In this review, we will be comparing Silver 200 7G and R700, two Passive Floor-standing speakers from Monitor Audio and Polk Audio.
Let's have a brief look at the main features
of Monitor Audio Silver 200 7G and Polk R700 first before getting into our more
detailed comparison.
Monitor Audio Silver 200 7G Key Specs
- 2-way Design
- 1" gold dome C-CAM with uniform dispersion (UD) waveguide Tweeter
- 2 x 5.25" C-CAM RST II Woofer
- 34-35k Hz Frequency Response
- 87.5 dB Sensitivity
- Impedance: 8ohms
- Power Range:60-150watts
- Weight:13.77kg
- Dimensions (H x W x D): 920.0" x 9-15/16" x 13-1/16"( 920.0 x 253.0 x 332.0mm )
Polk R700 Key Specs
- 3-way Design
- 1" Pinnacle Ring Radiator Tweeter
- 6.5" Midrange
- 2 x 8" Polypropylene Woofer
- 6.5" Midrange
- 38-38k Hz Frequency Response
- 88 dB Sensitivity
- Impedance: 8ohms
- Power Range:50-300watts
- Weight:35.90kg
- Dimensions (H x W x D): 1143.8" x 12.6" x 16.9"( 1143.8 x 320.7 x 428.3mm )
What size room are the Monitor Audio Silver 200 7G and Polk R700 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Monitor Audio Silver 200 7G |
Polk R700 |
| Near-field |
Bad |
Bad |
| Small Room |
Poor |
Poor |
| Mid-size Room |
Good |
Average |
| Large Room |
Good |
Good |
| Very Large Room |
Poor |
Average |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the Monitor Audio Silver 200 7G and Polk R700 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
One of the fundamental differences between these two speakers is that Silver 200 7G is a 2-way design whereas the R700 is a 3-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
| Driver |
Monitor Audio Silver 200 7G |
Polk R700 |
|
Driver Setup
|
2-way
|
3-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
1 x 6.5-inch |
|
Woofer
|
2 x 5.25-inch
|
2 x 8-inch
|
Silver 200 7G features a 1" gold dome C-CAM with uniform dispersion (UD) waveguide Tweeter and 2 x 5.25" C-CAM RST II Woofer . On the other hand, the R700 features a 1" Pinnacle Ring Radiator Tweeter , a 6.5" Midrange and 2 x 8" Polypropylene Woofer with a Crossover frequency at 350Hz and 2700Hz.
Frequency Response
Silver 200 7G has a frequency range of 34-35k Hz whereas R700 has a frequency range of 38-38k Hz. With a minimum frequency of 34Hz, the Silver 200 7G can go slightly deeper then the R700's min frequency of 38Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
Monitor Audio Silver 200 7G
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Silver 200 7G and R700 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. Silver 200 7G sensitivity is rated at 87.5 dB and the R700's is at 88 dB.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
Silver 200 7G can handle a max power of 300 watts RMS from the amp the whereas Silver 200 7G has a max power handling value of 150 watts RMS , 150 watts less than the R700.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Both Silver 200 7G and R700 features dual binding post speaker terminals for bi-amping or bi-wiring.
Polk R700's Post terminals allows Bi-amping or bi-wiring
Polk R700 Port
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Monitor Audio Silver 200 7G's and Polk R700's external dimensions. Monitor Audio Silver 200 7G has external dimensions of 920.0 x 253.0 x 332.0mm ( 36-3/16 x 9-15/16 x 13-1/16inch) whereas Polk R700 has external dimensions of 1143.8 x 320.7 x 428.3mm ( 45 x 12.6 x 16.9inch) .
Polk R700 is clearly the larger of the two speakers. Its body is 67.7mm wider, 223.8mm taller and 96.3mm deeper than Monitor Audio Silver 200 7G.
Below you can see the front view size comparison of Monitor Audio Silver 200 7G and Polk R700 in scale.
Comparison image of Monitor Audio Silver 200 7G and Polk R700 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Monitor Audio Silver 200 7G is approximately 840.0cm2 / 130.2inch2 and base area of the Polk R700 is approximately 1373.6cm2 / 212.9inch2. The Silver 200 7G requires 39% less surface area than the R700 which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Monitor Audio Silver 200 7G weighs 13.77kg / 30.3lbs and the Polk R700 weighs 35.90kg / 79lbs. This makes the R700 161% heavier than the Silver 200 7G.
Here is a comparison of how Silver 200 7G and R700's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
Monitor Audio Silver 200 7G
What's in the Box of Monitor Audio Silver 200 7G?
Here are the items that are included inside the box of Silver 200 7G:
Floorstanding loudspeakerGrille4 Outrigger feet4 Rubber feet (pre-installed on outrigger feet)4 Spikes4 Bolts4 Machine screws2 Foam port plugs2 Hex-keysOwners ManualImportant Safety Instructions
What's in the Box of Polk R700?
Here are the items that come with the R700:
Floorstanding loudspeaker
4 Outrigger feet (pre-installed)
4 Rubber feet (pre-installed)
4 Spike feet (pre-installed)
Grille
Hex-key
Owner's Manual
Online Registration
 Low Frequency Response |
34 Hz
vs
38 Hz
|
Generates deeper bass |
 Height |
920mm
vs
1143mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
840cm2
vs
1373cm2
|
Takes less floor space |
 Price per pair* |
2100USD
vs
2198USD
|
costs less (*prices may change depending on the seller, location and time) |
 Max Input Power |
300 watts
vs
150 watts
|
Handle more power from your amplifier |
 Driver Setup |
3-way
vs
2-way
|
Have a dedicated mid-range driver |
|
Woofer Size |
8 inches
vs
5.25 inches
|
Larger woofer |
 High Frequency Response |
38k Hz
vs
35k Hz
|
Generates higher frequency |
| General |
Monitor Audio Silver 200 7G |
Polk Audio Reserve R700 |
| Brand |
Monitor Audio |
Polk Audio |
| Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
| Power Range |
60-150 watts |
50-300 watts |
| Sensitivity |
87.5 dB |
88 dB |
| Impedance |
8 ohms |
8 ohms |
| Impedance |
n/a |
3.6 ohms |
| Frequency Response |
34-35k Hz |
38-38k Hz |
Drivers |
|
|
| Woofer Quantity |
2 |
2 |
| Woofer Size |
5.25" |
8" |
| Woofer Composition |
C-CAM RST II |
Polypropylene |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
gold dome C-CAM with uniform dispersion (UD) waveguide |
Pinnacle Ring Radiator |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
6.5" |
| Crossover Frequency |
n/a |
350Hz and 2700Hz |
| Firing Direction |
n/a |
bottom |
Physical Specs |
|
|
| Height |
920.0mm (36.2") |
1143.8mm (45") |
| Width |
253.0mm (10") |
320.7mm (12.6") |
| Depth |
332.0mm (13.1") |
428.3mm (16.9") |
| Weight |
13.77kg (30.3lbs) |
35.90kg (79lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
MDF/Wood veneer |
MDF/Vinyl |
| Available Colors |
Oak |
Black, Walnut, White |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
Yes |
Yes |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |