SpeakerDecision
  • SPEAKERS by TYPE
    • Passive Bookshelf Speakers
    • Passive Floor-standing Speakers
    • Passive Center Channel Speakers
    • Passive In-wall Speakers
    • All Passive Speakers
    • Powered Subwoofers
    • Powered Stereo Speakers
  • AMPLIFIERS
  • SMART FIND

Monitor Audio W280-IDC vs Definitive UIW RLS III Comparison

x
Speaker to replace
Change

Monitor Audio W280-IDC

Passive In-wall | 45-30kHz

Monitor Audio W280-IDC
CHECK PRICE
Change
    
Definitive UIW RLS III

Passive In-wall | 24-30kHz

Definitive Technology UIW RLS III
CHECK PRICE
Monitor Audio W280-IDC Monitor Audio W280-I...
See at AMAZON
Definitive UIW RLS III Definitive UIW RLS I...
See at AMAZON
Monitor Audio W280-I...
See at AMAZON
Definitive UIW RLS I...
See at AMAZON
Monitor Audio W280-IDC vs Definitive UIW RLS III Speaker Comparison

In this review, we will be comparing W280-IDC and UIW RLS III, two Passive In-wall speakers from Monitor Audio and Definitive Technology.

Let's have a brief look at the main features of Monitor Audio W280-IDC and Definitive UIW RLS III first before getting into our more detailed comparison.

Monitor Audio W280-IDC Key Specs

  • 3-way Design
  • 1" Hard-Dome Tweeter
  • 4" Midrange
  • 8" C-CAM Woofer
  • 45-30kHz Frequency Response
  • 90 dB Sensitivity
  • Impedance: 6ohms
  • Power Range:30-120watts
  • Dimensions (H x W x D): 388.0" x 9.1875" x 3.6875"( 388.0 x 234.0 x 94.0mm )

Definitive UIW RLS III Key Specs

  • 2-way Design
  • 1" Hard-Dome Tweeter
  • 2 x 5.25" Polypropylene Woofer
  • 24-30kHz Frequency Response
  • 92 dB Sensitivity
  • Impedance: 8ohms
  • Power Range:10-325watts
  • Dimensions (H x W x D): 604.0" x 5.8750" x 3.8750"( 604.0 x 150.0 x 99.0mm )

What size room are the Monitor Audio W280-IDC and Definitive UIW RLS III speakers good for?

The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:

Listening Environment* Monitor Audio W280-IDC Definitive UIW RLS III
Near-field Poor Are you nuts?
Small Room Average Bad
Mid-size Room Good Poor
Large Room Average Good
Very Large Room Poor Good

(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2. Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)

In the following sections, we will get into more detail in order to better understand how the Monitor Audio W280-IDC and Definitive UIW RLS III compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.


**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.


Drivers

One of the fundamental differences between these two speakers is that W280-IDC is a 3-way design whereas the UIW RLS III is a 2-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.

Driver Monitor Audio W280-IDC Definitive UIW RLS III
Driver Setup 3-way 2-way
Tweeter 1-inch 1-inch
Midrange 1 x 4-inch -
Woofer 1 x 8-inch 2 x 5.25-inch

W280-IDC features a 1" Hard-Dome Tweeter , a 4" Midrange and 1 x 8" C-CAM Woofer . On the other hand, the UIW RLS III features a 1" Hard-Dome Tweeter and 2 x 5.25" Polypropylene Woofer .

Frequency Response

W280-IDC has a frequency range of 45-30kHz whereas UIW RLS III has a frequency range of 24-30kHz. With a minimum frequency of 24Hz, the UIW RLS III can go significantly deeper on the low side and provide stronger bass compared to the W280-IDC's min frequency of 45Hz.

Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the In-wall class in our database.

Low Frequency

In-wall Speakers

W280-IDC
UIW RLS III
Min
Average
Max
High Frequency

In-wall Speakers

Monitor Audio W280-IDC
Definitive UIW RLS III
Min
Average
Max

None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.

Impedance and Sensitivity

W280-IDC is a 6 ohms speaker compared to the UIW RLS III which has a nominal impedance of 8 ohms.

These two speakers also have different sensitivity levels. W280-IDC sensitivity is rated at 90 dB and the UIW RLS III's is rated at 92 dB. This 2 dB difference makes the Definitive UIW RLS III a more sensitive speaker compared to Monitor Audio W280-IDC, hence will play louder with the same amount of watts.

Sensitivity

In-wall Speakers

W280-IDC
UIW RLS III
Min
Average
Max

Power Range

Power range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.

W280-IDC can handle a max power of 325 watts RMS from the amp the whereas W280-IDC has a max power handling value of 120 watts RMS , 205 watts less than the UIW RLS III.

Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters such as Impedance, sensitivity and system efficiencies.

