In this review, we will be comparing Motion LX16 and Q350, two Passive Bookshelf speakers from MartinLogan and KEF. Let's have a brief look at the main features
of MartinLogan LX16 and KEF Q350 first before getting into our more
detailed comparison.
What size room are the MartinLogan LX16 and KEF Q350 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the MartinLogan LX16 and KEF Q350 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Motion LX16 and Q350 are 2-way speakers.
Driver |
MartinLogan LX16 |
KEF Q350 |
Driver Setup
|
2-way
|
2-way
|
Tweeter
|
1.0 x 1.4-inch
|
1-inch
|
Midrange
|
- |
- |
Woofer
|
1 x 5.25-inch
|
1 x 6.5-inch
|
Motion LX16 features a 1.0 x 1.4" Folded Motion Tweeter and 1 x 5.25" Aluminum Woofer with a Crossover frequency at 2700Hz. On the other hand, the Q350 features a 1" vented aluminum Dome Tweeter and 1 x 6.5" Aluminum Woofer with a Crossover frequency at 2500Hz.
Frequency Response
Motion LX16 has a frequency range of 60-25k Hz whereas Q350 has a frequency range of 63-28k Hz. With a minimum frequency of 60Hz, the Motion LX16 can go slightly deeper then the Q350's min frequency of 63Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Motion LX16 is a 5 ohms speaker compared to the Q350 which has a nominal impedance of 8 ohms.
These two speakers also have different sensitivity levels. Motion LX16 sensitivity is rated at 92 dB and the Q350's is rated at 87 dB. This 5 dB difference makes the MartinLogan LX16 a more sensitive speaker compared to KEF Q350, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Motion LX16 can handle a max power of 200 watts RMS from the amp the whereas Q350 has a max power handling value of 120 watts RMS, 80 watts less than the Motion LX16.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Motion LX16 features Post type posts and Q350 has a Post type posts. None of these speakers feature bi-amping/bi-wiring.
Cabinet Type and Port Position
Both Motion LX16 and Q350 have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare MartinLogan LX16's and KEF Q350's external dimensions. MartinLogan LX16 has external dimensions of 280.0 x 165.0 x 242.0mm ( 11.0 x 6.4 x 9.5inch) whereas KEF Q350 has external dimensions of 358.0 x 210.0 x 306.0mm ( 14.0 x 8.2 x 12.0inch) .
KEF Q350 is clearly the larger of the two speakers. Its body is 45mm wider, 78mm taller and 64mm deeper than MartinLogan LX16.
Below you can see the front view size comparison of MartinLogan LX16 and KEF Q350 in scale.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the MartinLogan LX16 is approximately 399.3cm2 / 61.9inch2 and base area of the KEF Q350 is approximately 642.6cm2 / 99.6inch2. The Motion LX16 requires 38% less surface area than the Q350 which gives it a small advantage on placement in tight spaces.
Here is an another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The MartinLogan LX16 weighs 5.40kg / 11.9lbs and the KEF Q350 weighs 7.60kg / 16.7lbs. This makes the Q350 41% heavier than the Motion LX16.
Here is a comparison of how Motion LX16 and Q350's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of MartinLogan LX16?
Here are the items that are included inside the box of Motion LX16:
Bookshelf loudspeakerMagnetic grille4 Rubber bumpersUser's Manual (En/Fr)
What's in the Box of KEF Q350?
Here are the items that come with the Q350:
2 Bookshelf loudspeakers 2 Foam port plugs 8 Self-adhesive rubber feet Owner's Manual Warranty Registration Card
Max Input Power |
200 watts
vs
120 watts
|
Handle more power from your amplifier |
Sensitivity |
92 dB
vs
87 dB
|
Play louder with same amount of amplification power |
Low Frequency Response |
60 Hz
vs
63 Hz
|
Generates deeper bass |
Mounting Bracket |
Yes
vs
No
|
Allows mounting on walls |
Height |
280mm
vs
358mm
|
Easier to fit in smaller spaces |
Base Surface Area |
399cm2 (165x242mm)
vs
642cm2 (210x306mm)
|
Takes less floor space |
Nominal Impedance |
8 ohms
vs
5 ohms
|
Less selective with amplifiers |
Woofer Size |
6.5 inches
vs
5.25 inches
|
Larger woofer |
High Frequency Response |
28k Hz
vs
25k Hz
|
Generates higher frequency |
General |
MartinLogan Motion LX16 |
KEF Q350 |
Brand |
MartinLogan |
KEF |
Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
Power Range |
20-200 watts |
10-120 watts |
Sensitivity |
92 dB |
87 dB |
Impedance |
5 ohms |
8 ohms |
Impedance |
n/a |
3.7 ohms |
Frequency Response |
60-25k Hz |
63-28k Hz |
Drivers |
|
|
Woofer Quantity |
1 |
1 |
Woofer Size |
5.25" |
6.5" |
Woofer Composition |
Aluminum |
Aluminum |
Woofer Surround Material |
Rubber |
Rubber |
Tweeter Size |
1.0 x 1.4" |
1" |
Tweeter Type |
Folded Motion |
Dome |
Aimable Tweeter |
No |
No |
Midrange Driver |
No |
No |
Crossover Frequency |
2700Hz |
2500Hz |
Firing Direction |
rear |
rear |
Suggested Break-in Period |
Allow 72 hours of break-in at 90 dB |
n/a |
Physical Specs |
|
|
Height |
280.0mm (11") |
358.0mm (14.1") |
Width |
165.0mm (6.5") |
210.0mm (8.3") |
Depth |
242.0mm (9.5") |
306.0mm (12") |
Weight |
5.40kg (11.9lbs) |
7.60kg (16.7lbs) |
Enclosure |
Bass Reflex |
Bass Reflex |
Finish |
Piano Lacquer |
MDF/Vinyl-wrapped |
Available Colors |
Cherry (dark) |
Black, Walnut, White |
Mounting Bracket |
3/18-16 threaded insert |
No |
Recommended Stand Height |
28-31" |
18-24" |
Grille |
Yes |
Yes |
Moisture Resistancy |
No |
No |
Connections |
|
|
Biamp Inputs |
No |
No |
Other |
|
|
Parts Warranty |
5 Yrs w/Registration |
5 Years |
Labor Warranty |
5 Yrs w/Registration |
5 Years |