency of 24Hz, the Synchrony T600 can go significantly deeper on the low side and provide stronger bass compared to the L600's min frequency of 34Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Synchrony T600 and L600 have the same Impedance of 4 ohms but where they differ is the sensitivity levels. Synchrony T600 sensitivity is rated at 89 dB and the L600's is at 86 dB. This 3 dB difference makes the PSB Synchrony T600 a more sensitive speaker compared to Polk L600, hence will play louder with the same amount of watts.
One thing to keep in mind that the lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit comared to higher impedance speakers especially at high volume levels, so make sure the amp you pair with the Synchrony T600 and the Synchrony T600 can provide this impedance level.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Both Synchrony T600 and L600 features dual binding post speaker terminals for bi-amping or bi-wiring.
PSB Synchrony T600's Binding post terminals allows Bi-amping or bi-wiring
Polk L600's Binding post terminals allows Bi-amping or bi-wiring
Cabinet Type and Port Position
Synchrony T600 has a rear firing port whereas L600 has a down firing ports.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare PSB Synchrony T600's and Polk L600's external dimensions. PSB Synchrony T600 has external dimensions of 1048.0 x 228.0 x 343.0mm ( 41-1/4 x 9 x 13-1/2inch) whereas Polk L600 has external dimensions of 1182.0 x 331.0 x 426.0mm ( 46-1/2 x 13 x 16-3/4inch) .
Polk L600 is clearly the larger of the two speakers. Its body is 103mm wider, 134mm taller and 83mm deeper than PSB Synchrony T600.
Below you can see the front view size comparison of PSB Synchrony T600 and Polk L600 in scale.
Comparison image of PSB Synchrony T600 and Polk L600 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the PSB Synchrony T600 is approximately 782.0cm2 / 121.2inch2 and base area of the Polk L600 is approximately 1410.1cm2 / 218.6inch2. The Synchrony T600 requires 45% less surface area than the L600 which gives it a small advantage on placement in tight spaces.