Input Type and Bi-Amping / Bi-Wiring

W280-IDC features Spring post type posts and UIW RLS III has a Spring post type posts. None of these speakers feature bi-amping/bi-wiring.

Physical Specs

Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Monitor Audio W280-IDC's and Definitive UIW RLS III's external dimensions. Monitor Audio W280-IDC has external dimensions of 388.0 x 234.0 x 94.0mm ( 15.2500-inch x 9.1875-inch x 3.6875-inch) whereas Definitive UIW RLS III has external dimensions of 604.0 x 150.0 x 99.0mm ( 23.7500-inch x 5.8750-inch x 3.8750-inch) .

Monitor Audio W280-IDC is 216mm shorter and 5mm less deeper than Definitive UIW RLS III but it is also 84mm wider.

What's in the Box of Monitor Audio W280-IDC?

Here are the items that are included inside the box of W280-IDC:
  • In-Wall speaker
  • Grille
  • Paint skim
  • Installation Guide
  • Important Safety Instructions
  • Cutout Template
  • What's in the Box of Definitive UIW RLS III?

    Here are the items that come with the UIW RLS III:
  • In-wall loudspeaker
  • Grille
  • Self-adhesive foam gasket
  • Paint mask
  • Wall-Mount Template
  • Owners Manual
  • Online Product Registration Card

  • Reasons to choose Monitor Audio W280-IDC over Definitive Technology UIW RLS III
    Driver Setup 3-way vs 2-way Have a dedicated mid-range driver
    Woofer Size 8 inches vs 5.25 inches Larger woofer
    Height 388mm vs 604mm Easier to fit in smaller spaces
    Price per pair* 1300USD vs 1398USD costs less (*prices may change depending on the seller, location and time)

    Reasons to choose Definitive Technology UIW RLS III over Monitor Audio W280-IDC

    Max Input Power 325 watts vs 120 watts Handle more power from your amplifier
    Sensitivity 92 dB vs 90 dB Play louder with same amount of amplification power
    Nominal Impedance 8 ohms vs 6 ohms Less selective with amplifiers
    Number of Woofers 2 vs 1 More woofers
    Low Frequency Response 24 Hz vs 45 Hz Generates deeper bass
    Passive Radiator 2 x 5.25-inch vs None Increases the bass performance
    Base Surface Area 148cm2 vs 220cm2 Takes less floor space
    Monitor Audio W280-IDC vs Definitive UIW RLS III Specs Table
    Detailed comparison of specifications
    General Monitor Audio W280-IDC Definitive Technology UIW RLS III
    Brand Monitor Audio Definitive Technology
    Speaker Type Passive In-wall Speaker Passive In-wall Speaker
    Power Range 30-120 watts 10-325 watts
    Sensitivity 90 dB 92 dB
    Impedance 6 ohms 8 ohms
    Frequency Response 45-30kHz 24-30kHz
    Drivers
    Woofer Quantity 1 2
    Woofer Size 8" 5.25"
    Woofer Composition C-CAM Polypropylene
    Woofer Surround Material Rubber Butyl Rubber
    Tweeter Size 1" 1"
    Tweeter Type Hard-Dome Hard-Dome
    Aimable Tweeter Yes No
    Midrange Driver 4" N/A"
    Physical Specs
    Height 388.0mm (15.3") 604.0mm (23.8")
    Width 234.0mm (9.2") 150.0mm (5.9")
    Depth 94.0mm (3.7") 99.0mm (3.9")
    Enclosure In-wall In-wall
    Moisture Resistancy Yes Yes
    Connections
    Biamp Inputs No No
    Other
    Parts Warranty Lifetime 5 Years
    Labor Warranty Lifetime 5 Years

    Most Popular Speakers
    Klipsch Reference R-51M
    Klipsch R-51M
    2-way | 93 dB | 8 ohms
    Wharfedale Elysian 2
    Wharfedale Elysian 2
    3-way | 89 dB | 4 ohms
    ELAC Debut 2.0 B6.2
    ELAC Debut 2.0 B6.2
    2-way | 87 dB | 6 ohms
    Bowers & Wilkins 606 S2 Anniversary Edition
    B&W 606 S2
    2-way | 88 dB | 8 ohms
    KEF Q150
    KEF Q150
    2-way | 86 dB | 8 ohms
    Klipsch Reference Premiere RP-500M
    Klipsch RP-500M
    2-way | 93 dB | 8 ohms
    Wharfedale EVO4.1
    Wharfedale EVO4.1
    2-way | 87 dB | 8 ohms
    Bowers & Wilkins 606
    B&W 606
    2-way | 88 dB | 8 ohms
    Copyright © 2025 by SpeakerDecision
    About Privacy Contact US Camera Decision

    Report a Correction