In this review, we will be comparing SourcePoint 10 and Kanta No.1, two Passive Bookshelf speakers from MoFi and Focal.
Let's have a brief look at the main features
of MoFi SourcePoint 10 and Focal Kanta No.1 first before getting into our more
detailed comparison.
MoFi SourcePoint 10 Key Specs
- 2-way Design
- 1.25" wide roll soft dome Tweeter
- 10" Paper-pulp Woofer
- 42-30k Hz Frequency Response
- 91dB Sensitivity
- Impedance: 8ohms
- Power Range:30-200watts
- Weight:21.00kg
- Dimensions (H x W x D): 572.0" x 14.5" x 16"( 572 x 368 x 406mm )
Focal Kanta No.1 Key Specs
- 2-way Design
- 1.1" Hard-Dome Tweeter
- 6.5" Flax Woofer
- 46-40k Hz Frequency Response
- 88 dB Sensitivity
- Impedance: 8ohms
- Power Range:25-150watts
- Weight:13.05kg
- Dimensions (H x W x D): 609.6" x 9-1/4" x 15-7/16"( 609.6 x 228.6 x 393.0mm )
What size room are the MoFi SourcePoint 10 and Focal Kanta No.1 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
MoFi SourcePoint 10 |
Focal Kanta No.1 |
| Near-field |
Poor |
Poor |
| Small Room |
Average |
Average |
| Mid-size Room |
Good |
Good |
| Large Room |
Average |
Average |
| Very Large Room |
Poor |
Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the MoFi SourcePoint 10 and Focal Kanta No.1 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both SourcePoint 10 and Kanta No.1 are 2-way speakers.
| Driver |
MoFi SourcePoint 10 |
Focal Kanta No.1 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1.25-inch
|
1.1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 10-inch
|
1 x 6.5-inch
|
SourcePoint 10 features a 1.25" wide roll soft dome Tweeter and 1 x 10" Paper-pulp Woofer with a Crossover frequency at 1600 Hz. On the other hand, the Kanta No.1 features a 1.1" Hard-Dome Tweeter and 1 x 6.5" Flax Woofer with a Crossover frequency at 2400 Hz.
Frequency Response
SourcePoint 10 has a frequency range of 42-30k Hz whereas Kanta No.1 has a frequency range of 46-40k Hz. With a minimum frequency of 42Hz, the SourcePoint 10 can go slightly deeper then the Kanta No.1's min frequency of 46Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
SourcePoint 10 and Kanta No.1 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. SourcePoint 10 sensitivity is rated at 91dB and the Kanta No.1's is at 88 dB. This 3 dB difference makes the MoFi SourcePoint 10 a more sensitive speaker compared to Focal Kanta No.1, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
SourcePoint 10 can handle a max power of 200 watts RMS from the amp the whereas Kanta No.1 has a max power handling value of 150 watts RMS, 50 watts less than the SourcePoint 10.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
SourcePoint 10 features Binding post type posts and Kanta No.1 has a Binding post type posts. None of these speakers feature bi-amping/bi-wiring.
MoFi SourcePoint 10's 5-Way post terminals
Focal Kanta No.1's Binding post terminals
Cabinet Type and Port Position
Both SourcePoint 10 and Kanta No.1 have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare MoFi SourcePoint 10's and Focal Kanta No.1's external dimensions. MoFi SourcePoint 10 has external dimensions of 572 x 368 x 406mm ( 22.5 x 14.5 x 16 inch) whereas Focal Kanta No.1 has external dimensions of 609.6 x 228.6 x 393.0mm ( 24-28inch x 9-1/4inch x 15-7/16inch ) .
Focal Kanta No.1 is 139.4mm narrower and 29mm less deeper than MoFi SourcePoint 10 but it is also 37.6mm taller.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the MoFi SourcePoint 10 is approximately 1552.0cm2 / 240.6inch2 and base area of the Focal Kanta No.1 is approximately 898.4cm2 / 139.3inch2. The SourcePoint 10 requires 73% more surface area than the Kanta No.1 which gives it a small disadvantage on placement in tight spaces.