In this review, we will be comparing W250-LCR and 265-LS, two Passive In-wall speakers from Monitor Audio and Polk Audio. Let's have a brief look at the main features
of Monitor Audio W250-LCR and Polk Audio 265-LS first before getting into our more
detailed comparison.
What size room are the Monitor Audio W250-LCR and Polk Audio 265-LS speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Monitor Audio W250-LCR and Polk Audio 265-LS compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
One of the fundamental differences between these two speakers is that W250-LCR is a 2-way design whereas the 265-LS is a 3-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
| Driver |
Monitor Audio W250-LCR |
Polk Audio 265-LS |
|
Driver Setup
|
2-way
|
3-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
1 x 6.5-inch |
|
Woofer
|
2 x 5-inch
|
1 x 6.5-inch
|
W250-LCR features a 1" Hard-Dome Tweeter and 2 x 5" Metal Matrix Polymer Woofer . On the other hand, the 265-LS features a 1" Ring Radiator Tweeter , a 6.5" Midrange and 1 x 6.5" Aerated polypropylene Woofer .
Frequency Response
W250-LCR has a frequency range of 60-30kHz whereas 265-LS has a frequency range of 28-33kHz. With a minimum frequency of 28Hz, the 265-LS can go significantly deeper on the low side and provide stronger bass compared to the W250-LCR's min frequency of 60Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the In-wall class in our database.
Low Frequency
In-wall Speakers
High Frequency
In-wall Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
W250-LCR and 265-LS have the same Impedance of 8 ohms but where they differ is the sensitivity levels. W250-LCR sensitivity is rated at 88 dB and the 265-LS's is at 91 dB. This 3 dB difference makes the Polk Audio 265-LS a more sensitive speaker compared to Monitor Audio W250-LCR, hence will play louder with the same amount of watts.
Sensitivity
In-wall Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
W250-LCR can handle a max power of 200 watts RMS from the amp the whereas W250-LCR has a max power handling value of 100 watts RMS , 100 watts less than the 265-LS.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
W250-LCR features Spring post type posts and 265-LS has a Spring post type posts. None of these speakers feature bi-amping/bi-wiring.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Monitor Audio W250-LCR's and Polk Audio 265-LS's external dimensions. Monitor Audio W250-LCR has external dimensions of 353.0 x 147.0 x 102.0mm ( 13.8750-inch x 5.7500-inch x 4.0000-inch) whereas Polk Audio 265-LS has external dimensions of ( 19.1875-inch x 7.2500-inch x 0.0000-inch) .
Monitor Audio W250-LCR is 38mm narrower and 135mm shorter than Polk Audio 265-LS but it is also 102mm deeper.
What's in the Box of Monitor Audio W250-LCR?
Here are the items that are included inside the box of W250-LCR:
In-wall speakerGrillePaint skimInstallation GuideImportant Safety InstructionsCutout Template
What's in the Box of Polk Audio 265-LS?
Here are the items that come with the 265-LS:
In-wall loudspeakerWhite metal grillePower Port plugMounting templateOwners Manual