In this review, we will be comparing SourcePoint 10 and Elysian 1, two Passive Bookshelf speakers from MoFi and Wharfedale. Let's have a brief look at the main features
of MoFi SourcePoint 10 and Wharfedale Elysian 1 first before getting into our more
detailed comparison.
What size room are the MoFi SourcePoint 10 and Wharfedale Elysian 1 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the MoFi SourcePoint 10 and Wharfedale Elysian 1 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both SourcePoint 10 and Elysian 1 are 2-way speakers.
Driver |
MoFi SourcePoint 10 |
Wharfedale Elysian 1 |
Driver Setup
|
2-way
|
2-way
|
Tweeter
|
1.25-inch
|
27x90mm-inch
|
Midrange
|
- |
- |
Woofer
|
1 x 10-inch
|
1 x 7-inch
|
SourcePoint 10 features a 1.25" wide roll soft dome Tweeter and 1 x 10" Paper-pulp Woofer with a Crossover frequency at 1600 Hz. On the other hand, the Elysian 1 features a 27x90mm" AMT (Ribbon) Tweeter and 1 x 7" Coated Fiberglass Woofer with a Crossover frequency at 2500Hz.
Frequency Response
SourcePoint 10 has a frequency range of 42-30k Hz whereas Elysian 1 has a frequency range of 49-22k Hz. With a minimum frequency of 42Hz, the SourcePoint 10 can go significantly deeper on the low side and provide stronger bass compared to the Elysian 1's min frequency of 49Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
SourcePoint 10 is a 8 ohms speaker compared to the Elysian 1 which has a nominal impedance of 4 ohms. Lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit especially when played at high volume levels, so make sure the amp you pair with the Elysian 1 can provide this impedance level.
These two speakers also have different sensitivity levels. SourcePoint 10 sensitivity is rated at 91dB and the Elysian 1's is rated at 89 dB. This 2 dB difference makes the MoFi SourcePoint 10 a more sensitive speaker compared to Wharfedale Elysian 1, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
SourcePoint 10 can handle a max power of 200 watts RMS from the amp the whereas Elysian 1 has a max power handling value of 175 watts RMS, 25 watts less than the SourcePoint 10.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Elysian 1 features Binding post posts which make bi-amping or bi-wiring possible. SourcePoint 10 has a 5-Way post which doesn't feature bi-amping/bi-wiring.
Cabinet Type and Port Position
SourcePoint 10 has a rear firing port whereas Elysian 1 has a bottom firing ports. Wharfedale Elysian 1's bottom-firing port gives more flexibility in placement in regards to proximity to walls compared to MoFi SourcePoint 10 with its rear-firing port.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare MoFi SourcePoint 10's and Wharfedale Elysian 1's external dimensions. MoFi SourcePoint 10 has external dimensions of 572 x 368 x 406mm ( 22.5 x 14.5 x 16 inch) whereas Wharfedale Elysian 1 has external dimensions of 458.0 x 264.0 x 316.0mm ( 18-24 x 10-3/8 x 12-7/16inch) .
MoFi SourcePoint 10 is clearly the larger of the two speakers. Its body is 104mm wider, 114mm taller and 106mm deeper than Wharfedale Elysian 1.
Below you can see the front view size comparison of MoFi SourcePoint 10 and Wharfedale Elysian 1 in scale.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the MoFi SourcePoint 10 is approximately 1552.0cm2 / 240.6inch2 and base area of the Wharfedale Elysian 1 is approximately 834.2cm2 / 129.3inch2. The SourcePoint 10 requires 86% more surface area than the Elysian 1 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The MoFi SourcePoint 10 weighs 21.00kg / 46.2lbs and the Wharfedale Elysian 1 weighs 15.03kg / 33.1lbs. This makes the SourcePoint 10 40% heavier than the Elysian 1.
Here is a comparison of how SourcePoint 10 and Elysian 1's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Wharfedale Elysian 1?
Here are the items that come with the Elysian 1:
2 Stand-mount loudspeakers2 Grilles4 Terminal-jumpers (pre-installed)User Manual
Max Input Power |
200 watts
vs
175 watts
|
Handle more power from your amplifier |
Sensitivity |
91 dB
vs
89 dB
|
Play louder with same amount of amplification power |
Nominal Impedance |
8 ohms
vs
4 ohms
|
Less selective with amplifiers |
Minimum Impedance |
6.2 ohms
vs
3.8 ohms
|
Very low impedance levels puts more pressure on amplifier |
Woofer Size |
10 inches
vs
7 inches
|
Larger woofer |
Low Frequency Response |
42 Hz
vs
49 Hz
|
Generates deeper bass |
High Frequency Response |
30k Hz
vs
22k Hz
|
Generates higher frequency |
Price per pair* |
3699USD
vs
4995USD
|
costs less (*prices may change depending on the seller, location and time) |
Bi-Amping and Bi-Wiring |
Yes
vs
No
|
Allows bi-amping and bi-wiring connections |
Height |
458mm
vs
572mm
|
Easier to fit in smaller spaces |
Base Surface Area |
834cm2 (264x316mm)
vs
1552cm2 (368x422mm)
|
Takes less floor space |
General |
MoFi SourcePoint 10 |
Wharfedale Elysian 1 |
Brand |
MoFi |
Wharfedale |
Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
Power Range |
30-200 watts |
25-175 watts |
Sensitivity |
91dB |
89 dB |
Impedance |
8 ohms |
4 ohms |
Impedance |
6.2 ohms |
3.8 ohms |
Frequency Response |
42-30k Hz |
49-22k Hz |
Drivers |
|
|
Woofer Quantity |
1 |
1 |
Woofer Size |
10" |
7" |
Woofer Composition |
Paper-pulp |
Coated Fiberglass |
Woofer Surround Material |
n/a |
Foamed Rubber |
Tweeter Size |
1.25" |
27x90mm" |
Tweeter Type |
wide roll soft dome |
AMT (Ribbon) |
Aimable Tweeter |
No |
No |
Midrange Driver |
No |
No |
Crossover Frequency |
1600 Hz |
2500Hz |
Firing Direction |
rear |
bottom |
Physical Specs |
|
|
Height |
572.0mm (22.5") |
458.0mm (18") |
Width |
368.0mm (14.5") |
264.0mm (10.4") |
Depth |
422.0mm (16.6") |
316.0mm (12.4") |
Weight |
21.00kg (46.2lbs) |
15.03kg (33.1lbs) |
Enclosure |
Bass Reflex |
Bass Reflex |
Finish |
real wood veneer |
MDF/Lacquer |
Available Colors |
Satin Walnut, Satin Black Ash |
Piano Black, Piano Walnut,White |
Mounting Bracket |
No |
No |
Recommended Stand Height |
n/a |
18-24" |
Grille |
Yes |
Yes |
Moisture Resistancy |
No |
No |
Connections |
|
|
Biamp Inputs |
No |
Yes |
Other |
|
|
Parts Warranty |
|
5 Years |
Labor Warranty |
|
5 Years |