In this review, we will be comparing Synchrony B600 and BW 606, two Passive Bookshelf speakers from PSB and Bowers Wilkins. Let's have a brief look at the main features
of PSB Synchrony B600 and B&W 606 first before getting into our more
detailed comparison.
What size room are the PSB Synchrony B600 and B&W 606 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the PSB Synchrony B600 and B&W 606 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Synchrony B600 and BW 606 are 2-way speakers.
| Driver |
PSB Synchrony B600 |
B&W 606 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 6.5-inch
|
1 x 6.5-inch
|
Synchrony B600 features a 1" Hard-Dome Tweeter and 1 x 6.5" Carbon fiber Woofer with a Crossover frequency at 2200Hz. On the other hand, the BW 606 features a 1" Decoupled Carbon Hard-Dome Tweeter and 1 x 6.5" Continuum Woofer .
Frequency Response
Synchrony B600 has a frequency range of 55-20k Hz whereas BW 606 has a frequency range of 52-28k Hz. With a minimum frequency of 52Hz, the BW 606 can go slightly deeper then the Synchrony B600's min frequency of 55Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Synchrony B600 is a 6 ohms speaker compared to the BW 606 which has a nominal impedance of 8 ohms.
On the other hand, they have the same sensitivity of 88 dBdB.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Synchrony B600 can handle a max power of 150 watts RMS from the amp the whereas BW 606 has a max power handling value of 120 watts RMS, 30 watts less than the Synchrony B600.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Both Synchrony B600 and BW 606 features dual binding post speaker terminals for bi-amping or bi-wiring.
PSB Synchrony B600's Binding post terminals allows Bi-amping or bi-wiring
B&W 606's Post terminals allows Bi-amping or bi-wiring
Cabinet Type and Port Position
Both Synchrony B600 and BW 606 have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare PSB Synchrony B600's and B&W 606's external dimensions. PSB Synchrony B600 has external dimensions of 402.0 x 232.0 x 345.0mm ( 15-13/16 x 9-1/8 x 13-9/16inch) whereas B&W 606 has external dimensions of 345.0 x 190.0 x 324.0mm ( 13.5 x 7.4 x 12.7inch) .
PSB Synchrony B600 is clearly the larger of the two speakers. Its body is 42mm wider, 57mm taller and 21mm deeper than B&W 606.
Below you can see the front view size comparison of PSB Synchrony B600 and B&W 606 in scale.
Comparison image of PSB Synchrony B600 and B&W 606 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the PSB Synchrony B600 is approximately 800.4cm2 / 124.1inch2 and base area of the B&W 606 is approximately 615.6cm2 / 95.4inch2. The Synchrony B600 requires 30% more surface area than the BW 606 which gives it a small disadvantage on placement in tight spaces.
Here is an another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:
Size Comparison image of PSB Synchrony B600 and B&W 606 on a Media Console
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The PSB Synchrony B600 weighs 10.45kg / 23lbs and the B&W 606 weighs 6.90kg / 15.2lbs. This makes the Synchrony B600 51% heavier than the BW 606.
Here is a comparison of how Synchrony B600 and BW 606's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of PSB Synchrony B600?
Here are the items that are included inside the box of Synchrony B600:
Bookshelf loudspeakrGrille2 Binding-post jumpers (pre-installed)Owners ManualWarranty Card
What's in the Box of B&W 606?
Here are the items that come with the BW 606:
2 Bookshelf loudspeakers2 Grilles2 Two-piece foam port plugs8 Self-adhesive rubber feet4 Jumper-straps (pre-installed)ManualBowers & Wilkins brochureWarranty Information
 Max Input Power |
150 watts
vs
120 watts
|
Handle more power from your amplifier |
 Minimum Impedance |
4 ohms
vs
3.7 ohms
|
Very low impedance levels puts more pressure on amplifier |
 Nominal Impedance |
8 ohms
vs
6 ohms
|
Less selective with amplifiers |
 Low Frequency Response |
52 Hz
vs
55 Hz
|
Generates deeper bass |
 High Frequency Response |
28k Hz
vs
20k Hz
|
Generates higher frequency |
 Height |
345mm
vs
402mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
615cm2 (190x324mm)
vs
800cm2 (232x345mm)
|
Takes less floor space |
 Price per pair* |
899USD
vs
2500USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
PSB Synchrony B600 |
Bowers & Wilkins 606 |
| Brand |
PSB |
Bowers Wilkins |
| Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
| Power Range |
15-150 watts |
30-120 watts |
| Sensitivity |
88 dB |
88 dB |
| Impedance |
6 ohms |
8 ohms |
| Impedance |
4 ohms |
3.7 ohms |
| Frequency Response |
55-20k Hz |
52-28k Hz |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
6.5" |
6.5" |
| Woofer Composition |
Carbon fiber |
Continuum |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
Hard-Dome |
Hard-Dome |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
2200Hz |
n/a |
| Firing Direction |
rear |
rear |
| Suggested Break-in Period |
n/a |
allow up to a week for the temperature effects to stabilise and 15 hours of average use for the parts to attain their intended design characteristics. |
Physical Specs |
|
|
| Height |
402.0mm (15.8") |
345.0mm (13.6") |
| Width |
232.0mm (9.1") |
190.0mm (7.5") |
| Depth |
345.0mm (13.6") |
324.0mm (12.8") |
| Weight |
10.45kg (23lbs) |
6.90kg (15.2lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
MDF/Lacquer |
MDF/Vinyl |
| Available Colors |
Gloss Black, Satin Walnut |
Black, White, Oak |
| Mounting Bracket |
No |
No |
| Recommended Stand Height |
24-26" |
24-26" |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
Yes |
Yes |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |