SpeakerDecision
  • SPEAKERS by TYPE
    • Passive Bookshelf Speakers
    • Passive Floor-standing Speakers
    • Passive Center Channel Speakers
    • Passive In-wall Speakers
    • All Passive Speakers
    • Powered Subwoofers
    • Powered Stereo Speakers
  • AMPLIFIERS
  • SMART FIND

Monitor Audio Bronze 2 vs Wharfedale 11.2 Comparison

x
Speaker to replace
Change

Monitor Audio Bronze 2

Passive Bookshelf | 42-30k Hz

Monitor Audio Bronze 2
CHECK PRICE
Change
    
Wharfedale 11.2

Passive Bookshelf | 48-20k Hz

Wharfedale Diamond 11.2
CHECK PRICE
Monitor Audio Bronze 2 Monitor Audio Bronze...
See at AMAZON
Wharfedale 11.2 Wharfedale 11.2
See at AMAZON
Monitor Audio Bronze...
See at AMAZON
Wharfedale 11.2
See at AMAZON
Monitor Audio Bronze 2 vs Wharfedale 11.2 Speaker Comparison

In this review, we will be comparing Bronze 2 and Diamond 11.2, two Passive Bookshelf speakers from Monitor Audio and Wharfedale.

Let's have a brief look at the main features of Monitor Audio Bronze 2 and Wharfedale 11.2 first before getting into our more detailed comparison.

Monitor Audio Bronze 2 Key Specs

  • 2-way Design
  • 1" Dome Tweeter
  • 6.5" C-CAM Woofer
  • 42-30k Hz Frequency Response
  • 90 dB Sensitivity
  • Impedance: 8ohms
  • Power Range:30-100watts
  • Weight:5.30kg
  • Dimensions (H x W x D): 350.0" x 7.2" x 11.0"( 350.0 x 185.0 x 281.0mm )

Wharfedale 11.2 Key Specs

  • 2-way Design
  • 1" Soft-Dome Tweeter
  • 6.5" Woven Kevlar Woofer
  • 48-20k Hz Frequency Response
  • 88 dB Sensitivity
  • Impedance: 8ohms
  • Power Range:25-125watts
  • Weight:9.00kg
  • Dimensions (H x W x D): 356.0" x 8-3/4" x 12-5/8"( 356.0 x 223.0 x 321.0mm )

What size room are the Monitor Audio Bronze 2 and Wharfedale 11.2 speakers good for?

The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:

Listening Environment* Monitor Audio Bronze 2 Wharfedale 11.2
Near-field Average Poor
Small Room Good Average
Mid-size Room Average Good
Large Room Poor Average
Very Large Room Bad Poor

(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2. Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)

In the following sections, we will get into more detail in order to better understand how the Monitor Audio Bronze 2 and Wharfedale 11.2 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.


**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.


Drivers

Both Bronze 2 and Diamond 11.2 are 2-way speakers.

Driver Monitor Audio Bronze 2 Wharfedale 11.2
Driver Setup 2-way 2-way
Tweeter 1-inch 1-inch
Midrange - -
Woofer 1 x 6.5-inch 1 x 6.5-inch

Bronze 2 features a 1" Dome Tweeter and 1 x 6.5" C-CAM Woofer with a Crossover frequency at 3100Hz. On the other hand, the Diamond 11.2 features a 1" Soft-Dome Tweeter and 1 x 6.5" Woven Kevlar Woofer .

Frequency Response

Bronze 2 has a frequency range of 42-30k Hz whereas Diamond 11.2 has a frequency range of 48-20k Hz. With a minimum frequency of 42Hz, the Bronze 2 can go significantly deeper on the low side and provide stronger bass compared to the Diamond 11.2's min frequency of 48Hz.

Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.

Low Frequency

Bookshelf Speakers

Bronze 2
Diamond 11.2
Min
Average
Max
High Frequency

Bookshelf Speakers

Monitor Audio Bronze 2
Wharfedale 11.2
Min
Average
Max

None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.

Impedance and Sensitivity

Bronze 2 and Diamond 11.2 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. Bronze 2 sensitivity is rated at 90 dB and the Diamond 11.2's is at 88 dB. This 2 dB difference makes the Monitor Audio Bronze 2 a more sensitive speaker compared to Wharfedale 11.2, hence will play louder with the same amount of watts.

Sensitivity

Bookshelf Speakers

Bronze 2
Diamond 11.2
Min
Average
Max

Power Range

Power range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.

Bronze 2 can handle a max power of 125 watts RMS from the amp the whereas Bronze 2 has a max power handling value of 100 watts RMS , 25 watts less than the Diamond 11.2.

Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters such as Impedance, sensitivity and system efficiencies.

Input Type and Bi-Amping / Bi-Wiring

Bronze 2 features Post posts which make bi-amping or bi-wiring possible. Diamond 11.2 has a Post which doesn't feature bi-amping/bi-wiring.

Wharfedale 11.2Post Terminals
Wharfedale 11.2's Post terminals

Cabinet Type and Port Position

Bronze 2 has a front firing port whereas Diamond 11.2 has a bottom firing ports. Monitor Audio Bronze 2's front-firing port gives more flexibility in placement in regards to proximity to walls compared to Wharfedale 11.2 with its rear-firing port.

Physical Specs

Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Monitor Audio Bronze 2's and Wharfedale 11.2's external dimensions. Monitor Audio Bronze 2 has external dimensions of 350.0 x 185.0 x 281.0mm ( 13.7 x 7.2 x 11.0inch) whereas Wharfedale 11.2 has external dimensions of 356.0 x 223.0 x 321.0mm ( 14 x 8-3/4 x 12-5/8inch) .

