In this review, we will be comparing two different type of speakers by Klipsch. Klipsch Reference R-52C is a Center Channel speaker whereas the RF-7 III is a Floor-standing speaker.
Let's have a brief look at the main features
of Klipsch R-52C and Klipsch RF-7 III first before getting into our more
detailed comparison.
Klipsch R-52C Key Specs
- 2-way Design
- 1" Tractrix horn Tweeter
- 2 x 5.25" copper spun IMG Woofer
- 89-21k Hz Frequency Response
- 95 dB Sensitivity
- Impedance: 8ohms
- Power Range:up to 100watts
- Weight:3.18kg
- Dimensions (H x W x D): 180.0" x 18-13/16" x 7-11/16"( 180.0 x 478.0 x 196.0mm )
Klipsch RF-7 III Key Specs
- 2-way Design
- 1.75" dome Tweeter
- 2 x 10" Cerametallic Woofer
- 32-25k Hz Frequency Response
- 100 dB Sensitivity
- Impedance: 8ohms
- Power Range:up to 250watts
- Weight:44.10kg
- Dimensions (H x W x D): 1247.0" x 13-15/16" x 17-15/16"( 1247.0 x 355.0 x 456.0mm )
What size room are the Klipsch R-52C and Klipsch RF-7 III speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Klipsch R-52C |
Klipsch RF-7 III |
| Near-field |
Average |
Bad |
| Small Room |
Good |
Poor |
| Mid-size Room |
Average |
Average |
| Large Room |
Poor |
Good |
| Very Large Room |
Bad |
Average |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the Klipsch R-52C and Klipsch RF-7 III compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both R-52C and RF-7 III are 2-way speakers.
| Driver |
Klipsch R-52C |
Klipsch RF-7 III |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1.75-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
2 x 5.25-inch
|
2 x 10-inch
|
R-52C features a 1" aluminum Tractrix horn Tweeter and 2 x 5.25" copper spun IMG Woofer . On the other hand, the RF-7 III features a 1.75" titanium dome Tweeter and 2 x 10" Cerametallic Woofer with a Crossover frequency at 1300Hz.
Frequency Response
R-52C has a frequency range of 89-21k Hz whereas RF-7 III has a frequency range of 32-25k Hz. With a minimum frequency of 32Hz, the RF-7 III can go significantly deeper on the low side and provide stronger bass compared to the R-52C's min frequency of 89Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Center Channel class in our database.
Low Frequency
Center Channel Speakers
High Frequency
Center Channel Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
R-52C and RF-7 III have the same Impedance of 8 ohms but where they differ is the sensitivity levels. R-52C sensitivity is rated at 95 dB and the RF-7 III's is at 100 dB. This 5 dB difference makes the Klipsch RF-7 III a more sensitive speaker compared to Klipsch R-52C, hence will play louder with the same amount of watts.
Sensitivity
Center Channel Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
R-52C can handle a max power of 250 watts RMS from the amp the whereas R-52C has a max power handling value of 100 watts RMS , 150 watts less than the RF-7 III.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
RF-7 III features Binding post posts which make bi-amping or bi-wiring possible. R-52C has a Binding post which doesn't feature bi-amping/bi-wiring.
Klipsch R-52C's Binding post terminals
Klipsch RF-7 III's Binding post terminals allows Bi-amping or bi-wiring
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Klipsch R-52C's and Klipsch RF-7 III's external dimensions. Klipsch R-52C has external dimensions of 180.0 x 478.0 x 196.0mm ( 7-1/16 x 18-13/16 x 7-11/16inch) whereas Klipsch RF-7 III has external dimensions of 1247.0 x 355.0 x 456.0mm ( 49-1/16 x 13-15/16 x 17-15/16inch) .
Klipsch R-52C is 1067mm shorter and 260mm less deeper than Klipsch RF-7 III but it is also 123mm wider.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Klipsch R-52C is approximately 936.9cm2 / 145.2inch2 and base area of the Klipsch RF-7 III is approximately 1618.8cm2 / 250.9inch2. The R-52C requires 42% less surface area than the RF-7 III which gives it a small advantage on placement in tight spaces.
What's in the Box of Klipsch R-52C?
Here are the items that are included inside the box of R-52C:
Center-channel loudspeakerGrille (installed)4 Self-adhesive rubber feetQuick Setup GuideImportant Safety InstructionsWarranty Information
What's in the Box of Klipsch RF-7 III?
Here are the items that come with the RF-7 III:
Floorstanding loudspeakerPlinthGrille4 Spike feet4 Rubber feet2 Jumpers (pre-installed)4 Machine screwsOwners Manual