In this review, we will be comparing Silver 200 7G and 703 S2, two Passive Floor-standing speakers from Monitor Audio and Bowers Wilkins.
Let's have a brief look at the main features
of Monitor Audio Silver 200 7G and B&W 703 S2 first before getting into our more
detailed comparison.
Monitor Audio Silver 200 7G Key Specs
- 2-way Design
- 1" gold dome C-CAM with uniform dispersion (UD) waveguide Tweeter
- 2 x 5.25" C-CAM RST II Woofer
- 34-35k Hz Frequency Response
- 87.5 dB Sensitivity
- Impedance: 8ohms
- Power Range:60-150watts
- Weight:13.77kg
- Dimensions (H x W x D): 920.0" x 9-15/16" x 13-1/16"( 920.0 x 253.0 x 332.0mm )
B&W 703 S2 Key Specs
- 3-way Design
- 1" Tweeter
- 6" Midrange
- 2 x 6.5" Aerofoil Woofer
- 6" Midrange
- 46-28k Hz Frequency Response
- 89 dB Sensitivity
- Impedance: 8ohms
- Power Range:30-200watts
- Weight:25.00kg
- Dimensions (H x W x D): 1025.0" x 12-11/16" x 12.6"( 1025.0 x 200.0 x 321.0mm )
What size room are the Monitor Audio Silver 200 7G and B&W 703 S2 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Monitor Audio Silver 200 7G |
B&W 703 S2 |
| Near-field |
Bad |
Bad |
| Small Room |
Poor |
Poor |
| Mid-size Room |
Good |
Good |
| Large Room |
Good |
Good |
| Very Large Room |
Poor |
Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the Monitor Audio Silver 200 7G and B&W 703 S2 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
One of the fundamental differences between these two speakers is that Silver 200 7G is a 2-way design whereas the 703 S2 is a 3-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
| Driver |
Monitor Audio Silver 200 7G |
B&W 703 S2 |
|
Driver Setup
|
2-way
|
3-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
1 x 6-inch |
|
Woofer
|
2 x 5.25-inch
|
2 x 6.5-inch
|
Silver 200 7G features a 1" gold dome C-CAM with uniform dispersion (UD) waveguide Tweeter and 2 x 5.25" C-CAM RST II Woofer . On the other hand, the 703 S2 features a 1" Tweeter , a 6" Midrange and 2 x 6.5" Aerofoil Woofer .
Frequency Response
Silver 200 7G has a frequency range of 34-35k Hz whereas 703 S2 has a frequency range of 46-28k Hz. With a minimum frequency of 34Hz, the Silver 200 7G can go significantly deeper on the low side and provide stronger bass compared to the 703 S2's min frequency of 46Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
Monitor Audio Silver 200 7G
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Silver 200 7G and 703 S2 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. Silver 200 7G sensitivity is rated at 87.5 dB and the 703 S2's is at 89 dB. This 1 dB difference makes the B&W 703 S2 a more sensitive speaker compared to Monitor Audio Silver 200 7G, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
Silver 200 7G can handle a max power of 200 watts RMS from the amp the whereas Silver 200 7G has a max power handling value of 150 watts RMS , 50 watts less than the 703 S2.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Both Silver 200 7G and 703 S2 features dual binding post speaker terminals for bi-amping or bi-wiring.
B&W 703 S2's Binding post terminals allows Bi-amping or bi-wiring
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Monitor Audio Silver 200 7G's and B&W 703 S2's external dimensions. Monitor Audio Silver 200 7G has external dimensions of 920.0 x 253.0 x 332.0mm ( 36-3/16 x 9-15/16 x 13-1/16inch) whereas B&W 703 S2 has external dimensions of 1025.0 x 200.0 x 321.0mm ( 40.4-inch x 12-11/16-inch x 12.6-inch) .
B&W 703 S2 is 53mm narrower and 11mm less deeper than Monitor Audio Silver 200 7G but it is also 105mm taller.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Monitor Audio Silver 200 7G is approximately 840.0cm2 / 130.2inch2 and base area of the B&W 703 S2 is approximately 642.0cm2 / 99.5inch2. The Silver 200 7G requires 31% more surface area than the 703 S2 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Monitor Audio Silver 200 7G weighs 13.77kg / 30.3lbs and the B&W 703 S2 weighs 25.00kg / 55lbs. This makes the 703 S2 82% heavier than the Silver 200 7G.
Here is a comparison of how Silver 200 7G and 703 S2's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
Monitor Audio Silver 200 7G
What's in the Box of Monitor Audio Silver 200 7G?
Here are the items that are included inside the box of Silver 200 7G:
Floorstanding loudspeakerGrille4 Outrigger feet4 Rubber feet (pre-installed on outrigger feet)4 Spikes4 Bolts4 Machine screws2 Foam port plugs2 Hex-keysOwners ManualImportant Safety Instructions
What's in the Box of B&W 703 S2?
Here are the items that come with the 703 S2:
Floorstanding loudspeakerGrillePlinth (base)2 Jumper-straps (pre-installed)Two-piece foam port plug4 Rubber feet4 Spike feet4 Lock-nuts4 Screws4 Washers4 Lock washersHex-keyManualBowers & Wilkins brochureWarranty Information
 Low Frequency Response |
34 Hz
vs
46 Hz
|
Generates deeper bass |
 High Frequency Response |
35k Hz
vs
28k Hz
|
Generates higher frequency |
 Height |
920mm
vs
1025mm
|
Easier to fit in smaller spaces |
 Price per pair* |
2100USD
vs
5000USD
|
costs less (*prices may change depending on the seller, location and time) |
 Max Input Power |
200 watts
vs
150 watts
|
Handle more power from your amplifier |
 Driver Setup |
3-way
vs
2-way
|
Have a dedicated mid-range driver |
 Sensitivity |
89 dB
vs
88 dB
|
Play louder with same amount of amplification power |
|
Woofer Size |
6.5 inches
vs
5.25 inches
|
Larger woofer |
 Base Surface Area |
642cm2
vs
840cm2
|
Takes less floor space |
| General |
Monitor Audio Silver 200 7G |
Bowers & Wilkins 703 S2 |
| Brand |
Monitor Audio |
Bowers Wilkins |
| Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
| Power Range |
60-150 watts |
30-200 watts |
| Sensitivity |
87.5 dB |
89 dB |
| Impedance |
8 ohms |
8 ohms |
| Impedance |
n/a |
3.1 ohms |
| Frequency Response |
34-35k Hz |
46-28k Hz |
Drivers |
|
|
| Woofer Quantity |
2 |
2 |
| Woofer Size |
5.25" |
6.5" |
| Woofer Composition |
C-CAM RST II |
Aerofoil |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
gold dome C-CAM with uniform dispersion (UD) waveguide |
n/a |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
6" |
| Firing Direction |
n/a |
rear |
Physical Specs |
|
|
| Height |
920.0mm (36.2") |
1025.0mm (40.4") |
| Width |
253.0mm (10") |
200.0mm (7.9") |
| Depth |
332.0mm (13.1") |
321.0mm (12.6") |
| Weight |
13.77kg (30.3lbs) |
25.00kg (55lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
MDF/Wood veneer |
MDF/Lacquer |
| Available Colors |
Oak |
Rosewood, Gloss Black, Satin White |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
Yes |
Yes |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |