In this review, we will be comparing CP-WT140LCR and 300 IW6 LCR, two Passive In-wall speakers from Monitor Audio and Focal. Let's have a brief look at the main features
of Monitor Audio CP-WT140LCR and Focal 300 IW6 LCR first before getting into our more
detailed comparison.
What size room are the Monitor Audio CP-WT140LCR and Focal 300 IW6 LCR speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Monitor Audio CP-WT140LCR and Focal 300 IW6 LCR compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
One of the fundamental differences between these two speakers is that CP-WT140LCR is a 2-way design whereas the 300 IW6 LCR is a 3-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
| Driver |
Monitor Audio CP-WT140LCR |
Focal 300 IW6 LCR |
|
Driver Setup
|
2-way
|
3-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
2 x 4-inch
|
2 x 6.5-inch
|
CP-WT140LCR features a 1" Hard-Dome Tweeter and 2 x 4" Polymer Woofer . On the other hand, the 300 IW6 LCR features a 1" Inverted Hard-Dome Tweeter and 2 x 6.5" Flax Woofer .
Frequency Response
CP-WT140LCR has a frequency range of 60-25kHz whereas 300 IW6 LCR has a frequency range of 40-28kHz. With a minimum frequency of 40Hz, the 300 IW6 LCR can go significantly deeper on the low side and provide stronger bass compared to the CP-WT140LCR's min frequency of 60Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the In-wall class in our database.
Low Frequency
In-wall Speakers
High Frequency
In-wall Speakers
Monitor Audio CP-WT140LCR
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
CP-WT140LCR is a 6 ohms speaker compared to the 300 IW6 LCR which has a nominal impedance of 8 ohms.
These two speakers also have different sensitivity levels. CP-WT140LCR sensitivity is rated at 88 dB and the 300 IW6 LCR's is rated at 92 dB. This 4 dB difference makes the Focal 300 IW6 LCR a more sensitive speaker compared to Monitor Audio CP-WT140LCR, hence will play louder with the same amount of watts.
Sensitivity
In-wall Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
CP-WT140LCR can handle a max power of 150 watts RMS from the amp the whereas CP-WT140LCR has a max power handling value of 100 watts RMS , 50 watts less than the 300 IW6 LCR.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
CP-WT140LCR features Spring post type posts and 300 IW6 LCR has a Spring post type posts. None of these speakers feature bi-amping/bi-wiring.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Monitor Audio CP-WT140LCR's and Focal 300 IW6 LCR's external dimensions. Monitor Audio CP-WT140LCR has external dimensions of 299.0 x 183.0 x 97.0mm ( 11.7500-inch x 7.1875-inch x 3.8125-inch) whereas Focal 300 IW6 LCR has external dimensions of 572.0 x 191.0 x 102.0mm ( 22.5000-inch x 7.5000-inch x 4.0000-inch) .
Focal 300 IW6 LCR is clearly the larger of the two speakers. Its body is 8mm wider, 273mm taller and 5mm deeper than Monitor Audio CP-WT140LCR.
What's in the Box of Monitor Audio CP-WT140LCR?
Here are the items that are included inside the box of CP-WT140LCR:
In-wall LCR loudspeakerMagnetic grilleCosmetic scrimInstallation GuideImportant Safety InstructionsLimited Warranty/Registration CardMountingTemplate
What's in the Box of Focal 300 IW6 LCR?
Here are the items that come with the 300 IW6 LCR:
One in-wall speaker1 metal-mesh grill (white)23.5