Wharfedale 11.2 is clearly the larger of the two speakers. Its body is 38mm wider, 6mm taller and 40mm deeper than Monitor Audio Bronze 2.

Below you can see the front view size comparison of Monitor Audio Bronze 2 and Wharfedale 11.2 in scale.

Monitor Audio Bronze 2 vs Wharfedale 11.2 Size Comparison - Front View
Comparison image of Monitor Audio Bronze 2 and Wharfedale 11.2 Size and External Dimensions

Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited. The base surface area of the Monitor Audio Bronze 2 is approximately 519.9cm2 / 80.6inch2 and base area of the Wharfedale 11.2 is approximately 715.8cm2 / 110.9inch2. The Bronze 2 requires 27% less surface area than the Diamond 11.2 which gives it a small advantage on placement in tight spaces.

Here is an another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:

Monitor Audio Bronze 2 vs Wharfedale 11.2 Size Comparison on a Media Console
Size Comparison image of Monitor Audio Bronze 2 and Wharfedale 11.2 on a Media Console
Weight Comparison

The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Monitor Audio Bronze 2 weighs 5.30kg / 11.7lbs and the Wharfedale 11.2 weighs 9.00kg / 19.8lbs. This makes the Diamond 11.2 70% heavier than the Bronze 2.

Here is a comparison of how Bronze 2 and Diamond 11.2's weights compare with the average, max and min weights in Passive Bookshelf class.

Weight
All Bookshelf Speakers
Monitor Audio Bronze 2
Wharfedale 11.2
Min
Average
Max

What's in the Box of Monitor Audio Bronze 2?

Here are the items that are included inside the box of Bronze 2:
  • 2 Bookshelf loudspeakers
  • 2 Grilles
  • 2 Foam port plugs
  • Hex-key
  • Owner's Manual
  • Important Safety Instructions
  • What's in the Box of Wharfedale 11.2?

    Here are the items that come with the Diamond 11.2:
  • 2 Bookshelf loudspeakers
  • 2 Grilles (pre-installed)
  • 8 Self-adhesive rubber feet
  • User-feets Manual
  • Installation Guide

  • Reasons to choose Monitor Audio Bronze 2 over Wharfedale Diamond 11.2
    Sensitivity 90 dB vs 88 dB Play louder with same amount of amplification power
    Low Frequency Response 42 Hz vs 48 Hz Generates deeper bass
    High Frequency Response 30k Hz vs 20k Hz Generates higher frequency
    Bi-Amping and Bi-Wiring Yes vs No Allows bi-amping and bi-wiring connections
    Height 350mm vs 356mm Easier to fit in smaller spaces
    Base Surface Area 519cm2 vs 715cm2 Takes less floor space

    Reasons to choose Wharfedale Diamond 11.2 over Monitor Audio Bronze 2

    Max Input Power 125 watts vs 100 watts Handle more power from your amplifier
    Monitor Audio Bronze 2 vs Wharfedale 11.2 Specs Table
    Detailed comparison of specifications
    General Monitor Audio Bronze 2 Wharfedale Diamond 11.2
    Brand Monitor Audio Wharfedale
    Speaker Type Bookshelf speakers Bookshelf speakers
    Power Range 30-100 watts 25-125 watts
    Sensitivity 90 dB 88 dB
    Impedance 8 ohms 8 ohms
    Frequency Response 42-30k Hz 48-20k Hz
    Drivers
    Woofer Quantity 1 1
    Woofer Size 6.5" 6.5"
    Woofer Composition C-CAM Woven Kevlar
    Woofer Surround Material Rubber Foam
    Tweeter Size 1" 1"
    Tweeter Type Dome Soft-Dome
    Aimable Tweeter No No
    Midrange Driver No No
    Crossover Frequency 3100Hz n/a
    Firing Direction front bottom
    Physical Specs
    Height 350.0mm (13.8") 356.0mm (14")
    Width 185.0mm (7.3") 223.0mm (8.8")
    Depth 281.0mm (11.1") 321.0mm (12.6")
    Weight 5.30kg (11.7lbs) 9.00kg (19.8lbs)
    Enclosure Bass Reflex Bass Reflex
    Finish MDF/Wood-grain vinyl MDF/Wood veneer
    Available Colors Walnut, White, Rosemah, Black Rosewood, Black, White, Walnut
    Mounting Bracket No No
    Recommended Stand Height 30-31" 24-28"
    Grille Yes Yes
    Moisture Resistancy No No
    Connections
    Biamp Inputs Yes No
    Other
    Parts Warranty 5 Years 5 Years
    Labor Warranty 5 Years 5 Years

    Most Popular Speakers
    Klipsch Reference R-51M
    Klipsch R-51M
    2-way | 93 dB | 8 ohms
    Wharfedale Elysian 2
    Wharfedale Elysian 2
    3-way | 89 dB | 4 ohms
    ELAC Debut 2.0 B6.2
    ELAC Debut 2.0 B6.2
    2-way | 87 dB | 6 ohms
    Bowers & Wilkins 606 S2 Anniversary Edition
    B&W 606 S2
    2-way | 88 dB | 8 ohms
    KEF Q150
    KEF Q150
    2-way | 86 dB | 8 ohms
    Klipsch Reference Premiere RP-500M
    Klipsch RP-500M
    2-way | 93 dB | 8 ohms
    Wharfedale EVO4.1
    Wharfedale EVO4.1
    2-way | 87 dB | 8 ohms
    Bowers & Wilkins 606
    B&W 606
    2-way | 88 dB | 8 ohms
    Copyright © 2025 by SpeakerDecision
    About Privacy Contact US Camera Decision

    Report a Correction